[Mon May 28 17:06:40 2012] Detection parameters: Position = (220.2, 279.2) = 18 52 56.53 0 40 11.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 156.3 +/- 20.9 Background counts = 87.3 Rate = 0.006 +/- 0.0008 [Mon May 28 17:06:41 2012] Off-axis axis estimate = 5.84' [Mon May 28 17:47:51 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting [Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 9.35" [Mon May 28 17:47:51 2012] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.890 [Mon May 28 17:47:51 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 9.35" [Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src36.ximg exists [Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src36_1.ximg exists [Mon May 28 20:33:14 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src36 appears to have run properly [Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src36.ximg exists [Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists [Mon May 28 20:33:15 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly [Mon May 28 22:42:14 2012] Spatial fit model total counts = 1083.730000, observed total counts = 1091.000000 [Mon May 28 22:42:14 2012] Offset between fit and detection position for source 46 = 0.613148 pixels [Mon May 28 22:42:14 2012] 1042.696000 total counts/ 934.499000 bgd. counts: snr = 3.539369 Spatial fit parameters: Offset between fit and detection position for source 46 = 0.613148 pixels Position = (219.9, 279.7) = 18 52 56.62 0 40 14.2 Extent = 7.5 (5.8-10.0)", rotation angle = 0 Source counts = 108.2 +/- 32.3 Background counts = 934.5 Rate = 0.004 +/- 0.001 [Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000 [Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 28 22:42:14 2012] Assessing source extent using major axis lower bound [Mon May 28 22:42:14 2012] Source does appear to be extended [Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 28 22:42:14 2012] Source is confused with source 36 [Mon May 28 22:42:14 2012] Source is confused with source 43 [Mon May 28 23:14:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 28 23:14:00 2012] Initial guess for spatial extent in simple fitting = 7.49" [Mon May 28 23:14:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.013 [Mon May 28 23:14:00 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 7.49" [Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src32.ximg exists [Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src32.csv [Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src32_1.ximg exists [Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src32.csv [Tue May 29 02:09:30 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src32_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src32.ximg exists [Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists [Tue May 29 02:09:31 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly [Tue May 29 04:26:19 2012] Warning, spatial fit 32 centroid is now closest to src. 43 [Tue May 29 04:26:19 2012] Spatial fit model total counts = 1015.970000, observed total counts = 1014.000000 [Tue May 29 04:26:19 2012] Offset between fit and detection position for source 46 = 0.756343 pixels [Tue May 29 04:26:19 2012] Warning, changing simple spatial fit ID from 32 to 42 [Tue May 29 04:26:19 2012] 998.423600 total counts/ 920.267000 bgd. counts: snr = 2.576373 Spatial fit parameters: Offset between fit and detection position for source 46 = 0.756343 pixels Position = (220.2, 279.0) = 18 52 56.54 0 40 11.2 Extent = 18.6 (11.2-37.2)" x 2.5 (2.3-7.3)", rotation angle = 87 (76-93) degrees Source counts = 78.2 +/- 31.6 Background counts = 920.3 Rate = 0.003 +/- 0.001 [Tue May 29 04:26:19 2012] Vigneting correction estimate = 1.000000 [Tue May 29 04:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 29 04:26:19 2012] Assessing source extent using major axis lower bound [Tue May 29 04:26:19 2012] Source does appear to be extended [Tue May 29 04:26:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.55 [Tue May 29 04:26:19 2012] Source is asymmetric [Tue May 29 05:46:57 2012] XMMSAS src. selection expression = ellipse(19105.683220, 24224.778000, 1115.310032, 151.426804, 87.336110, X, Y) [Tue May 29 05:46:57 2012] Writing source region out to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src46_src.reg [Tue May 29 05:46:57 2012] Extracting stamp from image fullrun_mos1_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (156, 215) - (284, 343) [Tue May 29 05:46:57 2012] XMMSAS bgd. selection expression = annulus(19105.683220, 24224.778000, 1858.850053, 3717.700107, X, Y) && !ellipse(22701.218000, 21919.996000, 1385.320040, 1385.320040, 0.000000, X, Y) && !ellipse(24729.176000, 21601.169400, 2745.200079, 1186.096034, 332.279000, X, Y) && !ellipse(21828.461400, 22720.737200, 1367.720039, 1367.720039, 0.000000, X, Y) && !ellipse(23168.098000, 21442.994000, 2731.488079, 2731.488079, 0.000000, X, Y) && !ellipse(22700.238000, 22427.446000, 1307.088038, 1307.088038, 0.000000, X, Y) && !ellipse(23230.532000, 21221.958000, 1494.408043, 1494.408043, 0.000000, X, Y) && !ellipse(23671.076000, 23299.327000, 1303.120037, 1303.120037, 0.000000, X, Y) && !ellipse(19730.303000, 23764.213800, 363.158410, 363.158410, 0.000000, X, Y) && !ellipse(23955.986000, 23312.762000, 1308.520038, 1308.520038, 0.000000, X, Y) && !ellipse(21512.698100, 25136.819600, 760.465622, 760.465622, 0.000000, X, Y) && !ellipse(21513.569800, 26897.698000, 1340.016039, 1340.016039, 0.000000, X, Y) && !ellipse(22762.683350, 23303.802216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23362.188965, 22581.658142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19682.280400, 23090.976000, 995.688029, 995.688029, 0.000000, X, Y) && !ellipse(19187.914734, 25507.898682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19129.923584, 24794.086090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19783.003200, 24461.428000, 808.216023, 808.216023, 0.000000, X, Y) && !ellipse(19570.807129, 22764.069275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21252.970200, 26136.653200, 531.330415, 531.330415, 0.000000, X, Y) && !ellipse(19727.688828, 24226.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21438.997253, 27251.873260, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 29 05:46:57 2012] Writing fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src46.gif [Tue May 29 06:04:16 2012] Mean detx,y = (1180.42, 5129.69) [Tue May 29 06:04:17 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 29 06:04:44 2012] Binned source spectrum to 10 counts/bin [Tue May 29 06:04:45 2012] Setting source spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src46_src_b10.pi.gz [Tue May 29 06:04:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src46_bgd.pi.gz [Tue May 29 21:57:01 2012] Not generating rmf since there are only 78 counts [Tue May 29 21:57:01 2012] rmf not generated due to insufficient counts [Wed May 30 03:02:45 2012] Updating aperture counts using extracted products [Wed May 30 03:02:45 2012] Error reading totcts from fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src46_src_b10.pi.gz [Wed May 30 03:02:46 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 30 03:02:46 2012] Using photon index=1.80, rate=0.00281, arf fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src46.arf [Wed May 30 03:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 30 03:02:46 2012] Updating source flux to 3.6e-14 [Wed May 30 03:02:49 2012] Flag c found in src. 46 procflags, skipping spectral fitting [Wed May 30 03:02:49 2012] Source 46 has fewer than 100.000000 counts, skipping spectral fitting