[Mon May 28 17:06:40 2012] Detection parameters:
  Position = (227.3, 279.0) = 18 52 54.47 0 40 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.7 +/- 19.2
  Background counts = 101.2
  Rate = 0.003 +/- 0.0007

[Mon May 28 17:06:41 2012] Off-axis axis estimate = 5.35'
[Mon May 28 17:47:51 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Mon May 28 17:47:51 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.116
[Mon May 28 17:47:51 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 9.10"
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src55.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src55.csv
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src55.csv
[Mon May 28 20:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:33:16 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon May 28 20:33:16 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon May 28 20:33:16 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Mon May 28 22:42:14 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 12.341217 pixels away
[Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:14 2012] Assessing source extent using major
[Mon May 28 22:42:14 2012] Source does appear to be extended
[Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:14 2012] Source is confused with source 48
[Mon May 28 23:14:00 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Mon May 28 23:14:00 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Mon May 28 23:14:00 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.116
[Mon May 28 23:14:00 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 9.10"
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src48.ximg exists
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src48_1.ximg exists
[Tue May 29 02:09:30 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src48 appears to have run properly
[Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Tue May 29 02:09:31 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Tue May 29 04:26:19 2012] Source 43 is offset by 1.423872 and 5.162402 pixels which is larger than
2 X fitted extent = 1.358405 x 1.358405, not incorporating fit results
[Tue May 29 04:26:19 2012] Source 43 is offset by 0.118415 and 4.616724 pixels which is larger than
2 X fitted extent = 1.714083 x 1.714083, not incorporating fit results
[Tue May 29 04:26:19 2012] Source 43 is offset by -0.020368 and 5.386678 pixels which is larger than
2 X fitted extent = 2.205945 x 2.205945, not incorporating fit results
[Tue May 29 04:26:19 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:19 2012] Assessing source extent using major
[Tue May 29 04:26:19 2012] Source does appear to be extended
[Tue May 29 04:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 05:46:58 2012] XMMSAS src. selection expression = ellipse(19727.688828, 24226.247009, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 05:46:58 2012] Writing source region out to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src43_src.reg
[Tue May 29 05:46:58 2012] Extracting stamp from image fullrun_mos1_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (190, 242) - (265, 317)
[Tue May 29 05:46:58 2012] XMMSAS bgd. selection expression = annulus(19727.688828, 24226.247009, 1087.500000, 2175.000000, X, Y) && !ellipse(22701.218000, 21919.996000, 1385.320040, 1385.320040, 0.000000, X, Y) && !ellipse(21828.461400, 22720.737200, 1367.720039, 1367.720039, 0.000000, X, Y) && !ellipse(23168.098000, 21442.994000, 2731.488079, 2731.488079, 0.000000, X, Y) && !ellipse(22700.238000, 22427.446000, 1307.088038, 1307.088038, 0.000000, X, Y) && !ellipse(23230.532000, 21221.958000, 1494.408043, 1494.408043, 0.000000, X, Y) && !ellipse(19730.303000, 23764.213800, 363.158410, 363.158410, 0.000000, X, Y) && !ellipse(21512.698100, 25136.819600, 760.465622, 760.465622, 0.000000, X, Y) && !ellipse(21513.569800, 26897.698000, 1340.016039, 1340.016039, 0.000000, X, Y) && !ellipse(22762.683350, 23303.802216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19105.683220, 24224.778000, 1487.080043, 201.902406, 87.336110, X, Y) && !ellipse(19682.280400, 23090.976000, 995.688029, 995.688029, 0.000000, X, Y) && !ellipse(19187.914734, 25507.898682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19129.923584, 24794.086090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19783.003200, 24461.428000, 808.216023, 808.216023, 0.000000, X, Y) && !ellipse(19570.807129, 22764.069275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21252.970200, 26136.653200, 531.330415, 531.330415, 0.000000, X, Y) && !ellipse(21438.997253, 27251.873260, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 05:46:58 2012] Writing fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src43.gif
[Tue May 29 06:07:59 2012] Mean detx,y = (1217.75, 4527.60) 
[Tue May 29 06:07:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 06:08:11 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 06:08:11 2012] Setting source spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Tue May 29 06:08:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Tue May 29 22:35:02 2012] Not generating rmf since there are only 96 counts
[Tue May 29 22:35:03 2012] rmf not generated due to insufficient counts
[Wed May 30 03:02:45 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:45 2012] Error reading totcts from fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed May 30 03:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:46 2012] Using photon index=1.80, rate=0.00349, arf fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src43.arf
[Wed May 30 03:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:46 2012] Updating source flux to 3.8e-14
[Wed May 30 03:02:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting