[Sun Jun  3 03:30:02 2012] Detection parameters:
  Position = (361.4, 256.7) = 11 31 26.78 31 12 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.1 +/- 16.9
  Background counts = 9.8
  Rate = 0.01 +/- 0.001

[Sun Jun  3 03:30:02 2012] Off-axis axis estimate = 5.48'
[Sun Jun  3 05:16:19 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 05:16:19 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Sun Jun  3 05:16:19 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.919
[Sun Jun  3 05:16:19 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.17"
[Sun Jun  3 05:49:37 2012] fullrun_mos1_xmm0550960301_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun  3 05:49:37 2012] fullrun_mos1_xmm0550960301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun  3 05:49:37 2012] Fit fullrun_mos1_xmm0550960301_pi300-10000_cl_pass0_src4 appears to have run properly
[Sun Jun  3 05:49:37 2012] fullrun_mos1_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun  3 05:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun  3 05:49:37 2012] fullrun_mos1_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun  3 05:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun  3 05:49:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 06:19:18 2012] Spatial fit model total counts = 247.421000, observed total counts = 239.000000
[Sun Jun  3 06:19:18 2012] Offset between fit and detection position for source 18 = 0.133038 pixels
[Sun Jun  3 06:19:18 2012] 245.341000 total counts/ 116.275000 bgd. counts: snr = 11.969298
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.133038 pixels
  Position = (361.4, 256.6) = 11 31 26.79 31 12 39.9
  Extent = 5.7 (4.8-6.6)" x 4.9 (3.9-5.8)", rotation angle = 322 (246-0) degrees
  Source counts = 129.1 +/- 15.7
  Background counts = 116.3
  Rate = 0.006 +/- 0.0007
[Sun Jun  3 06:19:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 06:19:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 06:19:18 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 06:19:18 2012] Source does appear to be extended
[Sun Jun  3 06:19:18 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.82
[Sun Jun  3 07:54:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 07:54:39 2012] Initial guess for spatial extent in simple fitting = 5.30"
[Sun Jun  3 07:54:39 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.763
[Sun Jun  3 07:54:39 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.30"
[Sun Jun  3 08:23:21 2012] fullrun_mos1_xmm0550960301_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun  3 08:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550960301_pi300-10000_cl_pass1_src4.csv
[Sun Jun  3 08:23:21 2012] fullrun_mos1_xmm0550960301_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun  3 08:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550960301_pi300-10000_cl_pass1_src4.csv
[Sun Jun  3 08:23:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550960301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550960301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 08:23:22 2012] fullrun_mos1_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun  3 08:23:22 2012] fullrun_mos1_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun  3 08:23:22 2012] Fit fullrun_mos1_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Jun  3 08:55:09 2012] Spatial fit model total counts = 249.472000, observed total counts = 242.000000
[Sun Jun  3 08:55:09 2012] Offset between fit and detection position for source 18 = 0.031167 pixels
[Sun Jun  3 08:55:09 2012] 248.528000 total counts/ 117.758000 bgd. counts: snr = 12.050718
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.031167 pixels
  Position = (361.4, 256.6) = 11 31 26.79 31 12 39.8
  Extent = 5.4 (4.5-6.4)", rotation angle = 0
  Source counts = 130.8 +/- 15.8
  Background counts = 117.8
  Rate = 0.006 +/- 0.0007
[Sun Jun  3 08:55:09 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 08:55:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 08:55:09 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 08:55:09 2012] Source does appear to be extended
[Sun Jun  3 08:55:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 10:13:36 2012] XMMSAS src. selection expression = ellipse(31392.731600, 22271.719800, 325.336209, 325.336209, 0.000000, X, Y)
[Sun Jun  3 10:13:36 2012] Writing source region out to fullrun_mos1_xmm0550960301_pi300-10000_pass1_cl_src18_src.reg
[Sun Jun  3 10:13:36 2012] Extracting stamp from image fullrun_mos1_xmm0550960301_pi300-10000_cl_sm2.00.img.gz, (343, 238) - (380, 275)
[Sun Jun  3 10:13:36 2012] XMMSAS bgd. selection expression = annulus(31392.731600, 22271.719800, 542.227016, 1084.454031, X, Y)
[Sun Jun  3 10:13:36 2012] Writing fullrun_mos1_xmm0550960301_pi300-10000_pass1_cl_src18.gif
[Sun Jun  3 10:17:42 2012] Mean detx,y = (4420.36, -4440.29) 
[Sun Jun  3 10:17:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 10:17:52 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 10:17:52 2012] Setting source spectrum file to fullrun_mos1_xmm0550960301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jun  3 10:17:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550960301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Jun  3 11:17:00 2012] Updating aperture counts using extracted products
[Sun Jun  3 11:17:00 2012] Error reading totcts from fullrun_mos1_xmm0550960301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jun  3 11:17:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 11:17:02 2012] Using photon index=1.80, rate=0.00562, arf fullrun_mos1_xmm0550960301_pi300-10000_pass1_cl_src18.arf
[Sun Jun  3 11:17:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 11:17:02 2012] Updating source flux to 9.1e-14
[Sun Jun  3 11:17:32 2012] Reading fit data from xmm0550960301/analysis//spectral/fullrun_mos1_xmm0550960301_pi300-10000_pass1_cl_src18_pl.csv
[Sun Jun  3 11:17:32 2012] Spectral fit parameter nH value = 3.96492e+12
[Sun Jun  3 11:17:32 2012] Spectral fit parameter PhoIndex value = 1.81262
[Sun Jun  3 11:17:32 2012] Failed to get F(0.3-8.0) from xmm0550960301/analysis//spectral/fullrun_mos1_xmm0550960301_pi300-10000_pass1_cl_src18_pl.csv, possibly due to different flux energy range selected
[Sun Jun  3 11:17:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 11:17:32 2012] Using Nh = 4e+12, photon index=1.81, rate=0.00562, arf fullrun_mos1_xmm0550960301_pi300-10000_pass1_cl_src18.arf
[Sun Jun  3 11:17:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 11:17:32 2012] Updating source flux to 9.1e-14