[Mon May 28 17:06:40 2012] Detection parameters: Position = (312.0, 305.9) = 18 52 29.90 0 42 8.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 308.4 +/- 27.7 Background counts = 110.7 Rate = 0.01 +/- 0.001 [Mon May 28 17:06:41 2012] Off-axis axis estimate = 1.13' [Mon May 28 17:47:51 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting [Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 6.99" [Mon May 28 17:47:51 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901 [Mon May 28 17:47:51 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 6.99" [Mon May 28 20:33:13 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src16.ximg exists [Mon May 28 20:33:13 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src16_1.ximg exists [Mon May 28 20:33:13 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src16 appears to have run properly [Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src16.ximg exists [Mon May 28 20:33:15 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists [Mon May 28 20:33:15 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly [Mon May 28 22:42:14 2012] Spatial fit model total counts = 1881.060000, observed total counts = 1881.000000 [Mon May 28 22:42:14 2012] Offset between fit and detection position for source 23 = 0.674504 pixels [Mon May 28 22:42:14 2012] 1818.857000 total counts/ 1556.780000 bgd. counts: snr = 6.642251 Spatial fit parameters: Offset between fit and detection position for source 23 = 0.674504 pixels Position = (312.6, 306.2) = 18 52 29.72 0 42 9.4 Extent = 12.1 (8.7-14.0)", rotation angle = 0 Source counts = 262.1 +/- 42.6 Background counts = 1556.8 Rate = 0.009 +/- 0.002 [Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000 [Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 28 22:42:14 2012] Assessing source extent using major axis lower bound [Mon May 28 22:42:14 2012] Source does appear to be extended [Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 28 22:42:14 2012] Source is confused with source 17 [Mon May 28 23:14:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 28 23:14:00 2012] Initial guess for spatial extent in simple fitting = 12.13" [Mon May 28 23:14:00 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.970 [Mon May 28 23:14:00 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.13" [Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src13.ximg exists [Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src13.csv [Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src13_1.ximg exists [Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src13.csv [Tue May 29 02:09:30 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Tue May 29 02:09:30 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Tue May 29 04:26:19 2012] Warning, spatial fit 13 centroid is now closest to src. 17 [Tue May 29 04:26:19 2012] Spatial fit model total counts = 1924.230000, observed total counts = 1927.000000 [Tue May 29 04:26:19 2012] Offset between fit and detection position for source 23 = 0.223094 pixels [Tue May 29 04:26:19 2012] Warning, changing simple spatial fit ID from 13 to 18 [Tue May 29 04:26:19 2012] 1711.633000 total counts/ 1526.250000 bgd. counts: snr = 4.745228 Spatial fit parameters: Offset between fit and detection position for source 23 = 0.223094 pixels Position = (312.7, 306.0) = 18 52 29.69 0 42 8.6 Extent = 17.5 (17.5-35.0)", rotation angle = 0 Source counts = 185.4 +/- 41.4 Background counts = 1526.2 Rate = 0.007 +/- 0.001 [Tue May 29 04:26:19 2012] Vigneting correction estimate = 1.000000 [Tue May 29 04:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 29 04:26:19 2012] Assessing source extent using major axis lower bound [Tue May 29 04:26:19 2012] Source does appear to be extended [Tue May 29 04:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 29 05:46:56 2012] XMMSAS src. selection expression = ellipse(27160.374000, 26573.186000, 1051.080030, 1051.080030, 0.000000, X, Y) [Tue May 29 05:46:56 2012] Writing source region out to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src23_src.reg [Tue May 29 05:46:56 2012] Extracting stamp from image fullrun_mos1_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (252, 246) - (373, 366) [Tue May 29 05:46:56 2012] XMMSAS bgd. selection expression = annulus(27160.374000, 26573.186000, 1751.800050, 3503.600101, X, Y) && !ellipse(24545.404000, 24481.674000, 271.328008, 271.328008, 0.000000, X, Y) && !ellipse(22701.218000, 21919.996000, 1385.320040, 1385.320040, 0.000000, X, Y) && !ellipse(24729.176000, 21601.169400, 2745.200079, 1186.096034, 332.279000, X, Y) && !ellipse(23168.098000, 21442.994000, 2731.488079, 2731.488079, 0.000000, X, Y) && !ellipse(25850.438000, 22115.258000, 1385.432040, 1385.432040, 0.000000, X, Y) && !ellipse(22700.238000, 22427.446000, 1307.088038, 1307.088038, 0.000000, X, Y) && !ellipse(25636.324460, 23816.547000, 673.826419, 673.826419, 0.000000, X, Y) && !ellipse(23671.076000, 23299.327000, 1303.120037, 1303.120037, 0.000000, X, Y) && !ellipse(23955.986000, 23312.762000, 1308.520038, 1308.520038, 0.000000, X, Y) && !ellipse(26481.978000, 23645.576000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(27599.825920, 25865.984880, 700.720020, 700.720020, 0.000000, X, Y) && !ellipse(25189.708000, 23620.190000, 1227.376035, 1227.376035, 0.000000, X, Y) && !ellipse(25582.791748, 22952.010834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25750.384000, 23803.447900, 716.985621, 716.985621, 0.000000, X, Y) && !ellipse(26891.086800, 24286.720000, 1147.328033, 1147.328033, 0.000000, X, Y) && !ellipse(25755.989929, 24915.030640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.851200, 23245.204000, 1195.832034, 1195.832034, 0.000000, X, Y) && !ellipse(24521.357000, 27000.932400, 1151.184033, 669.616819, 342.882000, X, Y) && !ellipse(27563.550000, 25870.808000, 849.032024, 849.032024, 0.000000, X, Y) && !ellipse(25940.012000, 25080.564000, 1071.872031, 1071.872031, 0.000000, X, Y) && !ellipse(23362.188965, 22581.658142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23802.026428, 22698.588287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.674835, 24493.279236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28407.095000, 25424.785800, 772.255222, 772.255222, 0.000000, X, Y) && !ellipse(27232.802000, 24596.936000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(24631.194000, 24631.194000, 1100.608032, 1100.608032, 0.000000, X, Y) && !ellipse(27051.042800, 27401.680000, 1938.000056, 1938.000056, 0.000000, X, Y) && !ellipse(25622.227200, 25747.814000, 1456.184042, 1456.184042, 202.730000, X, Y) && !ellipse(28157.392242, 25952.876282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28588.774000, 27173.560000, 1196.840034, 1196.840034, 0.000000, X, Y) && !ellipse(27850.514000, 25502.668000, 1698.064049, 1698.064049, 0.000000, X, Y) && !ellipse(28350.946000, 24774.314000, 1162.368033, 1162.368033, 0.000000, X, Y) [Tue May 29 05:46:56 2012] Writing fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src23.gif [Tue May 29 06:01:02 2012] Mean detx,y = (-2134.65, -2492.73) [Tue May 29 06:01:03 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 29 06:01:11 2012] Binned source spectrum to 10 counts/bin [Tue May 29 06:01:11 2012] Setting source spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Tue May 29 06:01:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src23_bgd.pi.gz [Wed May 30 03:02:45 2012] Updating aperture counts using extracted products [Wed May 30 03:02:45 2012] Error reading totcts from fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Wed May 30 03:02:45 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 30 03:02:45 2012] Using photon index=1.80, rate=0.00667, arf fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src23.arf [Wed May 30 03:02:45 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 30 03:02:45 2012] Updating source flux to 6.8e-14 [Wed May 30 03:02:49 2012] Flag c found in src. 23 procflags, skipping spectral fitting