[Wed Sep 28 22:57:32 2011] Detection parameters:
  Position = (450.2, 231.3) = 1 10 40.07 -38 10 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1158.2 +/- 46.5
  Background counts = 208.0
  Rate = 0.01 +/- 0.0004

[Wed Sep 28 22:57:33 2011] Off-axis axis estimate = 12.03'
[Wed Sep 28 23:05:48 2011] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 23:05:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 23:05:48 2011] Initial guess for spatial extent in simple fitting = 12.44"
[Wed Sep 28 23:05:48 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.085
[Wed Sep 28 23:05:48 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 12.44"
[Thu Sep 29 00:10:17 2011] fullrun_pn_xmm0550950101_pi300-10000_cl_pass0_src4.ximg exists
[Thu Sep 29 00:10:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550950101_pi300-10000_cl_pass0_src4.csv
[Thu Sep 29 00:10:17 2011] fullrun_pn_xmm0550950101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Sep 29 00:10:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550950101_pi300-10000_cl_pass0_src4.csv
[Thu Sep 29 00:10:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550950101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550950101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 00:10:18 2011] fullrun_pn_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Sep 29 00:10:18 2011] fullrun_pn_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Sep 29 00:10:18 2011] Fit fullrun_pn_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Sep 29 01:33:13 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.146535 pixels away
[Thu Sep 29 01:33:13 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 01:33:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 01:33:13 2011] Assessing source extent using major
[Thu Sep 29 01:33:13 2011] Source does appear to be extended
[Thu Sep 29 01:33:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 01:33:32 2011] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 01:33:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 01:33:32 2011] Initial guess for spatial extent in simple fitting = 12.44"
[Thu Sep 29 01:33:32 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.085
[Thu Sep 29 01:33:32 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 12.44"
[Thu Sep 29 02:33:57 2011] fullrun_pn_xmm0550950101_pi300-10000_cl_pass1_src4.ximg exists
[Thu Sep 29 02:33:57 2011] fullrun_pn_xmm0550950101_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Sep 29 02:33:57 2011] Fit fullrun_pn_xmm0550950101_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Sep 29 02:33:58 2011] fullrun_pn_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Sep 29 02:33:58 2011] fullrun_pn_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Sep 29 02:33:58 2011] Fit fullrun_pn_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Sep 29 04:01:02 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.141218 pixels away
[Thu Sep 29 04:01:02 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 04:01:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 04:01:02 2011] Assessing source extent using major
[Thu Sep 29 04:01:02 2011] Source does appear to be extended
[Thu Sep 29 04:01:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 04:01:24 2011] Counts = 1158.187622, rescaling region sizes by 2.000000
[Thu Sep 29 04:01:24 2011] XMMSAS src. selection expression = ellipse(39116.405334, 20073.108139, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Sep 29 04:01:24 2011] Writing source region out to fullrun_pn_xmm0550950101_pi300-10000_pass1_cl_src4_src.reg
[Thu Sep 29 04:01:24 2011] Extracting stamp from image fullrun_pn_xmm0550950101_pi300-10000_cl_sm2.00.img.gz, (375, 156) - (525, 306)
[Thu Sep 29 04:01:24 2011] XMMSAS bgd. selection expression = annulus(39116.405334, 20073.108139, 4350.000000, 8700.000000, X, Y) && !ellipse(33106.045593, 15764.784134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35875.055298, 20027.680588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33430.997284, 14814.015488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30903.019104, 29290.314484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42950.782715, 23944.075806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32913.152405, 23331.050781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29772.133270, 18814.190155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35177.560516, 16851.856674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37921.249207, 29091.381104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36896.584600, 28949.594600, 404.782412, 404.782412, 0.000000, X, Y) && !ellipse(32441.842000, 15270.494000, 1033.736030, 1033.736030, 0.000000, X, Y) && !ellipse(33010.668976, 27648.624908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35201.315063, 27280.821045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33049.248600, 24150.842000, 491.920814, 491.920814, 0.000000, X, Y) && !ellipse(31652.074554, 24058.515533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41155.824000, 21699.193800, 1357.152039, 619.132018, 306.545000, X, Y) && !ellipse(33449.869232, 19345.165482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35267.082020, 19151.921600, 325.605609, 325.605609, 40.202000, X, Y) && !ellipse(33179.082020, 17933.921600, 325.605609, 325.605609, 0.000000, X, Y)
[Thu Sep 29 04:01:24 2011] Writing fullrun_pn_xmm0550950101_pi300-10000_pass1_cl_src4.gif
[Thu Sep 29 04:13:13 2011] Mean detx,y = (12839.92, -2048.06) 
[Thu Sep 29 04:13:26 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 04:15:09 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 04:15:09 2011] Setting source spectrum file to fullrun_pn_xmm0550950101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Sep 29 04:15:09 2011] Setting bgd. spectrum file to fullrun_pn_xmm0550950101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Sep 29 05:55:59 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep 29 05:55:59 2011] rmf not generated due to insufficient counts
[Thu Sep 29 07:50:43 2011] Updating aperture counts using extracted products
[Thu Sep 29 07:50:43 2011] Error reading totcts from fullrun_pn_xmm0550950101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Sep 29 07:50:44 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 07:50:44 2011] Using photon index=1.80, rate=0.00964, arf fullrun_pn_xmm0550950101_pi300-10000_pass1_cl_src4.arf
[Thu Sep 29 07:50:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 07:50:44 2011] Updating source flux to 4.8e-14
[Thu Sep 29 07:52:55 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting