[Wed Sep 28 22:58:27 2011] Detection parameters:
  Position = (298.6, 218.7) = 1 11 35.97 -38 11 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 334.2 +/- 23.9
  Background counts = 101.9
  Rate = 0.004 +/- 0.0003

[Wed Sep 28 22:58:27 2011] Off-axis axis estimate = 5.78'
[Thu Sep 29 00:48:09 2011] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 00:48:09 2011] Initial guess for spatial extent in simple fitting = 9.32"
[Thu Sep 29 00:48:09 2011] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.860
[Thu Sep 29 00:48:09 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 9.32"
[Thu Sep 29 01:33:05 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src9.ximg exists
[Thu Sep 29 01:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src9.csv
[Thu Sep 29 01:33:05 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Sep 29 01:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src9.csv
[Thu Sep 29 01:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 01:33:05 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Sep 29 01:33:05 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Sep 29 01:33:05 2011] Fit fullrun_mos2_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Sep 29 01:33:22 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 10.468936 pixels away
[Thu Sep 29 01:33:22 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 01:33:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 01:33:22 2011] Assessing source extent using major
[Thu Sep 29 01:33:22 2011] Source does appear to be extended
[Thu Sep 29 01:33:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 03:15:24 2011] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 03:15:24 2011] Initial guess for spatial extent in simple fitting = 9.32"
[Thu Sep 29 03:15:24 2011] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.860
[Thu Sep 29 03:15:24 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 9.32"
[Thu Sep 29 04:00:53 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_src8.ximg exists
[Thu Sep 29 04:00:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_src8.csv
[Thu Sep 29 04:00:53 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Sep 29 04:00:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_src8.csv
[Thu Sep 29 04:00:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 04:00:54 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Sep 29 04:00:54 2011] fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Sep 29 04:00:54 2011] Fit fullrun_mos2_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Sep 29 04:01:12 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.528663 pixels away
[Thu Sep 29 04:01:12 2011] Spatial fit model total counts = 887.878000, observed total counts = 925.000000
[Thu Sep 29 04:01:12 2011] Offset between fit and detection position for source 30 = 0.486060 pixels
[Thu Sep 29 04:01:12 2011] 806.646000 total counts/ 497.053000 bgd. counts: snr = 13.886404
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.486060 pixels
  Position = (298.3, 219.1) = 1 11 36.09 -38 11 18.0
  Extent = 7.1 (6.4-8.1)", rotation angle = 0
  Source counts = 309.6 +/- 28.4
  Background counts = 497.1
  Rate = 0.003 +/- 0.0002
[Thu Sep 29 04:01:12 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 04:01:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 04:01:12 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 04:01:12 2011] Source does appear to be extended
[Thu Sep 29 04:01:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 07:10:21 2011] XMMSAS src. selection expression = ellipse(25903.306200, 19014.478000, 424.871878, 424.871878, 0.000000, X, Y)
[Thu Sep 29 07:10:21 2011] Writing source region out to fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src30_src.reg
[Thu Sep 29 07:10:21 2011] Extracting stamp from image fullrun_mos2_xmm0550950101_pi300-10000_cl_sm2.00.img.gz, (274, 195) - (323, 244)
[Thu Sep 29 07:10:21 2011] XMMSAS bgd. selection expression = annulus(25903.306200, 19014.478000, 708.119797, 1416.239594, X, Y) && !ellipse(25086.548187, 17118.268951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28024.416000, 16970.685000, 1637.088047, 1147.360033, 52.460949, X, Y)
[Thu Sep 29 07:10:21 2011] Writing fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src30.gif
[Thu Sep 29 07:15:37 2011] Mean detx,y = (-3072.98, -7098.70) 
[Thu Sep 29 07:15:38 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 07:15:44 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 07:15:44 2011] Setting source spectrum file to fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Sep 29 07:15:44 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu Sep 29 07:50:45 2011] Updating aperture counts using extracted products
[Thu Sep 29 07:50:45 2011] Error reading totcts from fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Sep 29 07:50:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 07:50:46 2011] Using photon index=1.80, rate=0.00272, arf fullrun_mos2_xmm0550950101_pi300-10000_pass1_cl_src30.arf
[Thu Sep 29 07:50:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 07:50:46 2011] Updating source flux to 4.3e-14