[Fri Jun  8 18:47:14 2012] Detection parameters:
  Position = (253.0, 185.1) = 18 52 46.68 0 33 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 611.6 +/- 30.2
  Background counts = 14.0
  Rate = 0.04 +/- 0.002

[Fri Jun  8 18:47:16 2012] Off-axis axis estimate = 8.86'
[Fri Jun  8 23:46:43 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 23:46:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 23:46:43 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Fri Jun  8 23:46:43 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.003
[Fri Jun  8 23:46:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.86"
[Sat Jun  9 03:16:25 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  9 03:16:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 03:16:25 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  9 03:16:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 03:16:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 03:16:26 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  9 03:16:26 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  9 03:16:26 2012] Fit fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  9 03:16:59 2012] Spatial fit model total counts = 828.820000, observed total counts = 826.000000
[Sat Jun  9 03:16:59 2012] Offset between fit and detection position for source 2 = 0.252831 pixels
[Sat Jun  9 03:16:59 2012] 832.013000 total counts/ 343.482000 bgd. counts: snr = 26.359680
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.252831 pixels
  Position = (253.0, 185.3) = 18 52 46.68 0 33 17.5
  Extent = 6.5 (6.0-6.9)", rotation angle = 0
  Source counts = 488.5 +/- 28.8
  Background counts = 343.5
  Rate = 0.02 +/- 0.001
[Sat Jun  9 03:16:59 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 03:16:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 03:16:59 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 03:16:59 2012] Source does appear to be extended
[Sat Jun  9 03:16:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 07:47:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 07:47:34 2012] Initial guess for spatial extent in simple fitting = 6.48"
[Sat Jun  9 07:47:34 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.011
[Sat Jun  9 07:47:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.48"
[Sat Jun  9 12:31:45 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  9 12:31:45 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  9 12:31:45 2012] Fit fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jun  9 12:31:47 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  9 12:31:47 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  9 12:31:47 2012] Fit fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  9 12:32:31 2012] Spatial fit model total counts = 721.351000, observed total counts = 720.000000
[Sat Jun  9 12:32:31 2012] Offset between fit and detection position for source 2 = 0.016440 pixels
[Sat Jun  9 12:32:31 2012] 726.947000 total counts/ 244.829000 bgd. counts: snr = 30.812144
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016440 pixels
  Position = (253.0, 185.3) = 18 52 46.68 0 33 17.4
  Extent = 6.4 (5.9-6.8)", rotation angle = 0
  Source counts = 482.1 +/- 27.0
  Background counts = 244.8
  Rate = 0.02 +/- 0.0009
[Sat Jun  9 12:32:31 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:32:31 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 12:32:31 2012] Source does appear to be extended
[Sat Jun  9 12:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 21:00:36 2012] XMMSAS src. selection expression = ellipse(21959.485680, 16071.890600, 384.576611, 384.576611, 0.000000, X, Y)
[Sat Jun  9 21:00:36 2012] Writing source region out to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun  9 21:00:36 2012] Extracting stamp from image fullrun_mos2_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (231, 163) - (275, 207)
[Sat Jun  9 21:00:36 2012] XMMSAS bgd. selection expression = annulus(21959.485680, 16071.890600, 640.961018, 1281.922037, X, Y)
[Sat Jun  9 21:00:36 2012] Writing fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src2.gif
[Sat Jun  9 21:01:09 2012] Mean detx,y = (-339.73, 8865.49) 
[Sat Jun  9 21:01:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 21:01:33 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 21:01:33 2012] Setting source spectrum file to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  9 21:01:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 10 03:59:24 2012] Updating aperture counts using extracted products
[Sun Jun 10 03:59:24 2012] Error reading totcts from fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 10 03:59:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 03:59:27 2012] Using photon index=1.80, rate=0.0168, arf fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src2.arf
[Sun Jun 10 03:59:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 03:59:27 2012] Updating source flux to 3.5e-13
[Sun Jun 10 04:20:08 2012] Reading fit data from xmm0550671801/analysis//spectral/fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jun 10 04:20:08 2012] Spectral fit parameter nH value = 2.63442e+22
[Sun Jun 10 04:20:08 2012] Spectral fit parameter PhoIndex value = 3.20367
[Sun Jun 10 04:20:08 2012] Failed to get F(0.3-8.0) from xmm0550671801/analysis//spectral/fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jun 10 04:20:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 04:20:08 2012] Using Nh = 2.6e+22, photon index=3.20, rate=0.0168, arf fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src2.arf
[Sun Jun 10 04:20:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 04:20:09 2012] Updating source flux to 5.1e-13