[Fri Jun  8 18:46:39 2012] Detection parameters:
  Position = (240.5, 242.0) = 18 52 50.29 0 37 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.9 +/- 14.3
  Background counts = 48.6
  Rate = 0.004 +/- 0.0007

[Fri Jun  8 18:46:40 2012] Off-axis axis estimate = 5.86'
[Fri Jun  8 20:02:42 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 20:02:42 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Fri Jun  8 20:02:42 2012] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.924
[Fri Jun  8 20:02:42 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 9.36"
[Fri Jun  8 23:46:40 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src46.ximg exists
[Fri Jun  8 23:46:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src46.csv
[Fri Jun  8 23:46:40 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src46_1.ximg exists
[Fri Jun  8 23:46:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src46.csv
[Fri Jun  8 23:46:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 23:46:42 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Fri Jun  8 23:46:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src46.csv
[Fri Jun  8 23:46:42 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Fri Jun  8 23:46:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src46.csv
[Fri Jun  8 23:46:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 03:16:48 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 10.134341 pixels away
[Sat Jun  9 03:16:48 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 03:16:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 03:16:48 2012] Assessing source extent using major
[Sat Jun  9 03:16:48 2012] Source does appear to be extended
[Sat Jun  9 03:16:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 04:15:46 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 04:15:46 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Sat Jun  9 04:15:46 2012] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.924
[Sat Jun  9 04:15:46 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 9.36"
[Sat Jun  9 07:47:33 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src42.ximg exists
[Sat Jun  9 07:47:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src42.csv
[Sat Jun  9 07:47:33 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src42_1.ximg exists
[Sat Jun  9 07:47:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src42.csv
[Sat Jun  9 07:47:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 07:47:34 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sat Jun  9 07:47:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Jun  9 07:47:34 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sat Jun  9 07:47:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Jun  9 07:47:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 12:32:13 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 10.866946 pixels away
[Sat Jun  9 12:32:13 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 10.116199 pixels away
[Sat Jun  9 12:32:13 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:32:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:32:13 2012] Assessing source extent using major
[Sat Jun  9 12:32:13 2012] Source does appear to be extended
[Sat Jun  9 12:32:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 14:45:06 2012] XMMSAS src. selection expression = ellipse(20876.420441, 21006.134552, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  9 14:45:06 2012] Writing source region out to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src53_src.reg
[Sat Jun  9 14:45:06 2012] Extracting stamp from image fullrun_mos1_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (203, 205) - (278, 280)
[Sat Jun  9 14:45:06 2012] XMMSAS bgd. selection expression = annulus(20876.420441, 21006.134552, 1087.500000, 2175.000000, X, Y) && !ellipse(24946.424000, 21850.092000, 2270.248065, 1533.376044, 323.574000, X, Y) && !ellipse(22599.926901, 22247.763765, 2515.904072, 2185.924804, 75.399666, X, Y) && !ellipse(24280.480000, 21453.778000, 1321.792038, 1321.792038, 0.000000, X, Y) && !ellipse(23474.964000, 21288.212200, 1358.584039, 1358.584039, 0.000000, X, Y) && !ellipse(21674.970000, 22934.972200, 1489.384043, 1489.384043, 0.000000, X, Y) && !ellipse(22578.364180, 22517.816000, 1334.960038, 1334.960038, 0.000000, X, Y) && !ellipse(22569.155200, 22047.142000, 1363.760039, 1363.760039, 0.000000, X, Y) && !ellipse(24945.868000, 24645.188000, 1953.488056, 1953.488056, 0.000000, X, Y) && !ellipse(23651.967800, 23471.819200, 1170.760034, 570.980016, 344.300000, X, Y) && !ellipse(22142.950000, 24027.464000, 1327.536038, 1327.536038, 0.000000, X, Y) && !ellipse(19629.905660, 23616.881600, 671.849619, 671.849619, 0.000000, X, Y) && !ellipse(21023.514374, 23956.134949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21068.015000, 23575.392000, 1379.888040, 604.788817, 85.642000, X, Y) && !ellipse(23858.162000, 23742.962000, 1741.744050, 1741.744050, 0.000000, X, Y) && !ellipse(21888.687531, 20757.905243, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 14:45:06 2012] Writing fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src53.gif
[Sat Jun  9 15:37:00 2012] Mean detx,y = (4444.95, 2348.07) 
[Sat Jun  9 15:37:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 15:37:35 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 15:37:36 2012] Setting source spectrum file to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Jun  9 15:37:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat Jun  9 20:24:26 2012] Not generating rmf since there are only 90 counts
[Sat Jun  9 20:24:26 2012] rmf not generated due to insufficient counts
[Sun Jun 10 03:59:20 2012] Updating aperture counts using extracted products
[Sun Jun 10 03:59:20 2012] Error reading totcts from fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun Jun 10 03:59:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 03:59:23 2012] Using photon index=1.80, rate=0.00443, arf fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src53.arf
[Sun Jun 10 03:59:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 03:59:23 2012] Updating source flux to 5.1e-14
[Sun Jun 10 03:59:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting