[Wed Sep 28 22:57:56 2011] Detection parameters:
  Position = (146.9, 249.3) = 1 12 31.92 -38 9 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.1 +/- 16.1
  Background counts = 66.5
  Rate = 0.0009 +/- 0.0001

[Wed Sep 28 22:57:56 2011] Off-axis axis estimate = 11.55'
[Thu Sep 29 00:10:18 2011] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 00:10:18 2011] Initial guess for spatial extent in simple fitting = 12.20"
[Thu Sep 29 00:10:18 2011] source mask rpix=2.8, npix_max = 43, mask sum = 33, frac = 0.755
[Thu Sep 29 00:10:18 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 12.20"
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src26.ximg exists
[Thu Sep 29 00:48:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src26.csv
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Sep 29 00:48:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src26.csv
[Thu Sep 29 00:48:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Sep 29 00:48:08 2011] Fit fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Thu Sep 29 01:33:18 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 15.741083 pixels away
[Thu Sep 29 01:33:18 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 01:33:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 01:33:18 2011] Assessing source extent using major
[Thu Sep 29 01:33:18 2011] Source does appear to be extended
[Thu Sep 29 01:33:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 02:33:59 2011] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 02:33:59 2011] Initial guess for spatial extent in simple fitting = 12.20"
[Thu Sep 29 02:33:59 2011] source mask rpix=2.8, npix_max = 43, mask sum = 33, frac = 0.755
[Thu Sep 29 02:33:59 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 12.20"
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src26.ximg exists
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu Sep 29 03:15:24 2011] Fit fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src26 appears to have run properly
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Sep 29 03:15:24 2011] Fit fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Thu Sep 29 04:01:06 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 16.009908 pixels away
[Thu Sep 29 04:01:06 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 04:01:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 04:01:06 2011] Assessing source extent using major
[Thu Sep 29 04:01:06 2011] Source does appear to be extended
[Thu Sep 29 04:01:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 06:35:54 2011] XMMSAS src. selection expression = ellipse(12731.240585, 21640.302902, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep 29 06:35:54 2011] Writing source region out to fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src22_src.reg
[Thu Sep 29 06:35:54 2011] Extracting stamp from image fullrun_mos1_xmm0550950101_pi300-10000_cl_sm2.00.img.gz, (109, 212) - (184, 287)
[Thu Sep 29 06:35:54 2011] XMMSAS bgd. selection expression = annulus(12731.240585, 21640.302902, 1087.500000, 2175.000000, X, Y)
[Thu Sep 29 06:35:54 2011] Writing fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src22.gif
[Thu Sep 29 06:45:43 2011] Mean detx,y = (-12753.33, -9136.79) 
[Thu Sep 29 06:45:44 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 06:45:58 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 06:45:58 2011] Setting source spectrum file to fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Sep 29 06:45:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu Sep 29 07:10:00 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep 29 07:10:00 2011] rmf not generated due to insufficient counts
[Thu Sep 29 07:50:45 2011] Updating aperture counts using extracted products
[Thu Sep 29 07:50:45 2011] Error reading totcts from fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Sep 29 07:50:45 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 07:50:45 2011] Using photon index=1.80, rate=0.000926, arf fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src22.arf
[Thu Sep 29 07:50:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 07:50:45 2011] Updating source flux to 3.3e-14
[Thu Sep 29 07:50:48 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting