[Wed Jun 12 05:17:57 2013] Detection parameters: Position = (233.6, 239.7) = 22 3 43.84 31 40 26.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 115.6 +/- 15.8 Background counts = 43.4 Rate = 0.01 +/- 0.002 [Wed Jun 12 05:17:58 2013] Off-axis axis estimate = 6.34' [Wed Jun 12 05:20:04 2013] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting [Wed Jun 12 05:20:04 2013] Initial guess for spatial extent in simple fitting = 9.60" [Wed Jun 12 05:20:04 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.853 [Wed Jun 12 05:20:04 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.60" [Wed Jun 12 05:56:57 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_src20.ximg exists [Wed Jun 12 05:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_src20.csv [Wed Jun 12 05:56:57 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_src20_1.ximg exists [Wed Jun 12 05:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_src20.csv [Wed Jun 12 05:56:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 12 05:56:57 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Wed Jun 12 05:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_tfrozen_src20.csv [Wed Jun 12 05:56:57 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Wed Jun 12 05:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_tfrozen_src20.csv [Wed Jun 12 05:56:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0550871001_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 12 06:19:49 2013] Source 20 is offset by -7.401281 and 3.587480 pixels which is larger than 2 X fitted extent = 1.104662 x 1.104662, not incorporating fit results [Wed Jun 12 06:19:49 2013] Vigneting correction estimate = 1.000000 [Wed Jun 12 06:19:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 12 06:19:49 2013] Assessing source extent using major [Wed Jun 12 06:19:49 2013] Source does appear to be extended [Wed Jun 12 06:19:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 12 06:19:58 2013] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting [Wed Jun 12 06:19:58 2013] Initial guess for spatial extent in simple fitting = 9.60" [Wed Jun 12 06:19:58 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.853 [Wed Jun 12 06:19:58 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 9.60" [Wed Jun 12 06:58:58 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_src18.ximg exists [Wed Jun 12 06:58:58 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_src18_1.ximg exists [Wed Jun 12 06:58:58 2013] Fit fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_src18 appears to have run properly [Wed Jun 12 06:58:59 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_tfrozen_src18.ximg exists [Wed Jun 12 06:58:59 2013] fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists [Wed Jun 12 06:58:59 2013] Fit fullrun_pn_xmm0550871001_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly [Wed Jun 12 07:11:35 2013] Spatial fit model total counts = 271.168000, observed total counts = 267.000000 [Wed Jun 12 07:11:35 2013] Offset between fit and detection position for source 20 = 0.371693 pixels [Wed Jun 12 07:11:35 2013] 275.990800 total counts/ 213.902000 bgd. counts: snr = 4.245275 Spatial fit parameters: Offset between fit and detection position for source 20 = 0.371693 pixels Position = (233.9, 239.6) = 22 3 43.72 31 40 25.6 Extent = 6.0 (4.2-7.6)", rotation angle = 0 Source counts = 62.1 +/- 16.6 Background counts = 213.9 Rate = 0.005 +/- 0.001 [Wed Jun 12 07:11:35 2013] Vigneting correction estimate = 1.000000 [Wed Jun 12 07:11:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 12 07:11:35 2013] Assessing source extent using major axis lower bound [Wed Jun 12 07:11:35 2013] Source does appear to be extended [Wed Jun 12 07:11:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 12 07:11:43 2013] XMMSAS src. selection expression = ellipse(20303.904200, 20800.522800, 357.889210, 357.889210, 0.000000, X, Y) [Wed Jun 12 07:11:43 2013] Writing source region out to fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src20_src.reg [Wed Jun 12 07:11:43 2013] Extracting stamp from image fullrun_pn_xmm0550871001_pi300-10000_cl_sm2.00.img.gz, (213, 219) - (255, 260) [Wed Jun 12 07:11:43 2013] XMMSAS bgd. selection expression = annulus(20303.904200, 20800.522800, 596.482017, 1192.964034, X, Y) && !ellipse(21888.085020, 21129.741600, 590.623217, 590.623217, 0.000000, X, Y) [Wed Jun 12 07:11:43 2013] Writing fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src20.gif [Wed Jun 12 07:25:06 2013] Mean detx,y = (-4414.53, 8285.32) [Wed Jun 12 07:25:08 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 12 07:25:21 2013] Binned source spectrum to 10 counts/bin [Wed Jun 12 07:25:21 2013] Setting source spectrum file to fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Wed Jun 12 07:25:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src20_bgd.pi.gz [Wed Jun 12 07:54:55 2013] Not generating rmf since there are only 62 counts [Wed Jun 12 07:54:55 2013] rmf not generated due to insufficient counts [Wed Jun 12 08:19:04 2013] Updating aperture counts using extracted products [Wed Jun 12 08:19:04 2013] Total counts from fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 100.00 [Wed Jun 12 08:19:04 2013] Total counts from fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src20_bgd.pi.gz = 306.00 [Wed Jun 12 08:19:04 2013] Got source and background scale factors 406400.000000, 2814844.000000 [Wed Jun 12 08:19:05 2013] User source parameters: Position = (233.9, 239.6) = 22 3 43.72 31 40 25.6 Extent = 6.0 (4.2-7.6)", rotation angle = 0 Source aperture counts = 55.8 +/- 11.0 Background aperture counts = 44.2 Rate = 0.004 +/- 0.0009 [Wed Jun 12 08:19:06 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 12 08:19:06 2013] Using photon index=1.80, rate=0.00483, arf fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src20.arf [Wed Jun 12 08:19:06 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 12 08:19:06 2013] Updating source flux to 3.1e-14 [Wed Jun 12 08:19:12 2013] Flag b found in src. 20 procflags, skipping spectral fitting [Wed Jun 12 08:19:12 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting [Wed Jun 12 08:19:19 2013] xmm0550871001/analysis//spectral/fullrun_pn_xmm0550871001_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete