[Mon May 28 17:06:40 2012] Detection parameters: Position = (326.0, 293.0) = 18 52 25.85 0 41 11.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 125.0 +/- 20.2 Background counts = 87.3 Rate = 0.005 +/- 0.0008 [Mon May 28 17:06:41 2012] Off-axis axis estimate = 2.04' [Mon May 28 17:47:51 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting [Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 7.45" [Mon May 28 17:47:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818 [Mon May 28 17:47:51 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.45" [Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src40.ximg exists [Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src40.csv [Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src40_1.ximg exists [Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src40.csv [Mon May 28 20:33:14 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src40_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src40.ximg exists [Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists [Mon May 28 20:33:15 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly [Mon May 28 22:42:14 2012] Spatial fit model total counts = 1337.000000, observed total counts = 1337.000000 [Mon May 28 22:42:14 2012] Offset between fit and detection position for source 34 = 1.113274 pixels [Mon May 28 22:42:14 2012] 1254.634500 total counts/ 1183.030000 bgd. counts: snr = 2.081816 Spatial fit parameters: Offset between fit and detection position for source 34 = 1.113274 pixels Position = (327.1, 292.8) = 18 52 25.53 0 41 11.2 Extent = 9.7 (4.4-14.9)", rotation angle = 0 Source counts = 71.6 +/- 35.4 Background counts = 1183.0 Rate = 0.003 +/- 0.001 [Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000 [Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 28 22:42:14 2012] Assessing source extent using major axis lower bound [Mon May 28 22:42:14 2012] Source does appear to be extended [Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 28 22:42:14 2012] Source is confused with source 25 [Mon May 28 22:42:14 2012] Source is confused with source 32 [Mon May 28 23:14:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 28 23:14:00 2012] Initial guess for spatial extent in simple fitting = 9.65" [Mon May 28 23:14:00 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.217 [Mon May 28 23:14:00 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 9.65" [Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src36.ximg exists [Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src36_1.ximg exists [Tue May 29 02:09:30 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src36 appears to have run properly [Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src36.ximg exists [Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists [Tue May 29 02:09:31 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly [Tue May 29 04:26:19 2012] Warning, spatial fit 36 centroid is now closest to src. 21 [Tue May 29 04:26:19 2012] Source 34 is offset by 0.848310 and -1.976117 pixels which is larger than 2 X fitted extent = 1.653439 x 1.653439, not incorporating fit results [Tue May 29 04:26:19 2012] Vigneting correction estimate = 1.000000 [Tue May 29 04:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 29 04:26:19 2012] Assessing source extent using major axis lower bound [Tue May 29 04:26:19 2012] Source does appear to be extended [Tue May 29 04:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 29 05:46:57 2012] XMMSAS src. selection expression = ellipse(28407.095000, 25424.785800, 579.191417, 579.191417, 0.000000, X, Y) [Tue May 29 05:46:57 2012] Writing source region out to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src34_src.reg [Tue May 29 05:46:57 2012] Extracting stamp from image fullrun_mos1_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (294, 260) - (360, 326) [Tue May 29 05:46:57 2012] XMMSAS bgd. selection expression = annulus(28407.095000, 25424.785800, 965.319028, 1930.638056, X, Y) && !ellipse(24729.176000, 21601.169400, 2745.200079, 1186.096034, 332.279000, X, Y) && !ellipse(25850.438000, 22115.258000, 1385.432040, 1385.432040, 0.000000, X, Y) && !ellipse(27160.374000, 26573.186000, 1401.440040, 1401.440040, 0.000000, X, Y) && !ellipse(26481.978000, 23645.576000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(27599.825920, 25865.984880, 700.720020, 700.720020, 0.000000, X, Y) && !ellipse(26891.086800, 24286.720000, 1147.328033, 1147.328033, 0.000000, X, Y) && !ellipse(25755.989929, 24915.030640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.851200, 23245.204000, 1195.832034, 1195.832034, 0.000000, X, Y) && !ellipse(27563.550000, 25870.808000, 849.032024, 849.032024, 0.000000, X, Y) && !ellipse(25940.012000, 25080.564000, 1071.872031, 1071.872031, 0.000000, X, Y) && !ellipse(26059.674835, 24493.279236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27232.802000, 24596.936000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(27051.042800, 27401.680000, 1938.000056, 1938.000056, 0.000000, X, Y) && !ellipse(25622.227200, 25747.814000, 1456.184042, 1456.184042, 202.730000, X, Y) && !ellipse(28157.392242, 25952.876282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28588.774000, 27173.560000, 1196.840034, 1196.840034, 0.000000, X, Y) && !ellipse(27850.514000, 25502.668000, 1698.064049, 1698.064049, 0.000000, X, Y) && !ellipse(28350.946000, 24774.314000, 1162.368033, 1162.368033, 0.000000, X, Y) [Tue May 29 05:46:57 2012] Writing fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src34.gif [Tue May 29 06:05:23 2012] Mean detx,y = (-1291.80, -3845.28) [Tue May 29 06:05:23 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 29 06:05:29 2012] Binned source spectrum to 10 counts/bin [Tue May 29 06:05:29 2012] Setting source spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src34_src_b10.pi.gz [Tue May 29 06:05:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src34_bgd.pi.gz [Tue May 29 22:00:42 2012] Not generating rmf since there are only 71 counts [Tue May 29 22:00:42 2012] rmf not generated due to insufficient counts [Wed May 30 03:02:45 2012] Updating aperture counts using extracted products [Wed May 30 03:02:45 2012] Error reading totcts from fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src34_src_b10.pi.gz [Wed May 30 03:02:46 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 30 03:02:46 2012] Using photon index=1.80, rate=0.00258, arf fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src34.arf [Wed May 30 03:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 30 03:02:46 2012] Updating source flux to 3.1e-14 [Wed May 30 03:02:49 2012] Flag b found in src. 34 procflags, skipping spectral fitting [Wed May 30 03:02:49 2012] Flag c found in src. 34 procflags, skipping spectral fitting [Wed May 30 03:02:49 2012] Source 34 has fewer than 100.000000 counts, skipping spectral fitting