[Mon May 28 17:06:41 2012] Detection parameters:
  Position = (269.1, 260.1) = 18 52 42.35 0 38 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.9 +/- 25.9
  Background counts = 174.3
  Rate = 0.006 +/- 0.0009

[Mon May 28 17:06:41 2012] Off-axis axis estimate = 3.50'
[Mon May 28 17:47:51 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Mon May 28 17:47:51 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.706
[Mon May 28 17:47:51 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.18"
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src35.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src35.csv
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src35_1.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src35.csv
[Mon May 28 20:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Mon May 28 20:33:15 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Mon May 28 22:42:14 2012] Source 59 is offset by 6.163629 and -1.403309 pixels which is larger than
2 X fitted extent = 3.700014 x 3.700014, not incorporating fit results
[Mon May 28 22:42:14 2012] Warning, spatial fit 35 centroid is now closest to src. 55
[Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:14 2012] Assessing source extent using major
[Mon May 28 22:42:14 2012] Source does appear to be extended
[Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:14 2012] Source is confused with source 7
[Mon May 28 23:14:00 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Mon May 28 23:14:00 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Mon May 28 23:14:00 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.706
[Mon May 28 23:14:00 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 8.18"
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src31.ximg exists
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue May 29 02:09:30 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src31 appears to have run properly
[Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue May 29 02:09:31 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Tue May 29 04:26:19 2012] Warning, spatial fit 31 centroid is now closest to src. 8
[Tue May 29 04:26:19 2012] Source 59 is offset by 2.474448 and 5.414461 pixels which is larger than
2 X fitted extent = 0.930966 x 2.690212, not incorporating fit results
[Tue May 29 04:26:19 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:19 2012] Assessing source extent using major
[Tue May 29 04:26:19 2012] Source does appear to be extended
[Tue May 29 04:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 05:46:57 2012] XMMSAS src. selection expression = ellipse(23362.188965, 22581.658142, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 05:46:57 2012] Writing source region out to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src59_src.reg
[Tue May 29 05:46:57 2012] Extracting stamp from image fullrun_mos1_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (232, 223) - (307, 298)
[Tue May 29 05:46:57 2012] XMMSAS bgd. selection expression = annulus(23362.188965, 22581.658142, 1087.500000, 2175.000000, X, Y) && !ellipse(24545.404000, 24481.674000, 271.328008, 271.328008, 0.000000, X, Y) && !ellipse(24297.034000, 21374.275200, 1372.600039, 1372.600039, 0.000000, X, Y) && !ellipse(22701.218000, 21919.996000, 1385.320040, 1385.320040, 0.000000, X, Y) && !ellipse(24729.176000, 21601.169400, 2745.200079, 1186.096034, 332.279000, X, Y) && !ellipse(21828.461400, 22720.737200, 1367.720039, 1367.720039, 0.000000, X, Y) && !ellipse(23168.098000, 21442.994000, 2731.488079, 2731.488079, 0.000000, X, Y) && !ellipse(25850.438000, 22115.258000, 1385.432040, 1385.432040, 0.000000, X, Y) && !ellipse(22700.238000, 22427.446000, 1307.088038, 1307.088038, 0.000000, X, Y) && !ellipse(25636.324460, 23816.547000, 673.826419, 673.826419, 0.000000, X, Y) && !ellipse(23230.532000, 21221.958000, 1494.408043, 1494.408043, 0.000000, X, Y) && !ellipse(23671.076000, 23299.327000, 1303.120037, 1303.120037, 0.000000, X, Y) && !ellipse(23955.986000, 23312.762000, 1308.520038, 1308.520038, 0.000000, X, Y) && !ellipse(21512.698100, 25136.819600, 760.465622, 760.465622, 0.000000, X, Y) && !ellipse(26481.978000, 23645.576000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(25189.708000, 23620.190000, 1227.376035, 1227.376035, 0.000000, X, Y) && !ellipse(25582.791748, 22952.010834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25750.384000, 23803.447900, 716.985621, 716.985621, 0.000000, X, Y) && !ellipse(25755.989929, 24915.030640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.851200, 23245.204000, 1195.832034, 1195.832034, 0.000000, X, Y) && !ellipse(25940.012000, 25080.564000, 1071.872031, 1071.872031, 0.000000, X, Y) && !ellipse(22762.683350, 23303.802216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23802.026428, 22698.588287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.674835, 24493.279236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24631.194000, 24631.194000, 1100.608032, 1100.608032, 0.000000, X, Y) && !ellipse(25622.227200, 25747.814000, 1456.184042, 1456.184042, 202.730000, X, Y)
[Tue May 29 05:46:57 2012] Writing fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src59.gif
[Tue May 29 06:04:08 2012] Mean detx,y = (2271.03, 750.35) 
[Tue May 29 06:04:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 06:04:13 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 06:04:13 2012] Setting source spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Tue May 29 06:04:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Tue May 29 21:56:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 21:56:52 2012] rmf not generated due to insufficient counts
[Wed May 30 03:02:45 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:45 2012] Error reading totcts from fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Wed May 30 03:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:46 2012] Using photon index=1.80, rate=0.00602, arf fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src59.arf
[Wed May 30 03:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:46 2012] Updating source flux to 6.2e-14
[Wed May 30 03:02:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting