[Fri Jun  8 18:47:14 2012] Detection parameters:
  Position = (316.2, 297.2) = 18 52 28.33 0 41 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.6 +/- 24.0
  Background counts = 53.5
  Rate = 0.01 +/- 0.0009

[Fri Jun  8 18:47:16 2012] Off-axis axis estimate = 1.29'
[Fri Jun  8 23:46:43 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 23:46:43 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Fri Jun  8 23:46:43 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885
[Fri Jun  8 23:46:43 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.08"
[Sat Jun  9 03:16:26 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src18.ximg exists
[Sat Jun  9 03:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src18.csv
[Sat Jun  9 03:16:26 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Jun  9 03:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src18.csv
[Sat Jun  9 03:16:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 03:16:27 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Jun  9 03:16:27 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Jun  9 03:16:27 2012] Fit fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Jun  9 03:16:59 2012] Spatial fit model total counts = 1717.340000, observed total counts = 1715.000000
[Sat Jun  9 03:16:59 2012] Offset between fit and detection position for source 18 = 0.635985 pixels
[Sat Jun  9 03:16:59 2012] 1657.762000 total counts/ 1381.130000 bgd. counts: snr = 7.443636
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.635985 pixels
  Position = (316.6, 297.7) = 18 52 28.23 0 41 26.6
  Extent = 14.2 (5.3-28.3)", rotation angle = 0
  Source counts = 276.6 +/- 40.7
  Background counts = 1381.1
  Rate = 0.01 +/- 0.001
[Sat Jun  9 03:16:59 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 03:16:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 03:16:59 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 03:16:59 2012] Source does appear to be extended
[Sat Jun  9 03:16:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 03:16:59 2012] Source is confused with source 30
[Sat Jun  9 03:16:59 2012] Source is confused with source 39
[Sat Jun  9 03:16:59 2012] Source is confused with source 32
[Sat Jun  9 03:16:59 2012] Source is confused with source 38
[Sat Jun  9 07:47:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 07:47:34 2012] Initial guess for spatial extent in simple fitting = 14.15"
[Sat Jun  9 07:47:34 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.870
[Sat Jun  9 07:47:34 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 14.15"
[Sat Jun  9 12:31:46 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src18.ximg exists
[Sat Jun  9 12:31:46 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Jun  9 12:31:46 2012] Fit fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src18 appears to have run properly
[Sat Jun  9 12:31:47 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Jun  9 12:31:47 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Jun  9 12:31:47 2012] Fit fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Jun  9 12:32:31 2012] Warning, spatial fit 18 centroid is now closest to src. 22
[Sat Jun  9 12:32:31 2012] Spatial fit model total counts = 1196.600000, observed total counts = 1200.000000
[Sat Jun  9 12:32:31 2012] Offset between fit and detection position for source 18 = 0.652887 pixels
[Sat Jun  9 12:32:31 2012] Warning, changing simple spatial fit ID from 18 to 38
[Sat Jun  9 12:32:31 2012] 1187.969000 total counts/ 996.395000 bgd. counts: snr = 6.069051
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.652887 pixels
  Position = (317.2, 297.7) = 18 52 28.04 0 41 26.2
  Extent = 14.8 (14.7-29.5)", rotation angle = 0
  Source counts = 191.6 +/- 34.5
  Background counts = 996.4
  Rate = 0.007 +/- 0.001
[Sat Jun  9 12:32:31 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:32:31 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 12:32:31 2012] Source does appear to be extended
[Sat Jun  9 12:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 21:00:37 2012] XMMSAS src. selection expression = ellipse(27549.142000, 25847.184000, 885.534025, 885.534025, 0.000000, X, Y)
[Sat Jun  9 21:00:37 2012] Writing source region out to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src18_src.reg
[Sat Jun  9 21:00:37 2012] Extracting stamp from image fullrun_mos2_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (266, 247) - (368, 349)
[Sat Jun  9 21:00:37 2012] XMMSAS bgd. selection expression = annulus(27549.142000, 25847.184000, 1475.890042, 2951.780085, X, Y) && !ellipse(24432.835000, 24502.774800, 459.292013, 287.165608, 12.157400, X, Y) && !ellipse(26381.012000, 22962.128000, 1246.400036, 1246.400036, 0.000000, X, Y) && !ellipse(25595.802000, 22387.384000, 2571.248074, 1123.896032, 140.788500, X, Y) && !ellipse(25835.944000, 22696.324000, 2505.984072, 2505.984072, 0.000000, X, Y) && !ellipse(26389.648200, 23767.845800, 589.992017, 589.992017, 0.000000, X, Y) && !ellipse(25491.442000, 23974.532000, 539.931216, 539.931216, 0.000000, X, Y) && !ellipse(24727.618000, 27002.272000, 1027.512030, 1027.512030, 0.000000, X, Y) && !ellipse(27084.491700, 26813.996200, 793.600823, 793.600823, 0.000000, X, Y) && !ellipse(24902.568000, 24328.340000, 1079.864031, 1079.864031, 0.000000, X, Y) && !ellipse(25817.166000, 25049.080000, 1063.400031, 1063.400031, 0.000000, X, Y) && !ellipse(24239.503571, 27082.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.335022, 27270.615112, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27003.007400, 26365.257400, 1109.720032, 1109.720032, 0.000000, X, Y) && !ellipse(26156.708000, 25567.774000, 883.688025, 883.688025, 0.000000, X, Y) && !ellipse(25265.725494, 26378.541199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26521.212800, 23806.134000, 1778.800051, 1778.800051, 0.000000, X, Y) && !ellipse(27100.429200, 26075.088000, 1102.832032, 1102.832032, 0.000000, X, Y) && !ellipse(25875.476868, 24382.822052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26614.198000, 24352.090000, 1136.816033, 1136.816033, 0.000000, X, Y) && !ellipse(24691.031128, 25156.364838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.856323, 25446.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.015930, 26727.552765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26047.289124, 26411.476837, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 21:00:37 2012] Writing fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src18.gif
[Sat Jun  9 21:53:31 2012] Mean detx,y = (2708.87, -1953.48) 
[Sat Jun  9 21:53:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 21:53:49 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 21:53:49 2012] Setting source spectrum file to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jun  9 21:53:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Jun 10 03:59:25 2012] Updating aperture counts using extracted products
[Sun Jun 10 03:59:25 2012] Error reading totcts from fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jun 10 03:59:28 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 03:59:28 2012] Using photon index=1.80, rate=0.00669, arf fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src18.arf
[Sun Jun 10 03:59:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 03:59:28 2012] Updating source flux to 6.6e-14
[Sun Jun 10 04:09:42 2012] Flag c found in src. 18 procflags, skipping spectral fitting