[Fri May 24 16:12:52 2013] Detection parameters:
  Position = (290.5, 320.8) = 8 44 45.00 76 53 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2340.7 +/- 58.7
  Background counts = 58.8
  Rate = 0.1 +/- 0.003

[Fri May 24 16:12:52 2013] Off-axis axis estimate = 1.72'
[Fri May 24 16:35:29 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri May 24 16:35:29 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Fri May 24 16:35:29 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Fri May 24 16:35:29 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri May 24 16:43:42 2013] fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 24 16:43:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_src1.csv
[Fri May 24 16:43:42 2013] fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 24 16:43:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_src1.csv
[Fri May 24 16:43:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 16:43:42 2013] fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 24 16:43:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 24 16:43:42 2013] fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 24 16:43:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 24 16:43:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550870401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 16:43:47 2013] Source 1 is offset by -6.218286 and 5.465143 pixels which is larger than
2 X fitted extent = 0.837674 x 0.837674, not incorporating fit results
[Fri May 24 16:43:47 2013] Vigneting correction estimate = 1.000000
[Fri May 24 16:43:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 16:43:47 2013] Assessing source extent using major
[Fri May 24 16:43:47 2013] Source does appear to be extended
[Fri May 24 16:43:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 17:00:23 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri May 24 17:00:23 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Fri May 24 17:00:23 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Fri May 24 17:00:23 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Fri May 24 17:05:50 2013] fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 24 17:05:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_src1.csv
[Fri May 24 17:05:50 2013] fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 24 17:05:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_src1.csv
[Fri May 24 17:05:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 17:05:50 2013] fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 24 17:05:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 24 17:05:50 2013] fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 24 17:05:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 24 17:05:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550870401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 17:05:54 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.706185 pixels away
[Fri May 24 17:05:54 2013] Vigneting correction estimate = 1.000000
[Fri May 24 17:05:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 17:05:54 2013] Assessing source extent using major
[Fri May 24 17:05:54 2013] Source does appear to be extended
[Fri May 24 17:05:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 17:23:28 2013] Counts = 2340.705566, rescaling region sizes by 2.000000
[Fri May 24 17:23:28 2013] XMMSAS src. selection expression = ellipse(25223.529114, 27857.947418, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 24 17:23:28 2013] Writing source region out to fullrun_mos2_xmm0550870401_pi300-10000_pass1_cl_src1_src.reg
[Fri May 24 17:23:28 2013] Extracting stamp from image fullrun_mos2_xmm0550870401_pi300-10000_cl_sm2.00.img.gz, (215, 246) - (365, 396)
[Fri May 24 17:23:28 2013] XMMSAS bgd. selection expression = annulus(25223.529114, 27857.947418, 4350.000000, 8700.000000, X, Y) && !ellipse(34788.391632, 33972.947174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32937.257416, 27993.276917, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 24 17:23:28 2013] Writing fullrun_mos2_xmm0550870401_pi300-10000_pass1_cl_src1.gif
[Fri May 24 17:23:31 2013] Mean detx,y = (-25.43, 19.75) 
[Fri May 24 17:23:33 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 17:26:40 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 17:26:40 2013] Setting source spectrum file to fullrun_mos2_xmm0550870401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 24 17:26:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550870401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 24 17:27:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 24 17:27:50 2013] rmf not generated due to insufficient counts
[Fri May 24 17:29:09 2013] Updating aperture counts using extracted products
[Fri May 24 17:29:09 2013] Total counts from fullrun_mos2_xmm0550870401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2359.00
[Fri May 24 17:29:10 2013] Total counts from fullrun_mos2_xmm0550870401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 20813.00
[Fri May 24 17:29:10 2013] Got source and background scale factors 4995212.000000, 161699480.000000
[Fri May 24 17:29:10 2013] User source parameters:
  Position = (290.5, 320.8) = 8 44 45.00 76 53 10.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1716.0 +/- 49.6
  Background aperture counts = 643.0
  Rate = 0.09 +/- 0.003

[Fri May 24 17:29:10 2013] Updating counts from extracted products
[Fri May 24 17:29:10 2013] Set source signif. to 1716.05/25.36 = 67.68
[Fri May 24 17:29:11 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 17:29:11 2013] Using photon index=1.80, rate=0.0918, arf fullrun_mos2_xmm0550870401_pi300-10000_pass1_cl_src1.arf
[Fri May 24 17:29:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 17:29:11 2013] Updating source flux to 9.3e-13
[Fri May 24 17:29:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 24 17:29:13 2013] xmm0550870401/analysis//spectral/fullrun_mos2_xmm0550870401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete