[Wed Sep 28 22:58:26 2011] Detection parameters:
  Position = (365.1, 396.1) = 1 11 11.53 -37 58 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 373.8 +/- 27.1
  Background counts = 89.6
  Rate = 0.005 +/- 0.0004

[Wed Sep 28 22:58:27 2011] Off-axis axis estimate = 8.57'
[Thu Sep 29 00:48:09 2011] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 00:48:09 2011] Initial guess for spatial extent in simple fitting = 10.71"
[Thu Sep 29 00:48:09 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Thu Sep 29 00:48:09 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 10.71"
[Thu Sep 29 01:33:05 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Sep 29 01:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src7.csv
[Thu Sep 29 01:33:05 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Sep 29 01:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src7.csv
[Thu Sep 29 01:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 01:33:05 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Sep 29 01:33:05 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Sep 29 01:33:05 2011] Fit fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Sep 29 01:33:22 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.433292 pixels away
[Thu Sep 29 01:33:22 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 01:33:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 01:33:22 2011] Assessing source extent using major
[Thu Sep 29 01:33:22 2011] Source does appear to be extended
[Thu Sep 29 01:33:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 03:15:24 2011] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 03:15:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 03:15:24 2011] Initial guess for spatial extent in simple fitting = 10.71"
[Thu Sep 29 03:15:24 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Thu Sep 29 03:15:24 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 10.71"
[Thu Sep 29 04:00:53 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_src6.ximg exists
[Thu Sep 29 04:00:53 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Sep 29 04:00:53 2011] Fit fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_src6 appears to have run properly
[Thu Sep 29 04:00:53 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Sep 29 04:00:53 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Sep 29 04:00:53 2011] Fit fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Sep 29 04:01:12 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.227665 pixels away
[Thu Sep 29 04:01:12 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 04:01:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 04:01:12 2011] Assessing source extent using major
[Thu Sep 29 04:01:12 2011] Source does appear to be extended
[Thu Sep 29 04:01:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 07:10:21 2011] XMMSAS src. selection expression = ellipse(31712.104767, 34408.719788, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep 29 07:10:21 2011] Writing source region out to fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src5_src.reg
[Thu Sep 29 07:10:21 2011] Extracting stamp from image fullrun_mos2_xmm0550950101_pi300-10000_cl_sm2.00.img.gz, (328, 359) - (403, 434)
[Thu Sep 29 07:10:21 2011] XMMSAS bgd. selection expression = annulus(31712.104767, 34408.719788, 1087.500000, 2175.000000, X, Y)
[Thu Sep 29 07:10:21 2011] Writing fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src5.gif
[Thu Sep 29 07:14:14 2011] Mean detx,y = (1911.81, 8610.42) 
[Thu Sep 29 07:14:15 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 07:14:32 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 07:14:32 2011] Setting source spectrum file to fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Sep 29 07:14:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Sep 29 07:32:04 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep 29 07:32:04 2011] rmf not generated due to insufficient counts
[Thu Sep 29 07:50:45 2011] Updating aperture counts using extracted products
[Thu Sep 29 07:50:45 2011] Error reading totcts from fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Sep 29 07:50:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 07:50:46 2011] Using photon index=1.80, rate=0.00533, arf fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src5.arf
[Thu Sep 29 07:50:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 07:50:46 2011] Updating source flux to 9.5e-14
[Thu Sep 29 07:51:49 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting