[Wed Sep 28 22:57:56 2011] Detection parameters:
  Position = (155.9, 338.7) = 1 12 28.54 -38 2 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 234.9 +/- 22.6
  Background counts = 78.6
  Rate = 0.002 +/- 0.0002

[Wed Sep 28 22:57:56 2011] Off-axis axis estimate = 10.74'
[Thu Sep 29 00:10:18 2011] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 00:10:18 2011] Initial guess for spatial extent in simple fitting = 11.80"
[Thu Sep 29 00:10:18 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.018
[Thu Sep 29 00:10:18 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 11.80"
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src13.ximg exists
[Thu Sep 29 00:48:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src13.csv
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Sep 29 00:48:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src13.csv
[Thu Sep 29 00:48:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Sep 29 00:48:08 2011] Fit fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Sep 29 01:33:18 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.765370 pixels away
[Thu Sep 29 01:33:18 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 01:33:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 01:33:18 2011] Assessing source extent using major
[Thu Sep 29 01:33:18 2011] Source does appear to be extended
[Thu Sep 29 01:33:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 02:33:59 2011] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 02:33:59 2011] Initial guess for spatial extent in simple fitting = 11.80"
[Thu Sep 29 02:33:59 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.018
[Thu Sep 29 02:33:59 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 11.80"
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src13.ximg exists
[Thu Sep 29 03:15:24 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src13.csv
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Sep 29 03:15:24 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src13.csv
[Thu Sep 29 03:15:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Sep 29 03:15:24 2011] Fit fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Sep 29 04:01:06 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.178056 pixels away
[Thu Sep 29 04:01:06 2011] Warning, spatial fit 13 centroid is now closest to src. 2
[Thu Sep 29 04:01:06 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 04:01:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 04:01:06 2011] Assessing source extent using major
[Thu Sep 29 04:01:06 2011] Source does appear to be extended
[Thu Sep 29 04:01:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 06:35:54 2011] XMMSAS src. selection expression = ellipse(13512.502869, 29419.184296, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep 29 06:35:54 2011] Writing source region out to fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src6_src.reg
[Thu Sep 29 06:35:54 2011] Extracting stamp from image fullrun_mos1_xmm0550950101_pi300-10000_cl_sm2.00.img.gz, (118, 301) - (193, 376)
[Thu Sep 29 06:35:54 2011] XMMSAS bgd. selection expression = annulus(13512.502869, 29419.184296, 1087.500000, 2175.000000, X, Y) && !ellipse(12825.571121, 29718.039703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15814.474000, 28672.910600, 361.934410, 361.934410, 0.000000, X, Y) && !ellipse(10954.920000, 28087.565800, 505.218415, 505.218415, 0.000000, X, Y)
[Thu Sep 29 06:35:54 2011] Writing fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src6.gif
[Thu Sep 29 06:41:10 2011] Mean detx,y = (-6314.82, -13343.80) 
[Thu Sep 29 06:41:11 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 06:41:21 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 06:41:21 2011] Setting source spectrum file to fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Sep 29 06:41:21 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Sep 29 07:06:08 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep 29 07:06:08 2011] rmf not generated due to insufficient counts
[Thu Sep 29 07:50:45 2011] Updating aperture counts using extracted products
[Thu Sep 29 07:50:45 2011] Error reading totcts from fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Sep 29 07:50:45 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 07:50:45 2011] Using photon index=1.80, rate=0.00199, arf fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src6.arf
[Thu Sep 29 07:50:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 07:50:45 2011] Updating source flux to 5.6e-14
[Thu Sep 29 07:50:48 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting