[Mon May 28 17:07:13 2012] Detection parameters:
  Position = (302.1, 260.0) = 18 52 32.78 0 38 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 488.6 +/- 32.0
  Background counts = 112.8
  Rate = 0.02 +/- 0.001

[Mon May 28 17:07:14 2012] Off-axis axis estimate = 2.80'
[Mon May 28 20:33:16 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Mon May 28 20:33:16 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Mon May 28 20:33:16 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.662
[Mon May 28 20:33:16 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.83"
[Mon May 28 22:41:56 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src6.ximg exists
[Mon May 28 22:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src6.csv
[Mon May 28 22:41:56 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May 28 22:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src6.csv
[Mon May 28 22:41:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:41:57 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May 28 22:41:57 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 28 22:41:57 2012] Fit fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon May 28 22:42:21 2012] Warning, spatial fit 6 centroid is now closest to src. 22
[Mon May 28 22:42:21 2012] Spatial fit model total counts = 2255.930000, observed total counts = 2309.000000
[Mon May 28 22:42:21 2012] Offset between fit and detection position for source 7 = 4.375834 pixels
[Mon May 28 22:42:21 2012] Warning, changing simple spatial fit ID from 6 to 15
[Mon May 28 22:42:21 2012] 2001.486000 total counts/ 1696.780000 bgd. counts: snr = 7.397215
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 4.375834 pixels
  Position = (304.9, 263.3) = 18 52 31.97 0 39 3.0
  Extent = 9.2 (7.8-11.4)", rotation angle = 0
  Source counts = 304.7 +/- 44.7
  Background counts = 1696.8
  Rate = 0.01 +/- 0.002
[Mon May 28 22:42:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:21 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:42:21 2012] Source does appear to be extended
[Mon May 28 22:42:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:21 2012] Source is confused with source 22
[Tue May 29 02:09:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 02:09:31 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Tue May 29 02:09:31 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.921
[Tue May 29 02:09:31 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.16"
[Tue May 29 04:26:08 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src6.ximg exists
[Tue May 29 04:26:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src6.csv
[Tue May 29 04:26:08 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue May 29 04:26:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src6.csv
[Tue May 29 04:26:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 04:26:09 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue May 29 04:26:09 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue May 29 04:26:09 2012] Fit fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue May 29 04:26:25 2012] Source 7 is offset by 2.037667 and 3.735954 pixels which is larger than
2 X fitted extent = 3.449936 x 3.449936, not incorporating fit results
[Tue May 29 04:26:25 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:25 2012] Assessing source extent using major axis lower bound
[Tue May 29 04:26:25 2012] Source does appear to be extended
[Tue May 29 04:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 22:48:10 2012] XMMSAS src. selection expression = ellipse(26476.450800, 22861.642000, 549.390616, 549.390616, 0.000000, X, Y)
[Tue May 29 22:48:10 2012] Writing source region out to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src7_src.reg
[Tue May 29 22:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (273, 232) - (336, 295)
[Tue May 29 22:48:10 2012] XMMSAS bgd. selection expression = annulus(26476.450800, 22861.642000, 915.651026, 1831.302053, X, Y) && !ellipse(24518.963989, 24397.937134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24831.128000, 21571.824000, 2166.096062, 2166.096062, 0.000000, X, Y) && !ellipse(25589.436000, 22376.238351, 1663.993639, 945.434729, 358.709563, X, Y) && !ellipse(23805.936000, 21107.094994, 1968.128057, 1968.128057, 359.791741, X, Y) && !ellipse(22882.369400, 21817.502000, 2578.192074, 2578.192074, 0.000000, X, Y) && !ellipse(24819.872800, 24348.729400, 1139.752033, 1139.752033, 0.000000, X, Y) && !ellipse(26602.290000, 22958.830000, 1252.768036, 1252.768036, 0.000000, X, Y) && !ellipse(25897.070000, 24888.678000, 898.248026, 898.248026, 0.000000, X, Y) && !ellipse(26779.076000, 23674.757600, 1017.944029, 1017.944029, 0.000000, X, Y) && !ellipse(27400.162600, 25698.375200, 1119.560032, 1119.560032, 0.000000, X, Y) && !ellipse(23749.037600, 23569.596000, 1235.696036, 1235.696036, -0.000000, X, Y) && !ellipse(26623.016296, 24394.695343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25870.856344, 24709.635209, 1320.408837, 991.802537, 321.465036, X, Y) && !ellipse(26032.414000, 25079.356000, 1074.288031, 1074.288031, 0.000000, X, Y) && !ellipse(27335.333200, 26249.900000, 2284.032066, 2284.032066, 0.000000, X, Y) && !ellipse(28485.533400, 25543.867000, 1193.856034, 763.666422, 255.531000, X, Y) && !ellipse(24545.888641, 23897.187988, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 22:48:10 2012] Writing fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src7.gif
[Tue May 29 22:57:15 2012] Mean detx,y = (2169.62, 1344.07) 
[Tue May 29 22:57:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 22:57:22 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 22:57:22 2012] Setting source spectrum file to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue May 29 22:57:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed May 30 03:02:46 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:46 2012] Error reading totcts from fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed May 30 03:02:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:47 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src7.arf
[Wed May 30 03:02:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:47 2012] Updating source flux to 1.2e-13
[Wed May 30 03:09:36 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Wed May 30 03:09:36 2012] Flag c found in src. 7 procflags, skipping spectral fitting