[Mon Jul 16 02:43:16 2012] Detection parameters:
  Position = (205.2, 308.1) = 3 42 18.75 -35 23 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.1 +/- 12.0
  Background counts = 8.6
  Rate = 0.008 +/- 0.001

[Mon Jul 16 02:43:16 2012] Off-axis axis estimate = 6.80'
[Mon Jul 16 03:30:53 2012] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 03:30:53 2012] Initial guess for spatial extent in simple fitting = 9.83"
[Mon Jul 16 03:30:53 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.182
[Mon Jul 16 03:30:53 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.83"
[Mon Jul 16 03:56:22 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jul 16 03:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src5.csv
[Mon Jul 16 03:56:22 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jul 16 03:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src5.csv
[Mon Jul 16 03:56:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 03:56:22 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jul 16 03:56:22 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jul 16 03:56:22 2012] Fit fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jul 16 04:24:01 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.262936 pixels away
[Mon Jul 16 04:24:01 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 04:24:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 04:24:01 2012] Assessing source extent using major
[Mon Jul 16 04:24:01 2012] Source does appear to be extended
[Mon Jul 16 04:24:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 05:04:57 2012] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 05:04:57 2012] Initial guess for spatial extent in simple fitting = 9.83"
[Mon Jul 16 05:04:57 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.182
[Mon Jul 16 05:04:57 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.83"
[Mon Jul 16 05:30:57 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jul 16 05:30:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930501_pi300-10000_cl_pass1_src5.csv
[Mon Jul 16 05:30:57 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jul 16 05:30:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930501_pi300-10000_cl_pass1_src5.csv
[Mon Jul 16 05:30:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550930501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550930501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 05:30:57 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jul 16 05:30:57 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jul 16 05:30:57 2012] Fit fullrun_mos1_xmm0550930501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jul 16 05:58:50 2012] Spatial fit model total counts = 210.644000, observed total counts = 210.000000
[Mon Jul 16 05:58:50 2012] Offset between fit and detection position for source 7 = 0.604157 pixels
[Mon Jul 16 05:58:50 2012] 210.102300 total counts/ 129.173000 bgd. counts: snr = 7.120654
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.604157 pixels
  Position = (204.7, 308.5) = 3 42 18.90 -35 23 31.8
  Extent = 9.6 (7.2-14.3)", rotation angle = 0
  Source counts = 80.9 +/- 14.5
  Background counts = 129.2
  Rate = 0.004 +/- 0.0008
[Mon Jul 16 05:58:50 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 05:58:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 05:58:50 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 05:58:50 2012] Source does appear to be extended
[Mon Jul 16 05:58:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 06:28:06 2012] XMMSAS src. selection expression = ellipse(17763.790400, 26790.601200, 575.783417, 575.783417, 0.000000, X, Y)
[Mon Jul 16 06:28:06 2012] Writing source region out to fullrun_mos1_xmm0550930501_pi300-10000_pass1_cl_src7_src.reg
[Mon Jul 16 06:28:06 2012] Extracting stamp from image fullrun_mos1_xmm0550930501_pi300-10000_cl_sm2.00.img.gz, (172, 275) - (238, 342)
[Mon Jul 16 06:28:06 2012] XMMSAS bgd. selection expression = annulus(17763.790400, 26790.601200, 959.639028, 1919.278055, X, Y) && !ellipse(19439.665455, 28458.072400, 537.454415, 537.454415, 0.000000, X, Y) && !ellipse(17827.164429, 27848.567200, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 06:28:06 2012] Writing fullrun_mos1_xmm0550930501_pi300-10000_pass1_cl_src7.gif
[Mon Jul 16 06:29:32 2012] Mean detx,y = (-644.28, -9550.42) 
[Mon Jul 16 06:29:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 06:29:49 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 06:29:49 2012] Setting source spectrum file to fullrun_mos1_xmm0550930501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jul 16 06:29:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550930501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jul 16 06:39:41 2012] Not generating rmf since there are only 80 counts
[Mon Jul 16 06:39:41 2012] rmf not generated due to insufficient counts
[Mon Jul 16 07:00:16 2012] Updating aperture counts using extracted products
[Mon Jul 16 07:00:16 2012] Error reading totcts from fullrun_mos1_xmm0550930501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jul 16 07:00:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 07:00:16 2012] Using photon index=1.80, rate=0.00436, arf fullrun_mos1_xmm0550930501_pi300-10000_pass1_cl_src7.arf
[Mon Jul 16 07:00:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 07:00:16 2012] Updating source flux to 8e-14
[Mon Jul 16 07:00:18 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting