[Fri Jun  8 18:46:05 2012] Detection parameters:
  Position = (282.0, 311.2) = 18 52 38.24 0 42 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 682.3 +/- 40.2
  Background counts = 169.3
  Rate = 0.04 +/- 0.002

[Fri Jun  8 18:46:05 2012] Off-axis axis estimate = 1.50'
[Fri Jun  8 18:54:59 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 18:54:59 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Fri Jun  8 18:54:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Fri Jun  8 18:54:59 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.18"
[Fri Jun  8 20:02:41 2012] fullrun_pn_xmm0550671801_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun  8 20:02:41 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550671801_pi300-10000_cl_pass0_src5.csv
[Fri Jun  8 20:02:41 2012] fullrun_pn_xmm0550671801_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun  8 20:02:41 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550671801_pi300-10000_cl_pass0_src5.csv
[Fri Jun  8 20:02:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550671801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550671801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 20:02:42 2012] fullrun_pn_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun  8 20:02:42 2012] fullrun_pn_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun  8 20:02:42 2012] Fit fullrun_pn_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun  9 03:16:33 2012] Spatial fit model total counts = 3151.290000, observed total counts = 3147.000000
[Sat Jun  9 03:16:33 2012] Offset between fit and detection position for source 5 = 0.433515 pixels
[Sat Jun  9 03:16:33 2012] 3145.467000 total counts/ 2159.120000 bgd. counts: snr = 21.227133
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.433515 pixels
  Position = (281.7, 311.4) = 18 52 38.34 0 42 26.1
  Extent = 13.0 (11.0-14.4)", rotation angle = 0
  Source counts = 986.3 +/- 56.1
  Background counts = 2159.1
  Rate = 0.03 +/- 0.002
[Sat Jun  9 03:16:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 03:16:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 03:16:33 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 03:16:33 2012] Source does appear to be extended
[Sat Jun  9 03:16:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 03:17:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 03:17:12 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Sat Jun  9 03:17:12 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Sat Jun  9 03:17:12 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.95"
[Sat Jun  9 04:15:45 2012] fullrun_pn_xmm0550671801_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun  9 04:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671801_pi300-10000_cl_pass1_src5.csv
[Sat Jun  9 04:15:45 2012] fullrun_pn_xmm0550671801_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun  9 04:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671801_pi300-10000_cl_pass1_src5.csv
[Sat Jun  9 04:15:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550671801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550671801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 04:15:46 2012] fullrun_pn_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun  9 04:15:46 2012] fullrun_pn_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun  9 04:15:46 2012] Fit fullrun_pn_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun  9 12:31:57 2012] Warning, spatial fit 5 centroid is now closest to src. 10
[Sat Jun  9 12:31:57 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:31:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:31:57 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 12:31:57 2012] Source does appear to be extended
[Sat Jun  9 12:31:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 12:32:51 2012] XMMSAS src. selection expression = ellipse(24460.238400, 27046.240000, 777.210022, 777.210022, 0.000000, X, Y)
[Sat Jun  9 12:32:51 2012] Writing source region out to fullrun_pn_xmm0550671801_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun  9 12:32:51 2012] Extracting stamp from image fullrun_pn_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (237, 267) - (326, 356)
[Sat Jun  9 12:32:51 2012] XMMSAS bgd. selection expression = annulus(24460.238400, 27046.240000, 1295.350037, 2590.700075, X, Y) && !ellipse(24407.477600, 24493.815000, 382.837611, 382.837611, 0.000000, X, Y) && !ellipse(25924.584000, 25171.288000, 1064.424031, 1064.424031, 0.000000, X, Y) && !ellipse(24898.994263, 24559.607178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25520.539276, 23958.001434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.475128, 26833.528259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22061.375946, 25867.564880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26723.262238, 26222.802490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25335.037689, 26304.418091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26353.955627, 25604.055878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23107.978000, 25485.502000, 1189.040034, 1189.040034, 0.000000, X, Y) && !ellipse(21622.631027, 24994.785065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26359.902893, 24481.578522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22137.973541, 24489.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23311.501801, 24172.302124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26218.687195, 23788.568085, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 12:32:51 2012] Writing fullrun_pn_xmm0550671801_pi300-10000_pass1_cl_src5.gif
[Sat Jun  9 12:59:45 2012] Mean detx,y = (571.16, 2219.37) 
[Sat Jun  9 13:00:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 13:00:27 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 13:00:27 2012] Setting source spectrum file to fullrun_pn_xmm0550671801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun  9 13:00:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550671801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 10 03:59:16 2012] Updating aperture counts using extracted products
[Sun Jun 10 03:59:16 2012] Error reading totcts from fullrun_pn_xmm0550671801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 10 03:59:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 03:59:17 2012] Using photon index=1.80, rate=0.0347, arf fullrun_pn_xmm0550671801_pi300-10000_pass1_cl_src5.arf
[Sun Jun 10 03:59:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 03:59:17 2012] Updating source flux to 8.7e-14