[Fri May  4 10:52:31 2012] Detection parameters:
  Position = (355.3, 255.2) = 3 38 33.96 -35 4 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.3 +/- 8.9
  Background counts = 9.3
  Rate = 0.004 +/- 0.001

[Fri May  4 10:52:31 2012] Off-axis axis estimate = 5.18'
[Fri May  4 12:04:34 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Fri May  4 12:04:34 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Fri May  4 12:04:34 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.944
[Fri May  4 12:04:34 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.02"
[Fri May  4 12:34:23 2012] fullrun_mos2_xmm0550930101_pi300-10000_cl_pass0_src4.ximg exists
[Fri May  4 12:34:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550930101_pi300-10000_cl_pass0_src4.csv
[Fri May  4 12:34:23 2012] fullrun_mos2_xmm0550930101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri May  4 12:34:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550930101_pi300-10000_cl_pass0_src4.csv
[Fri May  4 12:34:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550930101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550930101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 12:34:23 2012] fullrun_mos2_xmm0550930101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri May  4 12:34:23 2012] fullrun_mos2_xmm0550930101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May  4 12:34:23 2012] Fit fullrun_mos2_xmm0550930101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri May  4 12:34:39 2012] Spatial fit model total counts = 137.977000, observed total counts = 126.000000
[Fri May  4 12:34:39 2012] Offset between fit and detection position for source 9 = 0.013461 pixels
[Fri May  4 12:34:39 2012] 138.145600 total counts/ 103.887000 bgd. counts: snr = 3.361159
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.013461 pixels
  Position = (355.3, 255.2) = 3 38 33.96 -35 4 49.4
  Extent = 7.6 (4.9-13.3)", rotation angle = 0
  Source counts = 34.3 +/- 11.8
  Background counts = 103.9
  Rate = 0.003 +/- 0.0009
[Fri May  4 12:34:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 12:34:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 12:34:40 2012] Assessing source extent using major axis lower bound
[Fri May  4 12:34:40 2012] Source does appear to be extended
[Fri May  4 12:34:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 13:35:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  4 13:35:39 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Fri May  4 13:35:39 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.797
[Fri May  4 13:35:39 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.57"
[Fri May  4 14:00:02 2012] fullrun_mos2_xmm0550930101_pi300-10000_cl_pass1_src4.ximg exists
[Fri May  4 14:00:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550930101_pi300-10000_cl_pass1_src4.csv
[Fri May  4 14:00:02 2012] fullrun_mos2_xmm0550930101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May  4 14:00:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550930101_pi300-10000_cl_pass1_src4.csv
[Fri May  4 14:00:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550930101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550930101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 14:00:03 2012] fullrun_mos2_xmm0550930101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May  4 14:00:03 2012] fullrun_mos2_xmm0550930101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May  4 14:00:03 2012] Fit fullrun_mos2_xmm0550930101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri May  4 14:00:15 2012] Spatial fit model total counts = 137.989000, observed total counts = 126.000000
[Fri May  4 14:00:15 2012] Offset between fit and detection position for source 9 = 0.001914 pixels
[Fri May  4 14:00:15 2012] 138.160000 total counts/ 103.955000 bgd. counts: snr = 3.354802
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.001914 pixels
  Position = (355.3, 255.2) = 3 38 33.97 -35 4 49.4
  Extent = 7.6 (4.9-13.3)", rotation angle = 0
  Source counts = 34.2 +/- 11.8
  Background counts = 104.0
  Rate = 0.003 +/- 0.0009
[Fri May  4 14:00:15 2012] Vigneting correction estimate = 1.000000
[Fri May  4 14:00:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 14:00:15 2012] Assessing source extent using major axis lower bound
[Fri May  4 14:00:15 2012] Source does appear to be extended
[Fri May  4 14:00:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 14:28:45 2012] XMMSAS src. selection expression = ellipse(30858.588600, 22154.044800, 453.364813, 453.364813, 0.000000, X, Y)
[Fri May  4 14:28:45 2012] Writing source region out to fullrun_mos2_xmm0550930101_pi300-10000_pass1_cl_src9_src.reg
[Fri May  4 14:28:45 2012] Extracting stamp from image fullrun_mos2_xmm0550930101_pi300-10000_cl_sm2.00.img.gz, (329, 229) - (381, 281)
[Fri May  4 14:28:45 2012] XMMSAS bgd. selection expression = annulus(30858.588600, 22154.044800, 755.608022, 1511.216043, X, Y)
[Fri May  4 14:28:45 2012] Writing fullrun_mos2_xmm0550930101_pi300-10000_pass1_cl_src9.gif
[Fri May  4 14:31:04 2012] Mean detx,y = (7275.18, -2938.86) 
[Fri May  4 14:31:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 14:31:30 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 14:31:30 2012] Setting source spectrum file to fullrun_mos2_xmm0550930101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri May  4 14:31:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550930101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri May  4 14:34:44 2012] Not generating rmf since there are only 34 counts
[Fri May  4 14:34:44 2012] rmf not generated due to insufficient counts
[Fri May  4 14:36:26 2012] Updating aperture counts using extracted products
[Fri May  4 14:36:26 2012] Error reading totcts from fullrun_mos2_xmm0550930101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri May  4 14:36:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 14:36:27 2012] Using photon index=1.80, rate=0.00259, arf fullrun_mos2_xmm0550930101_pi300-10000_pass1_cl_src9.arf
[Fri May  4 14:36:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 14:36:27 2012] Updating source flux to 4.3e-14
[Fri May  4 14:36:30 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  4 14:36:31 2012] xmm0550930101/analysis//spectral/fullrun_mos2_xmm0550930101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete