[Mon May 28 17:06:40 2012] Detection parameters:
  Position = (326.1, 307.3) = 18 52 25.82 0 42 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.3 +/- 17.4
  Background counts = 90.5
  Rate = 0.003 +/- 0.0007

[Mon May 28 17:06:41 2012] Off-axis axis estimate = 2.10'
[Mon May 28 17:47:51 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Mon May 28 17:47:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.812
[Mon May 28 17:47:51 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 7.48"
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src58.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src58.csv
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src58_1.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src58.csv
[Mon May 28 20:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:33:16 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Mon May 28 20:33:16 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Mon May 28 20:33:16 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Mon May 28 22:42:14 2012] Spatial fit model total counts = 1013.250000, observed total counts = 1007.000000
[Mon May 28 22:42:14 2012] Offset between fit and detection position for source 21 = 6.432745 pixels
[Mon May 28 22:42:14 2012] 931.663000 total counts/ 756.829000 bgd. counts: snr = 6.355168
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 6.432745 pixels
  Position = (329.2, 312.9) = 18 52 24.93 0 42 38.6
  Extent = 15.0 (14.9-29.9)", rotation angle = 0
  Source counts = 174.8 +/- 30.5
  Background counts = 756.8
  Rate = 0.006 +/- 0.001
[Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:14 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:42:14 2012] Source does appear to be extended
[Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 23:14:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 23:14:00 2012] Initial guess for spatial extent in simple fitting = 14.96"
[Mon May 28 23:14:00 2012] source mask rpix=3.4, npix_max = 62, mask sum = 64, frac = 1.031
[Mon May 28 23:14:00 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 14.96"
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src51.ximg exists
[Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src51.csv
[Tue May 29 02:09:30 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src51_1.ximg exists
[Tue May 29 02:09:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src51.csv
[Tue May 29 02:09:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Tue May 29 02:09:31 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Tue May 29 02:09:31 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Tue May 29 04:26:19 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.061175 pixels away
[Tue May 29 04:26:19 2012] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.347902 pixels away
[Tue May 29 04:26:19 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:26:19 2012] Assessing source extent using major axis lower bound
[Tue May 29 04:26:19 2012] Source does appear to be extended
[Tue May 29 04:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 05:46:58 2012] XMMSAS src. selection expression = ellipse(28588.774000, 27173.560000, 897.630026, 897.630026, 0.000000, X, Y)
[Tue May 29 05:46:58 2012] Writing source region out to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src21_src.reg
[Tue May 29 05:46:58 2012] Extracting stamp from image fullrun_mos1_xmm0550671901_pi300-10000_cl_sm2.00.img.gz, (278, 261) - (381, 364)
[Tue May 29 05:46:58 2012] XMMSAS bgd. selection expression = annulus(28588.774000, 27173.560000, 1496.050043, 2992.100086, X, Y) && !ellipse(24729.176000, 21601.169400, 2745.200079, 1186.096034, 332.279000, X, Y) && !ellipse(25636.324460, 23816.547000, 673.826419, 673.826419, 0.000000, X, Y) && !ellipse(27160.374000, 26573.186000, 1401.440040, 1401.440040, 0.000000, X, Y) && !ellipse(26481.978000, 23645.576000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(27599.825920, 25865.984880, 700.720020, 700.720020, 0.000000, X, Y) && !ellipse(25189.708000, 23620.190000, 1227.376035, 1227.376035, 0.000000, X, Y) && !ellipse(25750.384000, 23803.447900, 716.985621, 716.985621, 0.000000, X, Y) && !ellipse(26891.086800, 24286.720000, 1147.328033, 1147.328033, 0.000000, X, Y) && !ellipse(25755.989929, 24915.030640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.851200, 23245.204000, 1195.832034, 1195.832034, 0.000000, X, Y) && !ellipse(24521.357000, 27000.932400, 1151.184033, 669.616819, 342.882000, X, Y) && !ellipse(27563.550000, 25870.808000, 849.032024, 849.032024, 0.000000, X, Y) && !ellipse(25940.012000, 25080.564000, 1071.872031, 1071.872031, 0.000000, X, Y) && !ellipse(26059.674835, 24493.279236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28407.095000, 25424.785800, 772.255222, 772.255222, 0.000000, X, Y) && !ellipse(27232.802000, 24596.936000, 1157.848033, 1157.848033, 0.000000, X, Y) && !ellipse(24631.194000, 24631.194000, 1100.608032, 1100.608032, 0.000000, X, Y) && !ellipse(32200.635468, 28237.648468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27051.042800, 27401.680000, 1938.000056, 1938.000056, 0.000000, X, Y) && !ellipse(25622.227200, 25747.814000, 1456.184042, 1456.184042, 202.730000, X, Y) && !ellipse(28157.392242, 25952.876282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27850.514000, 25502.668000, 1698.064049, 1698.064049, 0.000000, X, Y) && !ellipse(28350.946000, 24774.314000, 1162.368033, 1162.368033, 0.000000, X, Y)
[Tue May 29 05:46:58 2012] Writing fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src21.gif
[Tue May 29 06:08:30 2012] Mean detx,y = (-2925.92, -3740.26) 
[Tue May 29 06:08:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 06:08:40 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 06:08:40 2012] Setting source spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue May 29 06:08:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed May 30 03:02:45 2012] Updating aperture counts using extracted products
[Wed May 30 03:02:45 2012] Error reading totcts from fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed May 30 03:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 03:02:46 2012] Using photon index=1.80, rate=0.00629, arf fullrun_mos1_xmm0550671901_pi300-10000_pass1_cl_src21.arf
[Wed May 30 03:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 03:02:46 2012] Updating source flux to 7.1e-14