[Mon May 28 17:06:40 2012] Detection parameters:
  Position = (264.9, 251.0) = 18 52 43.57 0 38 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 440.0 +/- 33.3
  Background counts = 142.8
  Rate = 0.02 +/- 0.001

[Mon May 28 17:06:41 2012] Off-axis axis estimate = 4.21'
[Mon May 28 17:47:51 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Mon May 28 17:47:51 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.825
[Mon May 28 17:47:51 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.54"
[Mon May 28 20:33:13 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src9.ximg exists
[Mon May 28 20:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src9.csv
[Mon May 28 20:33:13 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon May 28 20:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src9.csv
[Mon May 28 20:33:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon May 28 20:33:15 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon May 28 22:42:14 2012] Spatial fit model total counts = 3350.610000, observed total counts = 3323.000000
[Mon May 28 22:42:14 2012] Offset between fit and detection position for source 8 = 7.116281 pixels
[Mon May 28 22:42:14 2012] 3326.200000 total counts/ 2221.880000 bgd. counts: snr = 23.427969
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 7.116281 pixels
  Position = (259.8, 256.0) = 18 52 45.05 0 38 31.0
  Extent = 17.1 (17.0-34.1)", rotation angle = 0
  Source counts = 1104.3 +/- 57.7
  Background counts = 2221.9
  Rate = 0.04 +/- 0.002
[Mon May 28 22:42:14 2012] Source 8 is offset by -3.008552 and -4.780115 pixels which is larger than
2 X fitted extent = 3.752694 x 3.752694, not incorporating fit results
[Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:14 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:42:14 2012] Source does appear to be extended
[Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:14 2012] Source is confused with source 7
[Mon May 28 23:14:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 23:14:00 2012] Initial guess for spatial extent in simple fitting = 17.07"
[Mon May 28 23:14:00 2012] source mask rpix=3.9, npix_max = 78, mask sum = 72, frac = 0.919
[Mon May 28 23:14:00 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 17.07"
[Tue May 29 02:09:29 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src8.ximg exists
[Tue May 29 02:09:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src8.csv
[Tue May 29 02:09:29 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue May 29 02:09:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src8.csv
[Tue May 29 02:09:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue May 29 02:09:30 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue May 29 04:26:19 2012] Source 8 is offset by -4.250506 and 6.104184 pixels which is larger than
2 X fitted extent = 15.923219 x 5.652874, not incorporating fit results
[Tue May 29 04:26:19 2012] Warning, spatial fit 8 centroid is now closest to src. 10
[Tue May 29 04:26:19 2012] Source 8 is offset by -2.941011 and -4.801471 pixels which is larger than
2 X fitted extent = 3.685687 x 3.685687, not incorporating fit results
[Tue May 29 04:26:19 2012] Source 8 is offset by -2.415342 and -5.782483 pixels which is larger than
2 X fitted extent = 4.897471 x 2.267168, not incorporating fit results
[Tue May 29 04:26:19 2012] Spatial fit model total counts = 3025.180000, observed total counts = 3057.000000
[Tue May 29 04:26:19 2012] Offset between fit and detection position for source 8 = 2.915947 pixels
[Tue May 29 04:26:19 2012] Warning, changing simple spatial fit ID from 8 to 31
[Tue May 29 04:26:19 2012] 2798.348000 total counts/ 2281.620000 bgd. counts: snr = 10.817835
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.915947 pixels
  Position = (261.5, 258.3) = 18 52 44.56 0 38 41.3
  Extent = 16.3 (16.3-16.4)", rotation angle = 0
  Source counts = 516.7 +/- 52.9
  Background counts = 2281.6
  Rate = 0.02 +/- 0.002
[Tue May 29 04:26:19 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:19 2012] Assessing source extent using major axis lower bound
[Tue May 29 04:26:19 2012] Source does appear to be extended
[Tue May 29 04:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 05:46:56 2012] XMMSAS src. selection expression = ellipse(22700.238000, 22427.446000, 980.316028, 980.316028, 0.000000, X, Y)
[Tue May 29 05:46:56 2012] Writing source region out to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src8_src.reg
[Tue May 29 05:46:56 2012] Extracting stamp from image fullrun_mos1_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (205, 202) - (318, 315)
[Tue May 29 05:46:56 2012] XMMSAS bgd. selection expression = annulus(22700.238000, 22427.446000, 1633.860047, 3267.720094, X, Y) && !ellipse(24545.404000, 24481.674000, 271.328008, 271.328008, 0.000000, X, Y) && !ellipse(24297.034000, 21374.275200, 1372.600039, 1372.600039, 0.000000, X, Y) && !ellipse(22701.218000, 21919.996000, 1385.320040, 1385.320040, 0.000000, X, Y) && !ellipse(24729.176000, 21601.169400, 2745.200079, 1186.096034, 332.279000, X, Y) && !ellipse(21828.461400, 22720.737200, 1367.720039, 1367.720039, 0.000000, X, Y) && !ellipse(23168.098000, 21442.994000, 2731.488079, 2731.488079, 0.000000, X, Y) && !ellipse(25850.438000, 22115.258000, 1385.432040, 1385.432040, 0.000000, X, Y) && !ellipse(25636.324460, 23816.547000, 673.826419, 673.826419, 0.000000, X, Y) && !ellipse(23230.532000, 21221.958000, 1494.408043, 1494.408043, 0.000000, X, Y) && !ellipse(23671.076000, 23299.327000, 1303.120037, 1303.120037, 0.000000, X, Y) && !ellipse(27160.374000, 26573.186000, 1401.440040, 1401.440040, 0.000000, X, Y) && !ellipse(19730.303000, 23764.213800, 363.158410, 363.158410, 0.000000, X, Y) && !ellipse(23955.986000, 23312.762000, 1308.520038, 1308.520038, 0.000000, X, Y) && !ellipse(21512.698100, 25136.819600, 760.465622, 760.465622, 0.000000, X, Y) && !ellipse(26481.978000, 23645.576000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(25189.708000, 23620.190000, 1227.376035, 1227.376035, 0.000000, X, Y) && !ellipse(25582.791748, 22952.010834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25750.384000, 23803.447900, 716.985621, 716.985621, 0.000000, X, Y) && !ellipse(26891.086800, 24286.720000, 1147.328033, 1147.328033, 0.000000, X, Y) && !ellipse(25755.989929, 24915.030640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.851200, 23245.204000, 1195.832034, 1195.832034, 0.000000, X, Y) && !ellipse(21513.569800, 26897.698000, 1340.016039, 1340.016039, 0.000000, X, Y) && !ellipse(25940.012000, 25080.564000, 1071.872031, 1071.872031, 0.000000, X, Y) && !ellipse(22762.683350, 23303.802216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23362.188965, 22581.658142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19105.683220, 24224.778000, 1487.080043, 201.902406, 87.336110, X, Y) && !ellipse(19682.280400, 23090.976000, 995.688029, 995.688029, 0.000000, X, Y) && !ellipse(23802.026428, 22698.588287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.674835, 24493.279236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19187.914734, 25507.898682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24631.194000, 24631.194000, 1100.608032, 1100.608032, 0.000000, X, Y) && !ellipse(19129.923584, 24794.086090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27051.042800, 27401.680000, 1938.000056, 1938.000056, 0.000000, X, Y) && !ellipse(19783.003200, 24461.428000, 808.216023, 808.216023, 0.000000, X, Y) && !ellipse(19570.807129, 22764.069275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21252.970200, 26136.653200, 531.330415, 531.330415, 0.000000, X, Y) && !ellipse(25622.227200, 25747.814000, 1456.184042, 1456.184042, 202.730000, X, Y) && !ellipse(19727.688828, 24226.247009, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 05:46:56 2012] Writing fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src8.gif
[Tue May 29 06:00:16 2012] Mean detx,y = (2539.84, 1341.80) 
[Tue May 29 06:00:17 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 06:00:25 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 06:00:25 2012] Setting source spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 29 06:00:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May 30 03:02:45 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:45 2012] Error reading totcts from fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 30 03:02:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:45 2012] Using photon index=1.80, rate=0.0186, arf fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src8.arf
[Wed May 30 03:02:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:45 2012] Updating source flux to 1.8e-13
[Wed May 30 03:02:49 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Wed May 30 03:02:49 2012] Flag c found in src. 8 procflags, skipping spectral fitting