[Wed Jun 12 05:17:57 2013] Detection parameters:
  Position = (259.9, 162.1) = 22 3 34.87 31 34 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.2 +/- 15.2
  Background counts = 40.4
  Rate = 0.004 +/- 0.0008

[Wed Jun 12 05:17:58 2013] Off-axis axis estimate = 10.27'
[Wed Jun 12 05:20:04 2013] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 05:20:04 2013] Initial guess for spatial extent in simple fitting = 11.56"
[Wed Jun 12 05:20:04 2013] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.902
[Wed Jun 12 05:20:04 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.56"
[Wed Jun 12 05:56:57 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jun 12 05:56:57 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jun 12 05:56:57 2013] Fit fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_src9 appears to have run properly
[Wed Jun 12 05:56:57 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jun 12 05:56:57 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jun 12 05:56:57 2013] Fit fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jun 12 06:19:49 2013] Spatial fit model total counts = 340.537000, observed total counts = 329.000000
[Wed Jun 12 06:19:49 2013] Offset between fit and detection position for source 9 = 1.145017 pixels
[Wed Jun 12 06:19:49 2013] 326.688000 total counts/ 200.021000 bgd. counts: snr = 8.956239
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.145017 pixels
  Position = (259.4, 161.0) = 22 3 35.01 31 34 43.8
  Extent = 23.1 (18.7-46.3)" x 5.9 (4.3-7.7)", rotation angle = 114 (108-121) degrees
  Source counts = 126.7 +/- 18.1
  Background counts = 200.0
  Rate = 0.01 +/- 0.001
[Wed Jun 12 06:19:49 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 06:19:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 06:19:49 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 06:19:49 2013] Source does appear to be extended
[Wed Jun 12 06:19:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.41
[Wed Jun 12 06:19:49 2013] Source is asymmetric
[Wed Jun 12 06:19:49 2013] Source is confused with source 28
[Wed Jun 12 06:19:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 06:19:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 06:19:58 2013] Initial guess for spatial extent in simple fitting = 14.53"
[Wed Jun 12 06:19:58 2013] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.949
[Wed Jun 12 06:19:58 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 14.53"
[Wed Jun 12 06:58:58 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jun 12 06:58:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_src9.csv
[Wed Jun 12 06:58:58 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jun 12 06:58:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_src9.csv
[Wed Jun 12 06:58:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 06:58:59 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jun 12 06:58:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jun 12 06:58:59 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jun 12 06:58:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jun 12 06:58:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 07:11:35 2013] Spatial fit model total counts = 456.515000, observed total counts = 412.000000
[Wed Jun 12 07:11:35 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 07:11:35 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 07:11:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 07:11:35 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 07:11:35 2013] Source does appear to be extended
[Wed Jun 12 07:11:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.41
[Wed Jun 12 07:11:35 2013] Source is asymmetric
[Wed Jun 12 07:11:43 2013] XMMSAS src. selection expression = ellipse(22523.303600, 13962.574000, 1387.722040, 355.877410, 113.689000, X, Y)
[Wed Jun 12 07:11:43 2013] Writing source region out to fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src9_src.reg
[Wed Jun 12 07:11:43 2013] Extracting stamp from image fullrun_pn_xmm0550871001_pi300-10000_cl_sm2.00.img.gz, (180, 81) - (339, 241)
[Wed Jun 12 07:11:43 2013] XMMSAS bgd. selection expression = annulus(22523.303600, 13962.574000, 2312.870067, 4625.740133, X, Y) && !ellipse(19800.603897, 14631.799500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24654.470800, 19333.050600, 1874.296054, 335.617610, 293.111900, X, Y) && !ellipse(24252.255200, 18286.815000, 1546.544045, 370.576011, 110.319100, X, Y) && !ellipse(27029.753510, 17982.246017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23843.424400, 17339.525800, 1607.800046, 499.808814, 113.470800, X, Y) && !ellipse(23190.545940, 15574.897400, 1737.992050, 431.746412, 110.003082, X, Y) && !ellipse(22302.147278, 13673.628632, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 07:11:43 2013] Writing fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src9.gif
[Wed Jun 12 07:20:03 2013] Mean detx,y = (73.25, 13743.82) 
[Wed Jun 12 07:20:06 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 07:21:15 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 07:21:16 2013] Setting source spectrum file to fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jun 12 07:21:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Jun 12 08:19:03 2013] Updating aperture counts using extracted products
[Wed Jun 12 08:19:03 2013] Total counts from fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 230.00
[Wed Jun 12 08:19:03 2013] Total counts from fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1940.00
[Wed Jun 12 08:19:03 2013] Got source and background scale factors 1167956.000000, 16203747.000000
[Wed Jun 12 08:19:03 2013] User source parameters:
  Position = (259.4, 161.0) = 22 3 35.01 31 34 43.8
  Extent = 23.1 (18.7-46.3)" x 5.9 (4.3-7.7)", rotation angle = 114 (108-121) degrees
  Source aperture counts = 90.2 +/- 16.2
  Background aperture counts = 139.8
  Rate = 0.007 +/- 0.001

[Wed Jun 12 08:19:06 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 08:19:06 2013] Using photon index=1.80, rate=0.00986, arf fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src9.arf
[Wed Jun 12 08:19:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 08:19:06 2013] Updating source flux to 7.5e-14
[Wed Jun 12 08:19:12 2013] Flag p found in src. 9 procflags, skipping spectral fitting
[Wed Jun 12 08:19:12 2013] Flag c found in src. 9 procflags, skipping spectral fitting
[Wed Jun 12 08:19:19 2013] xmm0550871001/analysis//spectral/fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete