[Mon May 28 17:06:40 2012] Detection parameters:
  Position = (318.1, 297.9) = 18 52 28.12 0 41 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 247.4 +/- 25.4
  Background counts = 104.5
  Rate = 0.009 +/- 0.0009

[Mon May 28 17:06:41 2012] Off-axis axis estimate = 1.43'
[Mon May 28 17:47:51 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Mon May 28 17:47:51 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Mon May 28 17:47:51 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.14"
[Mon May 28 20:33:13 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src21.ximg exists
[Mon May 28 20:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src21.csv
[Mon May 28 20:33:13 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon May 28 20:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src21.csv
[Mon May 28 20:33:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon May 28 20:33:15 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon May 28 22:42:14 2012] Spatial fit model total counts = 1882.890000, observed total counts = 1881.000000
[Mon May 28 22:42:14 2012] Offset between fit and detection position for source 26 = 0.355464 pixels
[Mon May 28 22:42:14 2012] 1768.410000 total counts/ 1644.780000 bgd. counts: snr = 3.048386
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.355464 pixels
  Position = (317.8, 297.9) = 18 52 28.23 0 41 33.2
  Extent = 8.8 (5.5-14.3)", rotation angle = 0
  Source counts = 123.6 +/- 42.1
  Background counts = 1644.8
  Rate = 0.004 +/- 0.002
[Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:14 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:42:14 2012] Source does appear to be extended
[Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:14 2012] Source is confused with source 27
[Mon May 28 22:42:14 2012] Source is confused with source 25
[Mon May 28 22:42:14 2012] Source is confused with source 32
[Mon May 28 23:14:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 23:14:00 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Mon May 28 23:14:00 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Mon May 28 23:14:00 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 8.76"
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src18.ximg exists
[Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src18.csv
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src18.csv
[Tue May 29 02:09:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue May 29 02:09:30 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue May 29 04:26:19 2012] Warning, spatial fit 18 centroid is now closest to src. 23
[Tue May 29 04:26:19 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:19 2012] Assessing source extent using major axis lower bound
[Tue May 29 04:26:19 2012] Source does appear to be extended
[Tue May 29 04:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 05:46:56 2012] XMMSAS src. selection expression = ellipse(27599.825920, 25865.984880, 525.540015, 525.540015, 0.000000, X, Y)
[Tue May 29 05:46:56 2012] Writing source region out to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src26_src.reg
[Tue May 29 05:46:56 2012] Extracting stamp from image fullrun_mos1_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (288, 268) - (348, 328)
[Tue May 29 05:46:56 2012] XMMSAS bgd. selection expression = annulus(27599.825920, 25865.984880, 875.900025, 1751.800050, X, Y) && !ellipse(24729.176000, 21601.169400, 2745.200079, 1186.096034, 332.279000, X, Y) && !ellipse(23168.098000, 21442.994000, 2731.488079, 2731.488079, 0.000000, X, Y) && !ellipse(25636.324460, 23816.547000, 673.826419, 673.826419, 0.000000, X, Y) && !ellipse(27160.374000, 26573.186000, 1401.440040, 1401.440040, 0.000000, X, Y) && !ellipse(26481.978000, 23645.576000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(25189.708000, 23620.190000, 1227.376035, 1227.376035, 0.000000, X, Y) && !ellipse(25750.384000, 23803.447900, 716.985621, 716.985621, 0.000000, X, Y) && !ellipse(26891.086800, 24286.720000, 1147.328033, 1147.328033, 0.000000, X, Y) && !ellipse(25755.989929, 24915.030640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.851200, 23245.204000, 1195.832034, 1195.832034, 0.000000, X, Y) && !ellipse(27563.550000, 25870.808000, 849.032024, 849.032024, 0.000000, X, Y) && !ellipse(25940.012000, 25080.564000, 1071.872031, 1071.872031, 0.000000, X, Y) && !ellipse(26059.674835, 24493.279236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28407.095000, 25424.785800, 772.255222, 772.255222, 0.000000, X, Y) && !ellipse(27232.802000, 24596.936000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(27051.042800, 27401.680000, 1938.000056, 1938.000056, 0.000000, X, Y) && !ellipse(25622.227200, 25747.814000, 1456.184042, 1456.184042, 202.730000, X, Y) && !ellipse(28157.392242, 25952.876282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28588.774000, 27173.560000, 1196.840034, 1196.840034, 0.000000, X, Y) && !ellipse(27850.514000, 25502.668000, 1698.064049, 1698.064049, 0.000000, X, Y) && !ellipse(28350.946000, 24774.314000, 1162.368033, 1162.368033, 0.000000, X, Y)
[Tue May 29 05:46:56 2012] Writing fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src26.gif
[Tue May 29 06:01:51 2012] Mean detx,y = (-1596.54, -3004.19) 
[Tue May 29 06:01:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 06:01:57 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 06:01:57 2012] Setting source spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue May 29 06:01:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed May 30 03:02:45 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:45 2012] Error reading totcts from fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed May 30 03:02:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:45 2012] Using photon index=1.80, rate=0.00445, arf fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src26.arf
[Wed May 30 03:02:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:46 2012] Updating source flux to 5.1e-14
[Wed May 30 03:02:49 2012] Flag c found in src. 26 procflags, skipping spectral fitting