[Mon May 28 17:07:13 2012] Detection parameters:
  Position = (298.5, 274.0) = 18 52 33.83 0 39 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 372.0 +/- 30.2
  Background counts = 143.5
  Rate = 0.01 +/- 0.001

[Mon May 28 17:07:14 2012] Off-axis axis estimate = 1.77'
[Mon May 28 20:33:16 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Mon May 28 20:33:16 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Mon May 28 20:33:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Mon May 28 20:33:16 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.31"
[Mon May 28 22:41:56 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 28 22:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src11.csv
[Mon May 28 22:41:56 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 28 22:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src11.csv
[Mon May 28 22:41:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:41:57 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 28 22:41:57 2012] fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 28 22:41:57 2012] Fit fullrun_mos2_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May 28 22:42:21 2012] Spatial fit model total counts = 2536.130000, observed total counts = 2534.000000
[Mon May 28 22:42:21 2012] Offset between fit and detection position for source 2 = 5.394194 pixels
[Mon May 28 22:42:21 2012] 2562.011000 total counts/ 2203.250000 bgd. counts: snr = 7.643167
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 5.394194 pixels
  Position = (293.2, 275.2) = 18 52 35.36 0 39 54.5
  Extent = 14.6 (14.5-29.3)", rotation angle = 0
  Source counts = 358.8 +/- 50.6
  Background counts = 2203.2
  Rate = 0.01 +/- 0.002
[Mon May 28 22:42:21 2012] Source 2 is offset by -3.970598 and 1.070518 pixels which is larger than
2 X fitted extent = 3.608147 x 3.608147, not incorporating fit results
[Mon May 28 22:42:21 2012] Spatial fit model total counts = 2735.250000, observed total counts = 2735.000000
[Mon May 28 22:42:21 2012] Offset between fit and detection position for source 2 = 2.347221 pixels
[Mon May 28 22:42:21 2012] Warning, changing simple spatial fit ID from 11 to 27
[Mon May 28 22:42:21 2012] 2670.485100 total counts/ 2607.020000 bgd. counts: snr = 1.242976
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.347221 pixels
  Position = (295.5, 275.5) = 18 52 34.68 0 39 56.0
  Extent = 6.3 (3.9-9.7)", rotation angle = 0
  Source counts = 63.5 +/- 51.7
  Background counts = 2607.0
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability