[Wed Sep 28 22:57:56 2011] Detection parameters:
  Position = (302.0, 412.5) = 1 11 34.73 -37 57 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.2 +/- 16.1
  Background counts = 95.6
  Rate = 0.001 +/- 0.0001

[Wed Sep 28 22:57:56 2011] Off-axis axis estimate = 8.27'
[Thu Sep 29 00:10:18 2011] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 00:10:18 2011] Initial guess for spatial extent in simple fitting = 10.57"
[Thu Sep 29 00:10:18 2011] source mask rpix=2.4, npix_max = 34, mask sum = 24, frac = 0.699
[Thu Sep 29 00:10:18 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 10.57"
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src23.ximg exists
[Thu Sep 29 00:48:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src23.csv
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Sep 29 00:48:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src23.csv
[Thu Sep 29 00:48:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Sep 29 00:48:08 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Sep 29 00:48:08 2011] Fit fullrun_mos1_xmm0550950101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Sep 29 01:33:18 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.266026 pixels away
[Thu Sep 29 01:33:18 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 01:33:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 01:33:18 2011] Assessing source extent using major
[Thu Sep 29 01:33:18 2011] Source does appear to be extended
[Thu Sep 29 01:33:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 02:33:59 2011] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 02:33:59 2011] Initial guess for spatial extent in simple fitting = 10.57"
[Thu Sep 29 02:33:59 2011] source mask rpix=2.4, npix_max = 34, mask sum = 24, frac = 0.699
[Thu Sep 29 02:33:59 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 10.57"
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src23.ximg exists
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Sep 29 03:15:24 2011] Fit fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_src23 appears to have run properly
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Sep 29 03:15:24 2011] fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Sep 29 03:15:24 2011] Fit fullrun_mos1_xmm0550950101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Sep 29 04:01:06 2011] Source 15 is offset by -9.720322 and 1.158218 pixels which is larger than
2 X fitted extent = 3.453117 x 3.453117, not incorporating fit results
[Thu Sep 29 04:01:06 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 04:01:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 04:01:06 2011] Assessing source extent using major
[Thu Sep 29 04:01:06 2011] Source does appear to be extended
[Thu Sep 29 04:01:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 06:35:54 2011] XMMSAS src. selection expression = ellipse(26225.053955, 35838.747772, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep 29 06:35:54 2011] Writing source region out to fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src15_src.reg
[Thu Sep 29 06:35:54 2011] Extracting stamp from image fullrun_mos1_xmm0550950101_pi300-10000_cl_sm2.00.img.gz, (264, 375) - (339, 450)
[Thu Sep 29 06:35:54 2011] XMMSAS bgd. selection expression = annulus(26225.053955, 35838.747772, 1087.500000, 2175.000000, X, Y)
[Thu Sep 29 06:35:54 2011] Writing fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src15.gif
[Thu Sep 29 06:44:42 2011] Mean detx,y = (6612.43, -7361.11) 
[Thu Sep 29 06:44:42 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 06:45:03 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 06:45:03 2011] Setting source spectrum file to fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Sep 29 06:45:03 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Sep 29 07:09:46 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep 29 07:09:46 2011] rmf not generated due to insufficient counts
[Thu Sep 29 07:50:45 2011] Updating aperture counts using extracted products
[Thu Sep 29 07:50:45 2011] Error reading totcts from fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Sep 29 07:50:45 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 07:50:45 2011] Using photon index=1.80, rate=0.00101, arf fullrun_mos1_xmm0550950101_pi300-10000_pass1_cl_src15.arf
[Thu Sep 29 07:50:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 07:50:45 2011] Updating source flux to 2.2e-14
[Thu Sep 29 07:50:48 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting