[Thu Jul 19 10:36:49 2012] Detection parameters:
  Position = (316.6, 155.4) = 14 38 8.78 -7 7 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.7 +/- 15.7
  Background counts = 78.2
  Rate = 0.007 +/- 0.002

[Thu Jul 19 10:36:49 2012] Off-axis axis estimate = 10.45'
[Thu Jul 19 10:45:48 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 10:45:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 10:45:48 2012] Initial guess for spatial extent in simple fitting = 11.65"
[Thu Jul 19 10:45:48 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.212
[Thu Jul 19 10:45:48 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.65"
[Thu Jul 19 10:50:46 2012] fullrun_mos1_xmm0550870201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 19 10:50:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550870201_pi300-10000_cl_pass0_src3.csv
[Thu Jul 19 10:50:46 2012] fullrun_mos1_xmm0550870201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 19 10:50:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550870201_pi300-10000_cl_pass0_src3.csv
[Thu Jul 19 10:50:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550870201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550870201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 10:50:46 2012] fullrun_mos1_xmm0550870201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 19 10:50:46 2012] fullrun_mos1_xmm0550870201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 19 10:50:46 2012] Fit fullrun_mos1_xmm0550870201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jul 19 11:13:37 2012] Spatial fit model total counts = 418.891000, observed total counts = 419.000000
[Thu Jul 19 11:13:37 2012] Offset between fit and detection position for source 3 = 0.718470 pixels
[Thu Jul 19 11:13:37 2012] 419.378400 total counts/ 393.205000 bgd. counts: snr = 1.319929
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.718470 pixels
  Position = (316.9, 156.0) = 14 38 8.67 -7 7 1.1
  Extent = 7.2 (2.9-18.8)", rotation angle = 0
  Source counts = 26.2 +/- 20.5
  Background counts = 393.2
  Rate = 0.003 +/- 0.002
  Deleting source due to low Poisson probability