[Mon May 28 17:06:40 2012] Detection parameters:
  Position = (461.4, 216.0) = 18 51 46.58 0 35 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.5 +/- 16.9
  Background counts = 36.1
  Rate = 0.004 +/- 0.0005

[Mon May 28 17:06:41 2012] Off-axis axis estimate = 13.24'
[Mon May 28 17:47:51 2012] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:47:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 17:47:51 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Mon May 28 17:47:51 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.000
[Mon May 28 17:47:51 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 13.05"
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src44.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src44.csv
[Mon May 28 20:33:14 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src44_1.ximg exists
[Mon May 28 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src44.csv
[Mon May 28 20:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:33:16 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Mon May 28 20:33:16 2012] fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Mon May 28 20:33:16 2012] Fit fullrun_mos1_xmm0550671901_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Mon May 28 22:42:14 2012] Spatial fit model total counts = 455.819000, observed total counts = 456.000000
[Mon May 28 22:42:14 2012] Offset between fit and detection position for source 12 = 0.264950 pixels
[Mon May 28 22:42:14 2012] 453.833500 total counts/ 397.277000 bgd. counts: snr = 2.837500
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.264950 pixels
  Position = (461.1, 216.0) = 18 51 46.66 0 35 37.0
  Extent = 5.4 (4.2-7.2)", rotation angle = 0
  Source counts = 56.6 +/- 21.3
  Background counts = 397.3
  Rate = 0.002 +/- 0.0008
[Mon May 28 22:42:14 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:42:14 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:42:14 2012] Source does appear to be extended
[Mon May 28 22:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:42:14 2012] Deleting source due to low Poisson probability 0.9