[Mon May 28 17:07:14 2012] Detection parameters: Position = (293.0, 300.1) = 18 52 35.43 0 41 39.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 125.8 +/- 22.0 Background counts = 131.1 Rate = 0.004 +/- 0.0007 [Mon May 28 17:07:14 2012] Off-axis axis estimate = 0.41' [Mon May 28 20:33:16 2012] Using EEF radius (= 6.64 ")to estimate initial spatial extent for simple fitting [Mon May 28 20:33:16 2012] Initial guess for spatial extent in simple fitting = 6.64" [Mon May 28 20:33:16 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.975 [Mon May 28 20:33:16 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 6.64" [Mon May 28 22:41:56 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src40.ximg exists [Mon May 28 22:41:56 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src40_1.ximg exists [Mon May 28 22:41:56 2012] Fit fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src40 appears to have run properly [Mon May 28 22:41:57 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src40.ximg exists [Mon May 28 22:41:57 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists [Mon May 28 22:41:57 2012] Fit fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly [Mon May 28 22:42:21 2012] Warning, spatial fit 40 centroid is now closest to src. 23 [Mon May 28 22:42:21 2012] Spatial fit model total counts = 1858.510000, observed total counts = 1857.000000 [Mon May 28 22:42:21 2012] Offset between fit and detection position for source 41 = 1.512702 pixels [Mon May 28 22:42:21 2012] Warning, changing simple spatial fit ID from 40 to 48 [Mon May 28 22:42:21 2012] 1829.029000 total counts/ 1657.590000 bgd. counts: snr = 4.210863 Spatial fit parameters: Offset between fit and detection position for source 41 = 1.512702 pixels Position = (293.1, 301.6) = 18 52 35.38 0 41 49.4 Extent = 13.1 (13.0-26.1)" x 11.3 (7.7-13.1)", rotation angle = 285 (90-90) degrees Source counts = 171.4 +/- 42.8 Background counts = 1657.6 Rate = 0.006 +/- 0.002 [Mon May 28 22:42:21 2012] Vigneting correction estimate = 1.000000 [Mon May 28 22:42:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 28 22:42:21 2012] Assessing source extent using major axis lower bound [Mon May 28 22:42:21 2012] Source does appear to be extended [Mon May 28 22:42:21 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99 [Mon May 28 22:42:21 2012] Source is confused with source 43 [Tue May 29 02:09:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 29 02:09:31 2012] Initial guess for spatial extent in simple fitting = 12.18" [Tue May 29 02:09:31 2012] source mask rpix=2.8, npix_max = 43, mask sum = 40, frac = 0.918 [Tue May 29 02:09:31 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 12.18" [Tue May 29 04:26:09 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src35.ximg exists [Tue May 29 04:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src35.csv [Tue May 29 04:26:09 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src35_1.ximg exists [Tue May 29 04:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src35.csv [Tue May 29 04:26:09 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src35_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 29 04:26:09 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Tue May 29 04:26:09 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Tue May 29 04:26:09 2012] Fit fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly [Tue May 29 04:26:25 2012] Warning, spatial fit 35 centroid is now closest to src. 14 [Tue May 29 04:26:25 2012] Spatial fit model total counts = 1861.580000, observed total counts = 1857.000000 [Tue May 29 04:26:25 2012] Offset between fit and detection position for source 41 = 0.899247 pixels [Tue May 29 04:26:25 2012] Warning, changing simple spatial fit ID from 35 to 43 [Tue May 29 04:26:25 2012] 1784.862000 total counts/ 1540.550000 bgd. counts: snr = 6.224535 Spatial fit parameters: Offset between fit and detection position for source 41 = 0.899247 pixels Position = (292.7, 300.8) = 18 52 35.50 0 41 45.9 Extent = 13.1 (12.9-26.1)", rotation angle = 0 Source counts = 244.3 +/- 42.2 Background counts = 1540.5 Rate = 0.009 +/- 0.002 [Tue May 29 04:26:25 2012] Vigneting correction estimate = 1.000000 [Tue May 29 04:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 29 04:26:25 2012] Assessing source extent using major axis lower bound [Tue May 29 04:26:25 2012] Source does appear to be extended [Tue May 29 04:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 29 22:48:11 2012] XMMSAS src. selection expression = ellipse(25417.982000, 26119.500000, 784.380023, 784.380023, 0.000000, X, Y) [Tue May 29 22:48:11 2012] Writing source region out to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src41_src.reg [Tue May 29 22:48:11 2012] Extracting stamp from image fullrun_mos2_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (248, 256) - (338, 346) [Tue May 29 22:48:11 2012] XMMSAS bgd. selection expression = annulus(25417.982000, 26119.500000, 1307.300038, 2614.600075, X, Y) && !ellipse(24518.963989, 24397.937134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24831.128000, 21571.824000, 2166.096062, 2166.096062, 0.000000, X, Y) && !ellipse(25589.436000, 22376.238351, 1663.993639, 945.434729, 358.709563, X, Y) && !ellipse(26476.450800, 22861.642000, 732.520821, 732.520821, 0.000000, X, Y) && !ellipse(22709.281600, 22271.866000, 1335.488038, 1335.488038, 0.000000, X, Y) && !ellipse(22385.030000, 22488.810000, 1366.136039, 1366.136039, 0.000000, X, Y) && !ellipse(22882.369400, 21817.502000, 2578.192074, 2578.192074, 0.000000, X, Y) && !ellipse(24252.908813, 26898.231323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22244.479400, 23735.500000, 1300.608037, 1300.608037, 0.000000, X, Y) && !ellipse(24819.872800, 24348.729400, 1139.752033, 1139.752033, 0.000000, X, Y) && !ellipse(27345.400600, 26540.400800, 981.248028, 981.248028, 0.000000, X, Y) && !ellipse(26602.290000, 22958.830000, 1252.768036, 1252.768036, 0.000000, X, Y) && !ellipse(24698.962000, 26959.688000, 1011.904029, 1011.904029, 0.000000, X, Y) && !ellipse(25897.070000, 24888.678000, 898.248026, 898.248026, 0.000000, X, Y) && !ellipse(26779.076000, 23674.757600, 1017.944029, 1017.944029, 0.000000, X, Y) && !ellipse(21516.302000, 22876.327000, 1366.136039, 1366.136039, 0.000000, X, Y) && !ellipse(27400.162600, 25698.375200, 1119.560032, 1119.560032, 0.000000, X, Y) && !ellipse(22264.423000, 23973.770000, 1320.152038, 897.384026, 99.739000, X, Y) && !ellipse(23046.756000, 23337.158000, 1235.696036, 1235.696036, 353.847000, X, Y) && !ellipse(23749.037600, 23569.596000, 1235.696036, 1235.696036, -0.000000, X, Y) && !ellipse(26623.016296, 24394.695343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25870.856344, 24709.635209, 1320.408837, 991.802537, 321.465036, X, Y) && !ellipse(26032.414000, 25079.356000, 1074.288031, 1074.288031, 0.000000, X, Y) && !ellipse(27335.333200, 26249.900000, 2284.032066, 2284.032066, 0.000000, X, Y) && !ellipse(23648.754242, 23790.838135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28485.533400, 25543.867000, 1193.856034, 763.666422, 255.531000, X, Y) && !ellipse(24545.888641, 23897.187988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21581.356000, 25405.342000, 1328.696038, 1328.696038, 0.000000, X, Y) && !ellipse(25780.020599, 25694.693268, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 29 22:48:11 2012] Writing fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src41.gif [Tue May 29 23:25:19 2012] Mean detx,y = (690.65, -1720.88) [Tue May 29 23:25:19 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 29 23:25:30 2012] Binned source spectrum to 10 counts/bin [Tue May 29 23:25:30 2012] Setting source spectrum file to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Tue May 29 23:25:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src41_bgd.pi.gz [Wed May 30 03:02:47 2012] Updating aperture counts using extracted products [Wed May 30 03:02:47 2012] Error reading totcts from fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Wed May 30 03:02:48 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 30 03:02:48 2012] Using photon index=1.80, rate=0.0088, arf fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src41.arf [Wed May 30 03:02:48 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 30 03:02:48 2012] Updating source flux to 9.3e-14 [Wed May 30 03:09:36 2012] Flag c found in src. 41 procflags, skipping spectral fitting