[Mon May 28 17:06:41 2012] Detection parameters:
  Position = (269.1, 267.5) = 18 52 42.36 0 39 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 320.7 +/- 28.3
  Background counts = 163.8
  Rate = 0.01 +/- 0.001

[Mon May 28 17:06:41 2012] Off-axis axis estimate = 3.09'
[Mon May 28 17:47:51 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Mon May 28 17:47:51 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.735
[Mon May 28 17:47:51 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.98"
[Mon May 28 20:33:13 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 28 20:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src15.csv
[Mon May 28 20:33:13 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 28 20:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src15.csv
[Mon May 28 20:33:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 28 20:33:15 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon May 28 22:42:14 2012] Warning, spatial fit 15 centroid is now closest to src. 8
[Mon May 28 22:42:14 2012] Spatial fit model total counts = 2515.010000, observed total counts = 2523.000000
[Mon May 28 22:42:14 2012] Offset between fit and detection position for source 53 = 5.054404 pixels
[Mon May 28 22:42:14 2012] Warning, changing simple spatial fit ID from 15 to 38
[Mon May 28 22:42:14 2012] 2449.127000 total counts/ 2134.000000 bgd. counts: snr = 6.821634
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 5.054404 pixels
  Position = (273.7, 269.4) = 18 52 41.00 0 39 29.3
  Extent = 16.1 (16.0-32.1)", rotation angle = 0
  Source counts = 315.1 +/- 49.5
  Background counts = 2134.0
  Rate = 0.01 +/- 0.002
[Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:14 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:42:14 2012] Source does appear to be extended
[Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:14 2012] Source is confused with source 55
[Mon May 28 22:42:14 2012] Source is confused with source 59
[Mon May 28 22:42:14 2012] Source is confused with source 57
[Mon May 28 23:14:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 23:14:00 2012] Initial guess for spatial extent in simple fitting = 16.06"
[Mon May 28 23:14:00 2012] source mask rpix=3.7, npix_max = 70, mask sum = 65, frac = 0.924
[Mon May 28 23:14:00 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 16.06"
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src12.ximg exists
[Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src12.csv
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src12.csv
[Tue May 29 02:09:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue May 29 02:09:30 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue May 29 04:26:19 2012] Warning, spatial fit 12 centroid is now closest to src. 8
[Tue May 29 04:26:19 2012] Spatial fit model total counts = 4961.370000, observed total counts = 4935.000000
[Tue May 29 04:26:19 2012] Offset between fit and detection position for source 53 = 1.495640 pixels
[Tue May 29 04:26:19 2012] Warning, changing simple spatial fit ID from 12 to 15
[Tue May 29 04:26:19 2012] 4685.651000 total counts/ 4160.810000 bgd. counts: snr = 8.136522
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 1.495640 pixels
  Position = (272.6, 268.4) = 18 52 41.32 0 39 24.9
  Extent = 16.3 (12.5-21.2)", rotation angle = 0
  Source counts = 524.8 +/- 68.5
  Background counts = 4160.8
  Rate = 0.02 +/- 0.002
[Tue May 29 04:26:19 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:19 2012] Assessing source extent using major axis lower bound
[Tue May 29 04:26:19 2012] Source does appear to be extended
[Tue May 29 04:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 05:46:56 2012] XMMSAS src. selection expression = ellipse(23671.076000, 23299.327000, 977.340028, 977.340028, 0.000000, X, Y)
[Tue May 29 05:46:56 2012] Writing source region out to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src53_src.reg
[Tue May 29 05:46:56 2012] Extracting stamp from image fullrun_mos1_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (216, 212) - (329, 325)
