[Mon Jul 16 02:43:16 2012] Detection parameters:
  Position = (256.9, 330.3) = 3 42 0.35 -35 21 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.6 +/- 9.2
  Background counts = 10.2
  Rate = 0.003 +/- 0.0006

[Mon Jul 16 02:43:16 2012] Off-axis axis estimate = 3.80'
[Mon Jul 16 03:30:53 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 03:30:53 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Mon Jul 16 03:30:53 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.072
[Mon Jul 16 03:30:53 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.33"
[Mon Jul 16 03:56:22 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jul 16 03:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src17.csv
[Mon Jul 16 03:56:22 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jul 16 03:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src17.csv
[Mon Jul 16 03:56:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 03:56:22 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jul 16 03:56:22 2012] fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jul 16 03:56:22 2012] Fit fullrun_mos1_xmm0550930501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Jul 16 04:24:01 2012] Source 15 is offset by -8.873234 and 0.996097 pixels which is larger than
2 X fitted extent = 0.967108 x 0.967108, not incorporating fit results
[Mon Jul 16 04:24:01 2012] Spatial fit model total counts = 195.973000, observed total counts = 196.000000
[Mon Jul 16 04:24:01 2012] Offset between fit and detection position for source 15 = 0.517980 pixels
[Mon Jul 16 04:24:01 2012] 203.640200 total counts/ 185.046000 bgd. counts: snr = 1.366903
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.517980 pixels
  Position = (256.8, 329.7) = 3 42 0.38 -35 21 59.6
  Extent = 3.7 (2.1-6.3)", rotation angle = 0
  Source counts = 18.6 +/- 14.3
  Background counts = 185.0
  Rate = 0.001 +/- 0.0008
  Deleting source due to low Poisson probability