[Fri Mar 16 00:41:43 2012] Detection parameters:
  Position = (264.3, 206.7) = 3 40 31.44 -35 5 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.7 +/- 10.4
  Background counts = 12.6
  Rate = 0.008 +/- 0.001

[Fri Mar 16 00:41:43 2012] Off-axis axis estimate = 7.10'
[Fri Mar 16 01:09:21 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 01:09:21 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Fri Mar 16 01:09:21 2012] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.641
[Fri Mar 16 01:09:21 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.98"
[Fri Mar 16 01:26:34 2012] fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_src3.ximg exists
[Fri Mar 16 01:26:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_src3.csv
[Fri Mar 16 01:26:34 2012] fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Mar 16 01:26:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_src3.csv
[Fri Mar 16 01:26:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 01:26:34 2012] fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Mar 16 01:26:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Mar 16 01:26:34 2012] fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Mar 16 01:26:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Mar 16 01:26:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550930301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 01:56:18 2012] Source 10 is offset by 4.512247 and -6.770728 pixels which is larger than
2 X fitted extent = 1.864212 x 1.864212, not incorporating fit results
[Fri Mar 16 01:56:18 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 01:56:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 01:56:18 2012] Assessing source extent using major
[Fri Mar 16 01:56:18 2012] Source does appear to be extended
[Fri Mar 16 01:56:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 02:22:06 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 02:22:06 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Fri Mar 16 02:22:06 2012] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.641
[Fri Mar 16 02:22:06 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.98"
[Fri Mar 16 02:38:08 2012] fullrun_mos1_xmm0550930301_pi300-10000_cl_pass1_src3.ximg exists
[Fri Mar 16 02:38:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930301_pi300-10000_cl_pass1_src3.csv
[Fri Mar 16 02:38:08 2012] fullrun_mos1_xmm0550930301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Mar 16 02:38:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930301_pi300-10000_cl_pass1_src3.csv
[Fri Mar 16 02:38:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550930301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550930301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 02:38:08 2012] fullrun_mos1_xmm0550930301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Mar 16 02:38:08 2012] fullrun_mos1_xmm0550930301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Mar 16 02:38:08 2012] Fit fullrun_mos1_xmm0550930301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Mar 16 02:58:56 2012] Spatial fit model total counts = 191.658000, observed total counts = 178.000000
[Fri Mar 16 02:58:56 2012] Offset between fit and detection position for source 10 = 1.325059 pixels
[Fri Mar 16 02:58:56 2012] 192.131500 total counts/ 151.741000 bgd. counts: snr = 3.278897
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.325059 pixels
  Position = (264.1, 208.0) = 3 40 31.52 -35 5 9.4
  Extent = 4.1 (2.6-6.2)", rotation angle = 0
  Source counts = 40.4 +/- 13.9
  Background counts = 151.7
  Rate = 0.002 +/- 0.0008
[Fri Mar 16 02:58:56 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 02:58:56 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 02:58:56 2012] Source does appear to be extended
[Fri Mar 16 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 03:18:42 2012] XMMSAS src. selection expression = ellipse(22924.538400, 18046.268800, 243.626407, 243.626407, 0.000000, X, Y)
[Fri Mar 16 03:18:42 2012] Writing source region out to fullrun_mos1_xmm0550930301_pi300-10000_pass1_cl_src10_src.reg
[Fri Mar 16 03:18:42 2012] Extracting stamp from image fullrun_mos1_xmm0550930301_pi300-10000_cl_sm2.00.img.gz, (250, 194) - (278, 222)
[Fri Mar 16 03:18:42 2012] XMMSAS bgd. selection expression = annulus(22924.538400, 18046.268800, 406.044012, 812.088023, X, Y)
[Fri Mar 16 03:18:42 2012] Writing fullrun_mos1_xmm0550930301_pi300-10000_pass1_cl_src10.gif
[Fri Mar 16 03:19:16 2012] Mean detx,y = (6843.09, -3169.30) 
[Fri Mar 16 03:19:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 03:19:25 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 03:19:26 2012] Setting source spectrum file to fullrun_mos1_xmm0550930301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 16 03:19:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550930301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Mar 16 03:25:21 2012] Not generating rmf since there are only 40 counts
[Fri Mar 16 03:25:21 2012] rmf not generated due to insufficient counts
[Fri Mar 16 03:42:26 2012] Updating aperture counts using extracted products
[Fri Mar 16 03:42:26 2012] Error reading totcts from fullrun_mos1_xmm0550930301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 16 03:42:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 03:42:26 2012] Using photon index=1.80, rate=0.00243, arf fullrun_mos1_xmm0550930301_pi300-10000_pass1_cl_src10.arf
[Fri Mar 16 03:42:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 03:42:26 2012] Updating source flux to 7.2e-14
[Fri Mar 16 03:42:27 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Fri Mar 16 03:42:27 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting