[Mon May 28 17:07:14 2012] Detection parameters:
  Position = (245.0, 269.0) = 18 52 49.32 0 39 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.9 +/- 27.7
  Background counts = 136.1
  Rate = 0.01 +/- 0.001

[Mon May 28 17:07:14 2012] Off-axis axis estimate = 4.42'
[Mon May 28 20:33:16 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Mon May 28 20:33:16 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Mon May 28 20:33:16 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Mon May 28 20:33:16 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.64"
[Mon May 28 22:41:56 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src19.ximg exists
[Mon May 28 22:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src19.csv
[Mon May 28 22:41:56 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon May 28 22:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src19.csv
[Mon May 28 22:41:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:41:57 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon May 28 22:41:57 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon May 28 22:41:57 2012] Fit fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon May 28 22:42:21 2012] Spatial fit model total counts = 3248.040000, observed total counts = 3250.000000
[Mon May 28 22:42:21 2012] Offset between fit and detection position for source 21 = 6.158968 pixels
[Mon May 28 22:42:21 2012] Warning, changing simple spatial fit ID from 19 to 9
[Mon May 28 22:42:21 2012] 3325.391000 total counts/ 2761.480000 bgd. counts: snr = 10.730986
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 6.158968 pixels
  Position = (247.9, 263.5) = 18 52 48.50 0 39 3.7
  Extent = 17.1 (17.0-34.2)", rotation angle = 0
  Source counts = 563.9 +/- 57.7
  Background counts = 2761.5
  Rate = 0.02 +/- 0.002
[Mon May 28 22:42:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:21 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:42:21 2012] Source does appear to be extended
[Mon May 28 22:42:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:21 2012] Source is confused with source 3
[Tue May 29 02:09:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 02:09:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 02:09:31 2012] Initial guess for spatial extent in simple fitting = 17.08"
[Tue May 29 02:09:31 2012] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.034
[Tue May 29 02:09:31 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 17.08"
[Tue May 29 04:26:08 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src18.ximg exists
[Tue May 29 04:26:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src18.csv
[Tue May 29 04:26:08 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue May 29 04:26:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src18.csv
[Tue May 29 04:26:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 04:26:09 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue May 29 04:26:09 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue May 29 04:26:09 2012] Fit fullrun_mos2_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue May 29 04:26:25 2012] Warning, spatial fit 18 centroid is now closest to src. 32
[Tue May 29 04:26:25 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:25 2012] Assessing source extent using major axis lower bound
[Tue May 29 04:26:25 2012] Source does appear to be extended
[Tue May 29 04:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 22:48:10 2012] XMMSAS src. selection expression = ellipse(21516.302000, 22876.327000, 1024.602029, 1024.602029, 0.000000, X, Y)
[Tue May 29 22:48:10 2012] Writing source region out to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src21_src.reg
[Tue May 29 22:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (189, 205) - (307, 322)
[Tue May 29 22:48:10 2012] XMMSAS bgd. selection expression = annulus(21516.302000, 22876.327000, 1707.670049, 3415.340098, X, Y) && !ellipse(23582.187347, 22556.807068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24518.963989, 24397.937134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24831.128000, 21571.824000, 2166.096062, 2166.096062, 0.000000, X, Y) && !ellipse(25589.436000, 22376.238351, 1663.993639, 945.434729, 358.709563, X, Y) && !ellipse(22362.166600, 22064.871000, 848.608024, 848.608024, 0.000000, X, Y) && !ellipse(22709.281600, 22271.866000, 1335.488038, 1335.488038, 0.000000, X, Y) && !ellipse(23805.936000, 21107.094994, 1968.128057, 1968.128057, 359.791741, X, Y) && !ellipse(22385.030000, 22488.810000, 1366.136039, 1366.136039, 0.000000, X, Y) && !ellipse(22882.369400, 21817.502000, 2578.192074, 2578.192074, 0.000000, X, Y) && !ellipse(24252.908813, 26898.231323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22244.479400, 23735.500000, 1300.608037, 1300.608037, 0.000000, X, Y) && !ellipse(24819.872800, 24348.729400, 1139.752033, 1139.752033, 0.000000, X, Y) && !ellipse(24698.962000, 26959.688000, 1011.904029, 1011.904029, 0.000000, X, Y) && !ellipse(22264.423000, 23973.770000, 1320.152038, 897.384026, 99.739000, X, Y) && !ellipse(23046.756000, 23337.158000, 1235.696036, 1235.696036, 353.847000, X, Y) && !ellipse(23749.037600, 23569.596000, 1235.696036, 1235.696036, -0.000000, X, Y) && !ellipse(21446.968420, 25127.688600, 1332.064038, 743.752021, 90.000000, X, Y) && !ellipse(25870.856344, 24709.635209, 1320.408837, 991.802537, 321.465036, X, Y) && !ellipse(19736.694917, 23785.813003, 2126.912061, 360.066094, 89.188570, X, Y) && !ellipse(21284.732000, 26537.644000, 1023.360029, 1023.360029, 0.000000, X, Y) && !ellipse(23648.754242, 23790.838135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.888641, 23897.187988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25417.982000, 26119.500000, 1045.840030, 1045.840030, 0.000000, X, Y) && !ellipse(19297.264200, 24999.024000, 1413.824041, 1413.824041, 0.000000, X, Y) && !ellipse(21444.140200, 26909.766000, 1332.752038, 652.109619, 111.552000, X, Y) && !ellipse(21581.356000, 25405.342000, 1328.696038, 1328.696038, 0.000000, X, Y) && !ellipse(19743.490234, 24127.817108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25780.020599, 25694.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19686.162200, 23074.920000, 1501.744043, 519.897615, 100.752600, X, Y)
[Tue May 29 22:48:10 2012] Writing fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src21.gif
[Tue May 29 23:13:39 2012] Mean detx,y = (-2521.05, 1961.98) 
[Tue May 29 23:13:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 23:13:46 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 23:13:46 2012] Setting source spectrum file to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue May 29 23:13:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed May 30 03:02:46 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:46 2012] Error reading totcts from fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed May 30 03:02:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:47 2012] Using photon index=1.80, rate=0.0203, arf fullrun_mos2_xmm0550671901_pi300-10000_pass1_cl_src21.arf
[Wed May 30 03:02:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:47 2012] Updating source flux to 2.2e-13
[Wed May 30 03:09:36 2012] Flag c found in src. 21 procflags, skipping spectral fitting