[Tue May 29 05:46:56 2012] XMMSAS bgd. selection expression = annulus(23671.076000, 23299.327000, 1628.900047, 3257.800094, X, Y) && !ellipse(24545.404000, 24481.674000, 271.328008, 271.328008, 0.000000, X, Y) && !ellipse(24297.034000, 21374.275200, 1372.600039, 1372.600039, 0.000000, X, Y) && !ellipse(22701.218000, 21919.996000, 1385.320040, 1385.320040, 0.000000, X, Y) && !ellipse(24729.176000, 21601.169400, 2745.200079, 1186.096034, 332.279000, X, Y) && !ellipse(21828.461400, 22720.737200, 1367.720039, 1367.720039, 0.000000, X, Y) && !ellipse(23168.098000, 21442.994000, 2731.488079, 2731.488079, 0.000000, X, Y) && !ellipse(25850.438000, 22115.258000, 1385.432040, 1385.432040, 0.000000, X, Y) && !ellipse(22700.238000, 22427.446000, 1307.088038, 1307.088038, 0.000000, X, Y) && !ellipse(25636.324460, 23816.547000, 673.826419, 673.826419, 0.000000, X, Y) && !ellipse(23230.532000, 21221.958000, 1494.408043, 1494.408043, 0.000000, X, Y) && !ellipse(27160.374000, 26573.186000, 1401.440040, 1401.440040, 0.000000, X, Y) && !ellipse(23955.986000, 23312.762000, 1308.520038, 1308.520038, 0.000000, X, Y) && !ellipse(21512.698100, 25136.819600, 760.465622, 760.465622, 0.000000, X, Y) && !ellipse(26481.978000, 23645.576000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(27599.825920, 25865.984880, 700.720020, 700.720020, 0.000000, X, Y) && !ellipse(25189.708000, 23620.190000, 1227.376035, 1227.376035, 0.000000, X, Y) && !ellipse(25582.791748, 22952.010834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25750.384000, 23803.447900, 716.985621, 716.985621, 0.000000, X, Y) && !ellipse(26891.086800, 24286.720000, 1147.328033, 1147.328033, 0.000000, X, Y) && !ellipse(25755.989929, 24915.030640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.851200, 23245.204000, 1195.832034, 1195.832034, 0.000000, X, Y) && !ellipse(24521.357000, 27000.932400, 1151.184033, 669.616819, 342.882000, X, Y) && !ellipse(27563.550000, 25870.808000, 849.032024, 849.032024, 0.000000, X, Y) && !ellipse(21513.569800, 26897.698000, 1340.016039, 1340.016039, 0.000000, X, Y) && !ellipse(25940.012000, 25080.564000, 1071.872031, 1071.872031, 0.000000, X, Y) && !ellipse(22762.683350, 23303.802216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23362.188965, 22581.658142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19105.683220, 24224.778000, 1487.080043, 201.902406, 87.336110, X, Y) && !ellipse(19682.280400, 23090.976000, 995.688029, 995.688029, 0.000000, X, Y) && !ellipse(23802.026428, 22698.588287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.674835, 24493.279236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27232.802000, 24596.936000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(24631.194000, 24631.194000, 1100.608032, 1100.608032, 0.000000, X, Y) && !ellipse(27051.042800, 27401.680000, 1938.000056, 1938.000056, 0.000000, X, Y) && !ellipse(19783.003200, 24461.428000, 808.216023, 808.216023, 0.000000, X, Y) && !ellipse(19570.807129, 22764.069275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21252.970200, 26136.653200, 531.330415, 531.330415, 0.000000, X, Y) && !ellipse(25622.227200, 25747.814000, 1456.184042, 1456.184042, 202.730000, X, Y) && !ellipse(19727.688828, 24226.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21438.997253, 27251.873260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27850.514000, 25502.668000, 1698.064049, 1698.064049, 0.000000, X, Y)
[Tue May 29 05:46:56 2012] Writing fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src53.gif
[Tue May 29 06:00:52 2012] Mean detx,y = (1552.11, 512.37) 
[Tue May 29 06:00:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 06:01:00 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 06:01:00 2012] Setting source spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue May 29 06:01:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Wed May 30 03:02:45 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:45 2012] Error reading totcts from fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Wed May 30 03:02:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:45 2012] Using photon index=1.80, rate=0.0189, arf fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src53.arf
[Wed May 30 03:02:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:45 2012] Updating source flux to 1.8e-13
[Wed May 30 03:02:49 2012] Flag c found in src. 53 procflags, skipping spectral fitting