[Fri May  4 10:52:28 2012] Detection parameters:
  Position = (356.1, 255.0) = 3 38 33.66 -35 4 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.4 +/- 9.6
  Background counts = 9.6
  Rate = 0.006 +/- 0.001

[Fri May  4 10:52:29 2012] Off-axis axis estimate = 5.24'
[Fri May  4 11:41:18 2012] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Fri May  4 11:41:18 2012] Initial guess for spatial extent in simple fitting = 9.05"
[Fri May  4 11:41:18 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.127
[Fri May  4 11:41:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.05"
[Fri May  4 12:04:34 2012] fullrun_mos1_xmm0550930101_pi300-10000_cl_pass0_src3.ximg exists
[Fri May  4 12:04:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930101_pi300-10000_cl_pass0_src3.csv
[Fri May  4 12:04:34 2012] fullrun_mos1_xmm0550930101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May  4 12:04:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930101_pi300-10000_cl_pass0_src3.csv
[Fri May  4 12:04:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550930101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550930101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 12:04:34 2012] fullrun_mos1_xmm0550930101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May  4 12:04:34 2012] fullrun_mos1_xmm0550930101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May  4 12:04:34 2012] Fit fullrun_mos1_xmm0550930101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May  4 12:34:36 2012] Spatial fit model total counts = 150.739000, observed total counts = 137.000000
[Fri May  4 12:34:36 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 12:34:36 2012] Vigneting correction estimate = 1.000000
[Fri May  4 12:34:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 12:34:36 2012] Assessing source extent using major
[Fri May  4 12:34:36 2012] Source does appear to be extended
[Fri May  4 12:34:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 13:17:27 2012] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Fri May  4 13:17:27 2012] Initial guess for spatial extent in simple fitting = 9.05"
[Fri May  4 13:17:27 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.127
[Fri May  4 13:17:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.05"
[Fri May  4 13:35:39 2012] fullrun_mos1_xmm0550930101_pi300-10000_cl_pass1_src3.ximg exists
[Fri May  4 13:35:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930101_pi300-10000_cl_pass1_src3.csv
[Fri May  4 13:35:39 2012] fullrun_mos1_xmm0550930101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May  4 13:35:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550930101_pi300-10000_cl_pass1_src3.csv
[Fri May  4 13:35:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550930101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550930101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 13:35:39 2012] fullrun_mos1_xmm0550930101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May  4 13:35:39 2012] fullrun_mos1_xmm0550930101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May  4 13:35:39 2012] Fit fullrun_mos1_xmm0550930101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri May  4 14:00:12 2012] Spatial fit model total counts = 150.926000, observed total counts = 137.000000
[Fri May  4 14:00:12 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 14:00:12 2012] Vigneting correction estimate = 1.000000
[Fri May  4 14:00:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 14:00:12 2012] Assessing source extent using major
[Fri May  4 14:00:12 2012] Source does appear to be extended
[Fri May  4 14:00:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 14:24:31 2012] XMMSAS src. selection expression = ellipse(30933.931610, 22135.353027, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 14:24:31 2012] Writing source region out to fullrun_mos1_xmm0550930101_pi300-10000_pass1_cl_src5_src.reg
[Fri May  4 14:24:31 2012] Extracting stamp from image fullrun_mos1_xmm0550930101_pi300-10000_cl_sm2.00.img.gz, (319, 217) - (394, 292)
[Fri May  4 14:24:31 2012] XMMSAS bgd. selection expression = annulus(30933.931610, 22135.353027, 1087.500000, 2175.000000, X, Y)
[Fri May  4 14:24:31 2012] Writing fullrun_mos1_xmm0550930101_pi300-10000_pass1_cl_src5.gif
[Fri May  4 14:25:23 2012] Mean detx,y = (-2699.27, -7510.99) 
[Fri May  4 14:25:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 14:26:09 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 14:26:09 2012] Setting source spectrum file to fullrun_mos1_xmm0550930101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May  4 14:26:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550930101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri May  4 14:28:04 2012] Not generating rmf since there are only 50 counts
[Fri May  4 14:28:04 2012] rmf not generated due to insufficient counts
[Fri May  4 14:36:26 2012] Updating aperture counts using extracted products
[Fri May  4 14:36:26 2012] Error reading totcts from fullrun_mos1_xmm0550930101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May  4 14:36:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 14:36:26 2012] Using photon index=1.80, rate=0.00598, arf fullrun_mos1_xmm0550930101_pi300-10000_pass1_cl_src5.arf
[Fri May  4 14:36:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 14:36:26 2012] Updating source flux to 9.2e-14
[Fri May  4 14:36:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May  4 14:36:30 2012] xmm0550930101/analysis//spectral/fullrun_mos1_xmm0550930101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete