[Mon May 28 17:06:06 2012] Detection parameters:
  Position = (284.2, 310.7) = 18 52 37.96 0 42 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 649.6 +/- 43.9
  Background counts = 368.3
  Rate = 0.03 +/- 0.002

[Mon May 28 17:06:07 2012] Off-axis axis estimate = 1.36'
[Mon May 28 17:13:43 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:13:43 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Mon May 28 17:13:43 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.878
[Mon May 28 17:13:43 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.11"
[Mon May 28 17:47:51 2012] fullrun_pn_xmm0550671901_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 28 17:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671901_pi300-10000_cl_pass0_src4.csv
[Mon May 28 17:47:51 2012] fullrun_pn_xmm0550671901_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 28 17:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671901_pi300-10000_cl_pass0_src4.csv
[Mon May 28 17:47:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550671901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550671901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 17:47:51 2012] fullrun_pn_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 28 17:47:51 2012] fullrun_pn_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 28 17:47:51 2012] Fit fullrun_pn_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon May 28 22:42:02 2012] Spatial fit model total counts = 5380.000000, observed total counts = 5374.000000
[Mon May 28 22:42:02 2012] Offset between fit and detection position for source 4 = 1.823702 pixels
[Mon May 28 22:42:02 2012] 5390.090000 total counts/ 4051.310000 bgd. counts: snr = 21.033497
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.823702 pixels
  Position = (282.5, 310.2) = 18 52 38.47 0 42 26.8
  Extent = 14.2 (14.2-28.4)", rotation angle = 0
  Source counts = 1338.8 +/- 73.4
  Background counts = 4051.3
  Rate = 0.04 +/- 0.002
[Mon May 28 22:42:02 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:02 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:42:02 2012] Source does appear to be extended
[Mon May 28 22:42:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 22:42:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 22:42:32 2012] Initial guess for spatial extent in simple fitting = 14.22"
[Mon May 28 22:42:32 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.986
[Mon May 28 22:42:32 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.22"
[Mon May 28 23:13:59 2012] fullrun_pn_xmm0550671901_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 28 23:13:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671901_pi300-10000_cl_pass1_src4.csv
[Mon May 28 23:13:59 2012] fullrun_pn_xmm0550671901_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 28 23:13:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671901_pi300-10000_cl_pass1_src4.csv
[Mon May 28 23:13:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550671901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550671901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 23:14:00 2012] fullrun_pn_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 28 23:14:00 2012] fullrun_pn_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 28 23:14:00 2012] Fit fullrun_pn_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue May 29 04:26:12 2012] Warning, spatial fit 4 centroid is now closest to src. 10
[Tue May 29 04:26:12 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:12 2012] Assessing source extent using major axis lower bound
[Tue May 29 04:26:12 2012] Source does appear to be extended
[Tue May 29 04:26:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 04:26:35 2012] Counts = 1338.780000, rescaling region sizes by 2.000000
[Tue May 29 04:26:35 2012] XMMSAS src. selection expression = ellipse(24526.535000, 26937.335400, 1706.412049, 1706.412049, 0.000000, X, Y)
[Tue May 29 04:26:35 2012] Writing source region out to fullrun_pn_xmm0550671901_pi300-10000_pass1_cl_src4_src.reg
[Tue May 29 04:26:35 2012] Extracting stamp from image fullrun_pn_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (184, 212) - (381, 408)
[Tue May 29 04:26:35 2012] XMMSAS bgd. selection expression = annulus(24526.535000, 26937.335400, 5688.040164, 11376.080327, X, Y) && !ellipse(24503.859580, 24411.364200, 379.056811, 379.056811, 0.000000, X, Y) && !ellipse(25091.613983, 24146.635956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.144000, 23951.048000, 1158.656033, 940.752027, 28.323400, X, Y) && !ellipse(26700.324000, 26049.186000, 1072.632031, 1072.632031, 0.000000, X, Y) && !ellipse(25423.452820, 26217.951752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25210.604431, 25682.257111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26373.780731, 25439.335205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.128113, 25525.328949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21758.907043, 25083.893158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25904.583800, 24992.826260, 690.802420, 690.802420, 0.000000, X, Y) && !ellipse(22313.393982, 24214.838348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23553.587372, 24035.666351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26218.490723, 23704.138153, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 04:26:35 2012] Writing fullrun_pn_xmm0550671901_pi300-10000_pass1_cl_src4.gif
[Tue May 29 04:39:26 2012] Mean detx,y = (356.90, 2154.63) 
[Tue May 29 04:39:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 04:40:31 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 04:40:31 2012] Setting source spectrum file to fullrun_pn_xmm0550671901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 29 04:40:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550671901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 30 03:02:44 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:44 2012] Error reading totcts from fullrun_pn_xmm0550671901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 30 03:02:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:44 2012] Using photon index=1.80, rate=0.0433, arf fullrun_pn_xmm0550671901_pi300-10000_pass1_cl_src4.arf
[Wed May 30 03:02:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:44 2012] Updating source flux to 1e-13