[Mon May 28 17:06:41 2012] Detection parameters:
  Position = (244.8, 271.3) = 18 52 49.41 0 39 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.5 +/- 22.1
  Background counts = 132.9
  Rate = 0.006 +/- 0.0008

[Mon May 28 17:06:41 2012] Off-axis axis estimate = 4.36'
[Mon May 28 17:47:51 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Mon May 28 17:47:51 2012] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.854
[Mon May 28 17:47:51 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.61"
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src33.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src33.csv
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src33.csv
[Mon May 28 20:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon May 28 20:33:15 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon May 28 22:42:14 2012] Spatial fit model total counts = 1829.070000, observed total counts = 1830.000000
[Mon May 28 22:42:14 2012] Offset between fit and detection position for source 50 = 1.513180 pixels
[Mon May 28 22:42:14 2012] 1872.635800 total counts/ 1813.270000 bgd. counts: snr = 1.394136
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 1.513180 pixels
  Position = (243.4, 272.1) = 18 52 49.79 0 39 41.0
  Extent = 5.8 (2.8-9.3)", rotation angle = 0
  Source counts = 59.4 +/- 43.3
  Background counts = 1813.3
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability