[Thu Nov 24 21:51:11 2011] Detection parameters:
  Position = (277.6, 456.0) = 3 39 25.27 -34 37 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.6 +/- 15.5
  Background counts = 19.2
  Rate = 0.008 +/- 0.0009

[Thu Nov 24 21:51:11 2011] Off-axis axis estimate = 11.52'
[Thu Nov 24 22:07:36 2011] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 22:07:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 22:07:36 2011] Initial guess for spatial extent in simple fitting = 12.19"
[Thu Nov 24 22:07:36 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.963
[Thu Nov 24 22:07:36 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.19"
[Thu Nov 24 22:18:54 2011] fullrun_mos1_xmm0550930201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Nov 24 22:18:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930201_pi300-10000_cl_pass0_src3.csv
[Thu Nov 24 22:18:54 2011] fullrun_mos1_xmm0550930201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Nov 24 22:18:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930201_pi300-10000_cl_pass0_src3.csv
[Thu Nov 24 22:18:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550930201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550930201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 22:18:54 2011] fullrun_mos1_xmm0550930201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Nov 24 22:18:54 2011] fullrun_mos1_xmm0550930201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Nov 24 22:18:54 2011] Fit fullrun_mos1_xmm0550930201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Nov 24 22:29:07 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.675526 pixels away
[Thu Nov 24 22:29:07 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 22:29:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 22:29:07 2011] Assessing source extent using major
[Thu Nov 24 22:29:07 2011] Source does appear to be extended
[Thu Nov 24 22:29:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 22:51:45 2011] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 22:51:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 22:51:45 2011] Initial guess for spatial extent in simple fitting = 12.19"
[Thu Nov 24 22:51:45 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.963
[Thu Nov 24 22:51:45 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 12.19"
[Thu Nov 24 23:04:57 2011] fullrun_mos1_xmm0550930201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Nov 24 23:04:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930201_pi300-10000_cl_pass1_src3.csv
[Thu Nov 24 23:04:57 2011] fullrun_mos1_xmm0550930201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Nov 24 23:04:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930201_pi300-10000_cl_pass1_src3.csv
[Thu Nov 24 23:04:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550930201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550930201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 23:04:58 2011] fullrun_mos1_xmm0550930201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Nov 24 23:04:58 2011] fullrun_mos1_xmm0550930201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Nov 24 23:04:58 2011] Fit fullrun_mos1_xmm0550930201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Nov 24 23:14:26 2011] Spatial fit model total counts = 276.000000, observed total counts = 276.000000
[Thu Nov 24 23:14:26 2011] Offset between fit and detection position for source 8 = 0.310422 pixels
[Thu Nov 24 23:14:26 2011] 277.181300 total counts/ 182.777000 bgd. counts: snr = 6.982823
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.310422 pixels
  Position = (277.3, 456.0) = 3 39 25.38 -34 37 58.2
  Extent = 5.6 (4.5-6.7)", rotation angle = 0
  Source counts = 94.4 +/- 16.6
  Background counts = 182.8
  Rate = 0.006 +/- 0.001
[Thu Nov 24 23:14:26 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 23:14:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 23:14:26 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 23:14:26 2011] Source does appear to be extended
[Thu Nov 24 23:14:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 23:27:18 2011] XMMSAS src. selection expression = ellipse(24079.432720, 39622.476800, 334.746610, 334.746610, 0.000000, X, Y)
[Thu Nov 24 23:27:18 2011] Writing source region out to fullrun_mos1_xmm0550930201_pi300-10000_pass1_cl_src8_src.reg
[Thu Nov 24 23:27:18 2011] Extracting stamp from image fullrun_mos1_xmm0550930201_pi300-10000_cl_sm2.00.img.gz, (258, 437) - (297, 475)
[Thu Nov 24 23:27:18 2011] XMMSAS bgd. selection expression = annulus(24079.432720, 39622.476800, 557.911016, 1115.822032, X, Y)
[Thu Nov 24 23:27:18 2011] Writing fullrun_mos1_xmm0550930201_pi300-10000_pass1_cl_src8.gif
[Thu Nov 24 23:27:56 2011] Mean detx,y = (-9005.32, 10186.40) 
[Thu Nov 24 23:27:58 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 23:28:10 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 23:28:10 2011] Setting source spectrum file to fullrun_mos1_xmm0550930201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Nov 24 23:28:10 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0550930201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Nov 24 23:30:18 2011] Not generating rmf since there are only 94 counts
[Thu Nov 24 23:30:18 2011] rmf not generated due to insufficient counts
[Thu Nov 24 23:33:52 2011] Updating aperture counts using extracted products
[Thu Nov 24 23:33:53 2011] Error reading totcts from fullrun_mos1_xmm0550930201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Nov 24 23:33:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 23:33:53 2011] Using photon index=1.80, rate=0.00589, arf fullrun_mos1_xmm0550930201_pi300-10000_pass1_cl_src8.arf
[Thu Nov 24 23:33:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 23:33:53 2011] Updating source flux to 1.4e-13
[Thu Nov 24 23:33:55 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Nov 24 23:33:56 2011] xmm0550930201/analysis//spectral/fullrun_mos1_xmm0550930201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete