[Fri Jun  8 18:47:15 2012] Detection parameters:
  Position = (298.0, 288.0) = 18 52 33.62 0 40 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.6 +/- 27.2
  Background counts = 109.6
  Rate = 0.01 +/- 0.001

[Fri Jun  8 18:47:16 2012] Off-axis axis estimate = 0.76'
[Fri Jun  8 23:46:43 2012] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 23:46:43 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Fri Jun  8 23:46:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.938
[Fri Jun  8 23:46:43 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 6.81"
[Sat Jun  9 03:16:26 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun  9 03:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src19.csv
[Sat Jun  9 03:16:26 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun  9 03:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src19.csv
[Sat Jun  9 03:16:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 03:16:27 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun  9 03:16:27 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun  9 03:16:27 2012] Fit fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Jun  9 03:16:59 2012] Spatial fit model total counts = 2266.700000, observed total counts = 2260.000000
[Sat Jun  9 03:16:59 2012] Offset between fit and detection position for source 19 = 0.850536 pixels
[Sat Jun  9 03:16:59 2012] 2233.943000 total counts/ 2068.190000 bgd. counts: snr = 3.644737
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.850536 pixels
  Position = (297.3, 288.6) = 18 52 33.82 0 40 46.6
  Extent = 9.4 (6.3-13.2)", rotation angle = 0
  Source counts = 165.8 +/- 47.3
  Background counts = 2068.2
  Rate = 0.006 +/- 0.002
[Sat Jun  9 03:16:59 2012] Spatial fit model total counts = 1928.440000, observed total counts = 1928.000000
[Sat Jun  9 03:16:59 2012] Offset between fit and detection position for source 19 = 0.101906 pixels
[Sat Jun  9 03:16:59 2012] Warning, changing simple spatial fit ID from 19 to 26
[Sat Jun  9 03:16:59 2012] 1929.264000 total counts/ 1557.720000 bgd. counts: snr = 9.413813
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.101906 pixels
  Position = (297.4, 288.5) = 18 52 33.80 0 40 46.3
  Extent = 13.3 (13.3-26.6)", rotation angle = 0
  Source counts = 371.5 +/- 43.9
  Background counts = 1557.7
  Rate = 0.01 +/- 0.002
[Sat Jun  9 03:16:59 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 03:16:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 03:16:59 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 03:16:59 2012] Source does appear to be extended
[Sat Jun  9 03:16:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 03:16:59 2012] Source is confused with source 37
[Sat Jun  9 03:16:59 2012] Source is confused with source 45
[Sat Jun  9 07:47:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 07:47:34 2012] Initial guess for spatial extent in simple fitting = 13.29"
[Sat Jun  9 07:47:34 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Sat Jun  9 07:47:34 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 13.29"
[Sat Jun  9 12:31:46 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src19.ximg exists
[Sat Jun  9 12:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src19.csv
[Sat Jun  9 12:31:46 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Jun  9 12:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src19.csv
[Sat Jun  9 12:31:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 12:31:47 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Jun  9 12:31:47 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Jun  9 12:31:47 2012] Fit fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Jun  9 12:32:31 2012] Warning, spatial fit 19 centroid is now closest to src. 40
[Sat Jun  9 12:32:31 2012] Spatial fit model total counts = 1929.720000, observed total counts = 1928.000000
[Sat Jun  9 12:32:31 2012] Offset between fit and detection position for source 19 = 0.057303 pixels
[Sat Jun  9 12:32:31 2012] Warning, changing simple spatial fit ID from 19 to 26
[Sat Jun  9 12:32:31 2012] 1943.665000 total counts/ 1562.650000 bgd. counts: snr = 9.638539
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.057303 pixels
  Position = (297.3, 288.5) = 18 52 33.82 0 40 46.3
  Extent = 13.3 (13.3-26.6)", rotation angle = 0
  Source counts = 381.0 +/- 44.1
  Background counts = 1562.7
  Rate = 0.01 +/- 0.002
[Sat Jun  9 12:32:31 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:32:31 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 12:32:31 2012] Source does appear to be extended
[Sat Jun  9 12:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 21:00:37 2012] XMMSAS src. selection expression = ellipse(25817.166000, 25049.080000, 797.550023, 797.550023, 0.000000, X, Y)
[Sat Jun  9 21:00:37 2012] Writing source region out to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src19_src.reg
[Sat Jun  9 21:00:37 2012] Extracting stamp from image fullrun_mos2_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (251, 243) - (343, 334)
[Sat Jun  9 21:00:37 2012] XMMSAS bgd. selection expression = annulus(25817.166000, 25049.080000, 1329.250038, 2658.500076, X, Y) && !ellipse(23398.528351, 23185.741028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24432.835000, 24502.774800, 459.292013, 287.165608, 12.157400, X, Y) && !ellipse(24440.978000, 21537.504000, 1320.632038, 1320.632038, 0.000000, X, Y) && !ellipse(26381.012000, 22962.128000, 1246.400036, 1246.400036, 0.000000, X, Y) && !ellipse(22479.718400, 22112.521600, 1369.632039, 1369.632039, 0.000000, X, Y) && !ellipse(21960.148000, 22909.448000, 2252.664065, 2252.664065, 0.000000, X, Y) && !ellipse(25595.802000, 22387.384000, 2571.248074, 1123.896032, 140.788500, X, Y) && !ellipse(25835.944000, 22696.324000, 2505.984072, 2505.984072, 0.000000, X, Y) && !ellipse(22560.771300, 22494.798000, 1335.832038, 916.832026, 84.510000, X, Y) && !ellipse(26389.648200, 23767.845800, 589.992017, 589.992017, 0.000000, X, Y) && !ellipse(25491.442000, 23974.532000, 539.931216, 539.931216, 0.000000, X, Y) && !ellipse(22138.869600, 24048.786000, 1305.008038, 1305.008038, 0.000000, X, Y) && !ellipse(22767.212830, 21895.400772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24727.618000, 27002.272000, 1027.512030, 1027.512030, 0.000000, X, Y) && !ellipse(27084.491700, 26813.996200, 793.600823, 793.600823, 0.000000, X, Y) && !ellipse(24902.568000, 24328.340000, 1079.864031, 1079.864031, 0.000000, X, Y) && !ellipse(27549.142000, 25847.184000, 1180.712034, 1180.712034, 0.000000, X, Y) && !ellipse(23717.291168, 23574.323151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23223.994690, 23002.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24239.503571, 27082.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.335022, 27270.615112, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27003.007400, 26365.257400, 1109.720032, 1109.720032, 0.000000, X, Y) && !ellipse(26156.708000, 25567.774000, 883.688025, 883.688025, 0.000000, X, Y) && !ellipse(25265.725494, 26378.541199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26521.212800, 23806.134000, 1778.800051, 1778.800051, 0.000000, X, Y) && !ellipse(27100.429200, 26075.088000, 1102.832032, 1102.832032, 0.000000, X, Y) && !ellipse(25875.476868, 24382.822052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26614.198000, 24352.090000, 1136.816033, 1136.816033, 0.000000, X, Y) && !ellipse(24691.031128, 25156.364838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.856323, 25446.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21253.538000, 26337.953800, 2081.256060, 645.198419, 90.000000, X, Y) && !ellipse(28009.015930, 26727.552765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26047.289124, 26411.476837, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 21:00:37 2012] Writing fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src19.gif
[Sat Jun  9 21:53:55 2012] Mean detx,y = (1279.26, -716.97) 
[Sat Jun  9 21:53:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 21:54:22 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 21:54:22 2012] Setting source spectrum file to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jun  9 21:54:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jun 10 03:59:25 2012] Updating aperture counts using extracted products
[Sun Jun 10 03:59:25 2012] Error reading totcts from fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun 10 03:59:28 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 03:59:28 2012] Using photon index=1.80, rate=0.0133, arf fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src19.arf
[Sun Jun 10 03:59:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 03:59:28 2012] Updating source flux to 1.4e-13
[Sun Jun 10 04:09:42 2012] Flag c found in src. 19 procflags, skipping spectral fitting