[Sun Aug 19 13:22:09 2012] Detection parameters:
  Position = (365.9, 350.2) = 1 32 26.47 -13 30 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.8 +/- 20.7
  Background counts = 86.5
  Rate = 0.004 +/- 0.0005

[Sun Aug 19 13:22:10 2012] Off-axis axis estimate = 6.17'
[Sun Aug 19 16:12:37 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 16:12:37 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Sun Aug 19 16:12:37 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.039
[Sun Aug 19 16:12:37 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 9.51"
[Sun Aug 19 17:40:06 2012] fullrun_mos1_xmm0550960101_pi300-10000_cl_pass0_src8.ximg exists
[Sun Aug 19 17:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550960101_pi300-10000_cl_pass0_src8.csv
[Sun Aug 19 17:40:06 2012] fullrun_mos1_xmm0550960101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Aug 19 17:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550960101_pi300-10000_cl_pass0_src8.csv
[Sun Aug 19 17:40:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550960101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550960101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 17:40:07 2012] fullrun_mos1_xmm0550960101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Aug 19 17:40:07 2012] fullrun_mos1_xmm0550960101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Aug 19 17:40:07 2012] Fit fullrun_mos1_xmm0550960101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Aug 19 19:33:03 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.878729 pixels away
[Sun Aug 19 19:33:03 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 19:33:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 19:33:03 2012] Assessing source extent using major
[Sun Aug 19 19:33:03 2012] Source does appear to be extended
[Sun Aug 19 19:33:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 21:08:27 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 21:08:27 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Sun Aug 19 21:08:27 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.039
[Sun Aug 19 21:08:27 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 9.51"
[Mon Aug 20 02:25:06 2012] fullrun_mos1_xmm0550960101_pi300-10000_cl_pass1_src8.ximg exists
[Mon Aug 20 02:25:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550960101_pi300-10000_cl_pass1_src8.csv
[Mon Aug 20 02:25:06 2012] fullrun_mos1_xmm0550960101_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon Aug 20 02:25:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550960101_pi300-10000_cl_pass1_src8.csv
[Mon Aug 20 02:25:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550960101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550960101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 02:25:06 2012] fullrun_mos1_xmm0550960101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon Aug 20 02:25:06 2012] fullrun_mos1_xmm0550960101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Aug 20 02:25:06 2012] Fit fullrun_mos1_xmm0550960101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Aug 20 04:52:37 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.878729 pixels away
[Mon Aug 20 04:52:37 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 04:52:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 04:52:37 2012] Assessing source extent using major
[Mon Aug 20 04:52:37 2012] Source does appear to be extended
[Mon Aug 20 04:52:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 05:48:54 2012] XMMSAS src. selection expression = ellipse(31786.814636, 30419.474548, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 05:48:54 2012] Writing source region out to fullrun_mos1_xmm0550960101_pi300-10000_pass1_cl_src16_src.reg
[Mon Aug 20 05:48:54 2012] Extracting stamp from image fullrun_mos1_xmm0550960101_pi300-10000_cl_sm2.00.img.gz, (328, 313) - (403, 388)
[Mon Aug 20 05:48:54 2012] XMMSAS bgd. selection expression = annulus(31786.814636, 30419.474548, 1087.500000, 2175.000000, X, Y) && !ellipse(32032.986298, 33201.623993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33197.158200, 31123.742000, 1372.624039, 1372.624039, 0.000000, X, Y)
[Mon Aug 20 05:48:54 2012] Writing fullrun_mos1_xmm0550960101_pi300-10000_pass1_cl_src16.gif
[Mon Aug 20 06:00:59 2012] Mean detx,y = (5478.49, 1340.47) 
[Mon Aug 20 06:01:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 06:01:34 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 06:01:34 2012] Setting source spectrum file to fullrun_mos1_xmm0550960101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Aug 20 06:01:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550960101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Aug 20 06:32:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 06:32:36 2012] rmf not generated due to insufficient counts
[Mon Aug 20 07:53:08 2012] Updating aperture counts using extracted products
[Mon Aug 20 07:53:08 2012] Error reading totcts from fullrun_mos1_xmm0550960101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Aug 20 07:53:09 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 07:53:09 2012] Using photon index=1.80, rate=0.0043, arf fullrun_mos1_xmm0550960101_pi300-10000_pass1_cl_src16.arf
[Mon Aug 20 07:53:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 07:53:09 2012] Updating source flux to 5.2e-14
[Mon Aug 20 07:53:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting