[Mon May 28 17:07:13 2012] Detection parameters:
  Position = (258.9, 255.0) = 18 52 45.31 0 38 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 566.2 +/- 35.7
  Background counts = 136.0
  Rate = 0.02 +/- 0.001

[Mon May 28 17:07:14 2012] Off-axis axis estimate = 4.26'
[Mon May 28 20:33:16 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Mon May 28 20:33:16 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Mon May 28 20:33:16 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.821
[Mon May 28 20:33:16 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.56"
[Mon May 28 22:41:56 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src5.ximg exists
[Mon May 28 22:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src5.csv
[Mon May 28 22:41:56 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May 28 22:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src5.csv
[Mon May 28 22:41:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:41:57 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May 28 22:41:57 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May 28 22:41:57 2012] Fit fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon May 28 22:42:21 2012] Spatial fit model total counts = 3412.260000, observed total counts = 3413.000000
[Mon May 28 22:42:21 2012] Offset between fit and detection position for source 8 = 1.529421 pixels
[Mon May 28 22:42:21 2012] 3378.225000 total counts/ 3057.770000 bgd. counts: snr = 5.795150
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.529421 pixels
  Position = (257.6, 254.2) = 18 52 45.69 0 38 23.2
  Extent = 10.6 (7.8-17.1)", rotation angle = 0
  Source counts = 320.5 +/- 58.1
  Background counts = 3057.8
  Rate = 0.01 +/- 0.002
[Mon May 28 22:42:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:21 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:42:21 2012] Source does appear to be extended
[Mon May 28 22:42:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:21 2012] Source is confused with source 4
[Tue May 29 02:09:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 02:09:31 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Tue May 29 02:09:31 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.042
[Tue May 29 02:09:31 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.61"
[Tue May 29 04:26:08 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 29 04:26:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src5.csv
[Tue May 29 04:26:08 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 29 04:26:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src5.csv
[Tue May 29 04:26:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 04:26:09 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 29 04:26:09 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 29 04:26:09 2012] Fit fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue May 29 04:26:25 2012] Warning, spatial fit 5 centroid is now closest to src. 11
[Tue May 29 04:26:25 2012] Spatial fit model total counts = 3361.580000, observed total counts = 3021.000000
[Tue May 29 04:26:25 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 04:26:25 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:25 2012] Assessing source extent using major axis lower bound
[Tue May 29 04:26:25 2012] Source does appear to be extended
[Tue May 29 04:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 22:48:10 2012] XMMSAS src. selection expression = ellipse(22362.166600, 22064.871000, 636.456018, 636.456018, 0.000000, X, Y)
[Tue May 29 22:48:10 2012] Writing source region out to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src8_src.reg
[Tue May 29 22:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (221, 218) - (294, 291)
[Tue May 29 22:48:10 2012] XMMSAS bgd. selection expression = annulus(22362.166600, 22064.871000, 1060.760031, 2121.520061, X, Y) && !ellipse(23582.187347, 22556.807068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24518.963989, 24397.937134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24831.128000, 21571.824000, 2166.096062, 2166.096062, 0.000000, X, Y) && !ellipse(25589.436000, 22376.238351, 1663.993639, 945.434729, 358.709563, X, Y) && !ellipse(22709.281600, 22271.866000, 1335.488038, 1335.488038, 0.000000, X, Y) && !ellipse(23805.936000, 21107.094994, 1968.128057, 1968.128057, 359.791741, X, Y) && !ellipse(22385.030000, 22488.810000, 1366.136039, 1366.136039, 0.000000, X, Y) && !ellipse(22882.369400, 21817.502000, 2578.192074, 2578.192074, 0.000000, X, Y) && !ellipse(22244.479400, 23735.500000, 1300.608037, 1300.608037, 0.000000, X, Y) && !ellipse(24819.872800, 24348.729400, 1139.752033, 1139.752033, 0.000000, X, Y) && !ellipse(21516.302000, 22876.327000, 1366.136039, 1366.136039, 0.000000, X, Y) && !ellipse(22264.423000, 23973.770000, 1320.152038, 897.384026, 99.739000, X, Y) && !ellipse(23046.756000, 23337.158000, 1235.696036, 1235.696036, 353.847000, X, Y) && !ellipse(23749.037600, 23569.596000, 1235.696036, 1235.696036, -0.000000, X, Y) && !ellipse(21446.968420, 25127.688600, 1332.064038, 743.752021, 90.000000, X, Y) && !ellipse(19736.694917, 23785.813003, 2126.912061, 360.066094, 89.188570, X, Y) && !ellipse(23648.754242, 23790.838135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.888641, 23897.187988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19297.264200, 24999.024000, 1413.824041, 1413.824041, 0.000000, X, Y) && !ellipse(21581.356000, 25405.342000, 1328.696038, 1328.696038, 0.000000, X, Y) && !ellipse(19743.490234, 24127.817108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19686.162200, 23074.920000, 1501.744043, 519.897615, 100.752600, X, Y)
[Tue May 29 22:48:10 2012] Writing fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src8.gif
[Tue May 29 22:57:05 2012] Mean detx,y = (-1698.53, 2661.83) 
[Tue May 29 22:57:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 22:57:12 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 22:57:12 2012] Setting source spectrum file to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 29 22:57:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May 30 03:02:46 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:46 2012] Error reading totcts from fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 30 03:02:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:47 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src8.arf
[Wed May 30 03:02:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:47 2012] Updating source flux to 1.4e-13
[Wed May 30 03:09:36 2012] Flag p found in src. 8 procflags, skipping spectral fitting
[Wed May 30 03:09:36 2012] Flag c found in src. 8 procflags, skipping spectral fitting