[Fri Jun  8 18:47:14 2012] Detection parameters:
  Position = (269.2, 243.9) = 18 52 41.96 0 37 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 391.5 +/- 28.2
  Background counts = 77.0
  Rate = 0.02 +/- 0.001

[Fri Jun  8 18:47:16 2012] Off-axis axis estimate = 4.48'
[Fri Jun  8 23:46:43 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 23:46:43 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Fri Jun  8 23:46:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Fri Jun  8 23:46:43 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.67"
[Sat Jun  9 03:16:25 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jun  9 03:16:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src9.csv
[Sat Jun  9 03:16:25 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jun  9 03:16:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src9.csv
[Sat Jun  9 03:16:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 03:16:27 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jun  9 03:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jun  9 03:16:27 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jun  9 03:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jun  9 03:16:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 03:16:59 2012] Spatial fit model total counts = 2242.770000, observed total counts = 2010.000000
[Sat Jun  9 03:16:59 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  9 03:16:59 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 03:16:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 03:16:59 2012] Assessing source extent using major
[Sat Jun  9 03:16:59 2012] Source does appear to be extended
[Sat Jun  9 03:16:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 07:47:34 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 07:47:34 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Sat Jun  9 07:47:34 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Sat Jun  9 07:47:34 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.67"
[Sat Jun  9 12:31:46 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src9.ximg exists
[Sat Jun  9 12:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src9.csv
[Sat Jun  9 12:31:46 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Jun  9 12:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src9.csv
[Sat Jun  9 12:31:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 12:31:47 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Jun  9 12:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun  9 12:31:47 2012] fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Jun  9 12:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun  9 12:31:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 12:32:31 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.179960 pixels away
[Sat Jun  9 12:32:31 2012] Spatial fit model total counts = 3196.920000, observed total counts = 2673.000000
[Sat Jun  9 12:32:31 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  9 12:32:31 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:32:31 2012] Assessing source extent using major
[Sat Jun  9 12:32:31 2012] Source does appear to be extended
[Sat Jun  9 12:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 21:00:36 2012] XMMSAS src. selection expression = ellipse(23373.446289, 21172.573029, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  9 21:00:36 2012] Writing source region out to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src14_src.reg
[Sat Jun  9 21:00:36 2012] Extracting stamp from image fullrun_mos2_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (232, 206) - (307, 281)
[Sat Jun  9 21:00:36 2012] XMMSAS bgd. selection expression = annulus(23373.446289, 21172.573029, 1087.500000, 2175.000000, X, Y) && !ellipse(23398.528351, 23185.741028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24440.978000, 21537.504000, 1320.632038, 1320.632038, 0.000000, X, Y) && !ellipse(26381.012000, 22962.128000, 1246.400036, 1246.400036, 0.000000, X, Y) && !ellipse(22479.718400, 22112.521600, 1369.632039, 1369.632039, 0.000000, X, Y) && !ellipse(21960.148000, 22909.448000, 2252.664065, 2252.664065, 0.000000, X, Y) && !ellipse(25595.802000, 22387.384000, 2571.248074, 1123.896032, 140.788500, X, Y) && !ellipse(25835.944000, 22696.324000, 2505.984072, 2505.984072, 0.000000, X, Y) && !ellipse(22560.771300, 22494.798000, 1335.832038, 916.832026, 84.510000, X, Y) && !ellipse(22138.869600, 24048.786000, 1305.008038, 1305.008038, 0.000000, X, Y) && !ellipse(22767.212830, 21895.400772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24902.568000, 24328.340000, 1079.864031, 1079.864031, 0.000000, X, Y) && !ellipse(23717.291168, 23574.323151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23223.994690, 23002.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21077.489800, 23583.412600, 854.840025, 854.840025, 0.000000, X, Y) && !ellipse(26521.212800, 23806.134000, 1778.800051, 1778.800051, 0.000000, X, Y) && !ellipse(26614.198000, 24352.090000, 1136.816033, 1136.816033, 0.000000, X, Y) && !ellipse(20554.362000, 22303.072000, 1415.112041, 1415.112041, 0.000000, X, Y) && !ellipse(22656.572449, 21146.061234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21667.421200, 20873.474000, 924.352027, 924.352027, 0.000000, X, Y) && !ellipse(19151.142800, 24946.328000, 2976.896086, 1173.720034, 82.249000, X, Y) && !ellipse(20754.718400, 21295.201600, 923.432027, 923.432027, 0.000000, X, Y)
[Sat Jun  9 21:00:36 2012] Writing fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src14.gif
[Sat Jun  9 21:50:15 2012] Mean detx,y = (-108.35, 3522.22) 
[Sat Jun  9 21:50:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 21:50:28 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 21:50:29 2012] Setting source spectrum file to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun  9 21:50:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Jun 10 01:24:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 10 01:24:39 2012] rmf not generated due to insufficient counts
[Sun Jun 10 03:59:24 2012] Updating aperture counts using extracted products
[Sun Jun 10 03:59:24 2012] Error reading totcts from fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jun 10 03:59:28 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 03:59:28 2012] Using photon index=1.80, rate=0.0166, arf fullrun_mos2_xmm0550671801_pi300-10000_pass1_cl_src14.arf
[Sun Jun 10 03:59:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 03:59:28 2012] Updating source flux to 2.1e-13
[Sun Jun 10 04:09:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting