[Fri Jun  8 18:47:14 2012] Detection parameters:
  Position = (283.4, 310.9) = 18 52 37.85 0 42 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 304.5 +/- 24.9
  Background counts = 91.6
  Rate = 0.01 +/- 0.001

[Fri Jun  8 18:47:16 2012] Off-axis axis estimate = 1.41'
[Fri Jun  8 23:46:43 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 23:46:43 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Fri Jun  8 23:46:43 2012] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.709
[Fri Jun  8 23:46:43 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.14"
[Sat Jun  9 03:16:25 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src15.ximg exists
[Sat Jun  9 03:16:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src15.csv
[Sat Jun  9 03:16:25 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Jun  9 03:16:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src15.csv
[Sat Jun  9 03:16:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 03:16:27 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Jun  9 03:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Jun  9 03:16:27 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Jun  9 03:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Jun  9 03:16:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 03:16:59 2012] Spatial fit model total counts = 1684.820000, observed total counts = 1468.000000
[Sat Jun  9 03:16:59 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  9 03:16:59 2012] Spatial fit model total counts = 1396.150000, observed total counts = 1415.000000
[Sat Jun  9 03:16:59 2012] Offset between fit and detection position for source 17 = 1.373153 pixels
[Sat Jun  9 03:16:59 2012] Warning, changing simple spatial fit ID from 15 to 27
[Sat Jun  9 03:16:59 2012] 1392.943000 total counts/ 1087.000000 bgd. counts: snr = 9.279525
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.373153 pixels
  Position = (284.8, 310.9) = 18 52 37.45 0 42 23.9
  Extent = 12.7 (11.1-13.5)", rotation angle = 0
  Source counts = 305.9 +/- 37.3
  Background counts = 1087.0
  Rate = 0.01 +/- 0.001
[Sat Jun  9 03:16:59 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 03:16:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 03:16:59 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 03:16:59 2012] Source does appear to be extended
[Sat Jun  9 03:16:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 03:16:59 2012] Source is confused with source 27
[Sat Jun  9 03:16:59 2012] Source is confused with source 58
[Sat Jun  9 07:47:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 07:47:34 2012] Initial guess for spatial extent in simple fitting = 12.71"
[Sat Jun  9 07:47:34 2012] source mask rpix=2.9, npix_max = 46, mask sum = 38, frac = 0.811
[Sat Jun  9 07:47:34 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 12.71"
[Sat Jun  9 12:31:46 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jun  9 12:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src15.csv
[Sat Jun  9 12:31:46 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jun  9 12:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src15.csv
[Sat Jun  9 12:31:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 12:31:47 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jun  9 12:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jun  9 12:31:47 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jun  9 12:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jun  9 12:31:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 12:32:31 2012] Spatial fit model total counts = 1841.900000, observed total counts = 1590.000000
[Sat Jun  9 12:32:31 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  9 12:32:31 2012] Spatial fit model total counts = 1392.060000, observed total counts = 1415.000000
[Sat Jun  9 12:32:31 2012] Offset between fit and detection position for source 17 = 0.014713 pixels
[Sat Jun  9 12:32:31 2012] Warning, changing simple spatial fit ID from 15 to 27
[Sat Jun  9 12:32:31 2012] 1388.788000 total counts/ 1077.440000 bgd. counts: snr = 9.485266
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.014713 pixels
  Position = (284.8, 310.9) = 18 52 37.45 0 42 23.9
  Extent = 12.8 (11.5-13.5)", rotation angle = 0
  Source counts = 311.3 +/- 37.3
  Background counts = 1077.4
  Rate = 0.01 +/- 0.001
[Sat Jun  9 12:32:31 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:32:31 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 12:32:31 2012] Source does appear to be extended
[Sat Jun  9 12:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 21:00:37 2012] XMMSAS src. selection expression = ellipse(24727.618000, 27002.272000, 770.634022, 770.634022, 0.000000, X, Y)
[Sat Jun  9 21:00:37 2012] Writing source region out to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun  9 21:00:37 2012] Extracting stamp from image fullrun_mos2_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (240, 267) - (329, 355)
[Sat Jun  9 21:00:37 2012] XMMSAS bgd. selection expression = annulus(24727.618000, 27002.272000, 1284.390037, 2568.780074, X, Y) && !ellipse(24432.835000, 24502.774800, 459.292013, 287.165608, 12.157400, X, Y) && !ellipse(21960.148000, 22909.448000, 2252.664065, 2252.664065, 0.000000, X, Y) && !ellipse(25595.802000, 22387.384000, 2571.248074, 1123.896032, 140.788500, X, Y) && !ellipse(25835.944000, 22696.324000, 2505.984072, 2505.984072, 0.000000, X, Y) && !ellipse(25491.442000, 23974.532000, 539.931216, 539.931216, 0.000000, X, Y) && !ellipse(22138.869600, 24048.786000, 1305.008038, 1305.008038, 0.000000, X, Y) && !ellipse(27084.491700, 26813.996200, 793.600823, 793.600823, 0.000000, X, Y) && !ellipse(24902.568000, 24328.340000, 1079.864031, 1079.864031, 0.000000, X, Y) && !ellipse(27549.142000, 25847.184000, 1180.712034, 1180.712034, 0.000000, X, Y) && !ellipse(25817.166000, 25049.080000, 1063.400031, 1063.400031, 0.000000, X, Y) && !ellipse(23717.291168, 23574.323151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21367.277180, 25038.849800, 847.728024, 847.728024, 0.000000, X, Y) && !ellipse(24239.503571, 27082.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.335022, 27270.615112, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27003.007400, 26365.257400, 1109.720032, 1109.720032, 0.000000, X, Y) && !ellipse(26156.708000, 25567.774000, 883.688025, 883.688025, 0.000000, X, Y) && !ellipse(25265.725494, 26378.541199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26521.212800, 23806.134000, 1778.800051, 1778.800051, 0.000000, X, Y) && !ellipse(27100.429200, 26075.088000, 1102.832032, 1102.832032, 0.000000, X, Y) && !ellipse(22057.033646, 24397.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21270.884660, 26748.046000, 1342.752039, 685.217620, 101.347500, X, Y) && !ellipse(25875.476868, 24382.822052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26614.198000, 24352.090000, 1136.816033, 1136.816033, 0.000000, X, Y) && !ellipse(24691.031128, 25156.364838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.856323, 25446.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21344.248550, 27350.847443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21253.538000, 26337.953800, 2081.256060, 645.198419, 90.000000, X, Y) && !ellipse(28009.015930, 26727.552765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26047.289124, 26411.476837, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 21:00:37 2012] Writing fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src17.gif
[Sat Jun  9 21:52:21 2012] Mean detx,y = (-224.67, -2399.20) 
[Sat Jun  9 21:52:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 21:52:46 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 21:52:46 2012] Setting source spectrum file to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun  9 21:52:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jun 10 03:59:25 2012] Updating aperture counts using extracted products
[Sun Jun 10 03:59:25 2012] Error reading totcts from fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jun 10 03:59:28 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 03:59:28 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src17.arf
[Sun Jun 10 03:59:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 03:59:28 2012] Updating source flux to 1.2e-13
[Sun Jun 10 04:09:42 2012] Flag p found in src. 17 procflags, skipping spectral fitting
[Sun Jun 10 04:09:42 2012] Flag c found in src. 17 procflags, skipping spectral fitting