[Mon May 28 17:06:41 2012] Detection parameters:
  Position = (227.1, 267.6) = 18 52 54.53 0 39 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.6 +/- 20.2
  Background counts = 98.5
  Rate = 0.006 +/- 0.0008

[Mon May 28 17:06:41 2012] Off-axis axis estimate = 5.64'
[Mon May 28 17:47:51 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Mon May 28 17:47:51 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.088
[Mon May 28 17:47:51 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.25"
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src37.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src37.csv
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src37_1.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src37.csv
[Mon May 28 20:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Mon May 28 20:33:15 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Mon May 28 22:42:14 2012] Warning, spatial fit 37 centroid is now closest to src. 48
[Mon May 28 22:42:14 2012] Source 54 is offset by -6.526198 and -4.050475 pixels which is larger than
2 X fitted extent = 1.078202 x 1.078202, not incorporating fit results
[Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:14 2012] Assessing source extent using major
[Mon May 28 22:42:14 2012] Source does appear to be extended
[Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:14 2012] Source is confused with source 48
[Mon May 28 23:14:00 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Mon May 28 23:14:00 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Mon May 28 23:14:00 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.088
[Mon May 28 23:14:00 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 9.25"
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src33.ximg exists
[Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src33.csv
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src33.csv
[Tue May 29 02:09:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue May 29 02:09:31 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue May 29 04:26:19 2012] Warning, spatial fit 33 centroid is now closest to src. 58
[Tue May 29 04:26:19 2012] Spatial fit model total counts = 868.363000, observed total counts = 873.000000
[Tue May 29 04:26:19 2012] Offset between fit and detection position for source 54 = 1.633604 pixels
[Tue May 29 04:26:19 2012] Warning, changing simple spatial fit ID from 33 to 45
[Tue May 29 04:26:19 2012] 816.809000 total counts/ 529.664000 bgd. counts: snr = 12.476737
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 1.633604 pixels
  Position = (226.8, 266.0) = 18 52 54.62 0 39 14.5
  Extent = 12.4 (10.1-15.5)", rotation angle = 0
  Source counts = 287.1 +/- 28.6
  Background counts = 529.7
  Rate = 0.01 +/- 0.001
[Tue May 29 04:26:19 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:19 2012] Assessing source extent using major axis lower bound
[Tue May 29 04:26:19 2012] Source does appear to be extended
[Tue May 29 04:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 05:46:57 2012] XMMSAS src. selection expression = ellipse(19682.280400, 23090.976000, 746.766021, 746.766021, 0.000000, X, Y)
[Tue May 29 05:46:57 2012] Writing source region out to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src54_src.reg
[Tue May 29 05:46:57 2012] Extracting stamp from image fullrun_mos1_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (184, 223) - (270, 309)
[Tue May 29 05:46:57 2012] XMMSAS bgd. selection expression = annulus(19682.280400, 23090.976000, 1244.610036, 2489.220072, X, Y) && !ellipse(22701.218000, 21919.996000, 1385.320040, 1385.320040, 0.000000, X, Y) && !ellipse(24729.176000, 21601.169400, 2745.200079, 1186.096034, 332.279000, X, Y) && !ellipse(21828.461400, 22720.737200, 1367.720039, 1367.720039, 0.000000, X, Y) && !ellipse(23168.098000, 21442.994000, 2731.488079, 2731.488079, 0.000000, X, Y) && !ellipse(22700.238000, 22427.446000, 1307.088038, 1307.088038, 0.000000, X, Y) && !ellipse(23230.532000, 21221.958000, 1494.408043, 1494.408043, 0.000000, X, Y) && !ellipse(19730.303000, 23764.213800, 363.158410, 363.158410, 0.000000, X, Y) && !ellipse(21512.698100, 25136.819600, 760.465622, 760.465622, 0.000000, X, Y) && !ellipse(21513.569800, 26897.698000, 1340.016039, 1340.016039, 0.000000, X, Y) && !ellipse(22762.683350, 23303.802216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19105.683220, 24224.778000, 1487.080043, 201.902406, 87.336110, X, Y) && !ellipse(19187.914734, 25507.898682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19129.923584, 24794.086090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19783.003200, 24461.428000, 808.216023, 808.216023, 0.000000, X, Y) && !ellipse(19570.807129, 22764.069275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19727.688828, 24226.247009, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 05:46:57 2012] Writing fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src54.gif
[Tue May 29 06:04:47 2012] Mean detx,y = (2225.91, 4381.29) 
[Tue May 29 06:04:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 06:05:02 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 06:05:02 2012] Setting source spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue May 29 06:05:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Wed May 30 03:02:45 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:45 2012] Error reading totcts from fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed May 30 03:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:46 2012] Using photon index=1.80, rate=0.0103, arf fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src54.arf
[Wed May 30 03:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:46 2012] Updating source flux to 1.1e-13
[Wed May 30 03:02:49 2012] Flag b found in src. 54 procflags, skipping spectral fitting
[Wed May 30 03:02:49 2012] Flag c found in src. 54 procflags, skipping spectral fitting