[Fri Jun 8 18:46:39 2012] Detection parameters: Position = (243.2, 268.0) = 18 52 49.50 0 39 18.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 219.9 +/- 24.4 Background counts = 93.3 Rate = 0.008 +/- 0.0009 [Fri Jun 8 18:46:40 2012] Off-axis axis estimate = 4.57' [Fri Jun 8 20:02:42 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting [Fri Jun 8 20:02:42 2012] Initial guess for spatial extent in simple fitting = 8.71" [Fri Jun 8 20:02:42 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997 [Fri Jun 8 20:02:42 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.71" [Fri Jun 8 23:46:40 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src25.ximg exists [Fri Jun 8 23:46:40 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src25_1.ximg exists [Fri Jun 8 23:46:40 2012] Fit fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src25 appears to have run properly [Fri Jun 8 23:46:42 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src25.ximg exists [Fri Jun 8 23:46:42 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists [Fri Jun 8 23:46:42 2012] Fit fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly [Sat Jun 9 03:16:48 2012] Source 49 is offset by 8.753834 and 2.459057 pixels which is larger than 2 X fitted extent = 1.058023 x 1.058023, not incorporating fit results [Sat Jun 9 03:16:48 2012] Spatial fit model total counts = 1459.190000, observed total counts = 1495.000000 [Sat Jun 9 03:16:48 2012] Offset between fit and detection position for source 49 = 2.111172 pixels [Sat Jun 9 03:16:48 2012] Warning, changing simple spatial fit ID from 25 to 23 [Sat Jun 9 03:16:48 2012] 1472.296700 total counts/ 1402.780000 bgd. counts: snr = 1.856070 Spatial fit parameters: Offset between fit and detection position for source 49 = 2.111172 pixels Position = (241.9, 269.6) = 18 52 49.89 0 39 24.4 Extent = 5.7 (4.2-10.0)", rotation angle = 0 Source counts = 69.5 +/- 38.4 Background counts = 1402.8 Rate = 0.002 +/- 0.001 [Sat Jun 9 03:16:48 2012] Vigneting correction estimate = 1.000000 [Sat Jun 9 03:16:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 9 03:16:48 2012] Assessing source extent using major axis lower bound [Sat Jun 9 03:16:48 2012] Source does appear to be extended [Sat Jun 9 03:16:48 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 9 03:16:48 2012] Source is confused with source 5 [Sat Jun 9 04:15:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 9 04:15:46 2012] Initial guess for spatial extent in simple fitting = 5.74" [Sat Jun 9 04:15:46 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.907 [Sat Jun 9 04:15:46 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 5.74" [Sat Jun 9 07:47:32 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src24.ximg exists [Sat Jun 9 07:47:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src24.csv [Sat Jun 9 07:47:32 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src24_1.ximg exists [Sat Jun 9 07:47:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src24.csv [Sat Jun 9 07:47:32 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 9 07:47:34 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src24.ximg exists [Sat Jun 9 07:47:34 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists [Sat Jun 9 07:47:34 2012] Fit fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly [Sat Jun 9 12:32:13 2012] Spatial fit model total counts = 1500.840000, observed total counts = 1495.000000 [Sat Jun 9 12:32:13 2012] Offset between fit and detection position for source 49 = 2.063452 pixels [Sat Jun 9 12:32:13 2012] Warning, changing simple spatial fit ID from 24 to 22 [Sat Jun 9 12:32:13 2012] 1540.336000 total counts/ 1322.850000 bgd. counts: snr = 5.979653 Spatial fit parameters: Offset between fit and detection position for source 49 = 2.063452 pixels Position = (242.7, 271.5) = 18 52 49.65 0 39 32.6 Extent = 17.2 (14.8-34.5)" x 7.6 (3.2-10.4)", rotation angle = 86 (77-90) degrees Source counts = 217.5 +/- 39.2 Background counts = 1322.8 Rate = 0.008 +/- 0.001 [Sat Jun 9 12:32:13 2012] Vigneting correction estimate = 1.000000 [Sat Jun 9 12:32:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 9 12:32:13 2012] Assessing source extent using major axis lower bound [Sat Jun 9 12:32:13 2012] Source does appear to be extended [Sat Jun 9 12:32:13 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.42 [Sat Jun 9 14:45:05 2012] XMMSAS src. selection expression = ellipse(21068.015000, 23575.392000, 1034.916030, 453.591613, 85.642000, X, Y) [Sat Jun 9 14:45:05 2012] Writing source region out to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src49_src.reg [Sat Jun 9 14:45:05 2012] Extracting stamp from image fullrun_mos1_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (183, 212) - (302, 331) [Sat Jun 9 14:45:05 2012] XMMSAS bgd. selection expression = annulus(21068.015000, 23575.392000, 1724.860050, 3449.720099, X, Y) && !ellipse(24422.120000, 24635.880000, 1170.760034, 1170.760034, 0.000000, X, Y) && !ellipse(24946.424000, 21850.092000, 2270.248065, 1533.376044, 323.574000, X, Y) && !ellipse(25592.354000, 22374.396000, 1236.240036, 1034.008030, 136.776505, X, Y) && !ellipse(22599.926901, 22247.763765, 2515.904072, 2185.924804, 75.399666, X, Y) && !ellipse(24280.480000, 21453.778000, 1321.792038, 1321.792038, 0.000000, X, Y) && !ellipse(23474.964000, 21288.212200, 1358.584039, 1358.584039, 0.000000, X, Y) && !ellipse(21674.970000, 22934.972200, 1489.384043, 1489.384043, 0.000000, X, Y) && !ellipse(22578.364180, 22517.816000, 1334.960038, 1334.960038, 0.000000, X, Y) && !ellipse(22569.155200, 22047.142000, 1363.760039, 1363.760039, 0.000000, X, Y) && !ellipse(21473.594940, 25349.964264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24442.639200, 27038.710800, 1152.824033, 1152.824033, 0.000000, X, Y) && !ellipse(24945.868000, 24645.188000, 1953.488056, 1953.488056, 0.000000, X, Y) && !ellipse(23651.967800, 23471.819200, 1170.760034, 570.980016, 344.300000, X, Y) && !ellipse(22142.950000, 24027.464000, 1327.536038, 1327.536038, 0.000000, X, Y) && !ellipse(19629.905660, 23616.881600, 671.849619, 671.849619, 0.000000, X, Y) && !ellipse(21023.514374, 23956.134949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23858.162000, 23742.962000, 1741.744050, 1741.744050, 0.000000, X, Y) && !ellipse(25030.057129, 22972.332428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25743.298000, 23853.341200, 1344.680039, 355.900010, 15.232000, X, Y) && !ellipse(19010.261414, 24429.439056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21888.687531, 20757.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21277.782380, 26540.997800, 845.936024, 615.822418, 190.977000, X, Y) && !ellipse(21407.616000, 27380.151600, 917.288026, 917.288026, 0.000000, X, Y) && !ellipse(24735.958000, 26999.826000, 1085.728031, 756.999222, 27.248400, X, Y) && !ellipse(19671.886200, 24430.719200, 614.646418, 614.646418, 0.000000, X, Y) && !ellipse(21709.016388, 24306.386414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19052.379471, 25260.253479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20876.420441, 21006.134552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21113.206000, 25978.180000, 1327.088038, 1327.088038, 0.000000, X, Y) && !ellipse(25024.847961, 25310.019348, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 9 14:45:05 2012] Writing fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src49.gif [Sat Jun 9 15:28:39 2012] Mean detx,y = (2020.11, 2752.30) [Sat Jun 9 15:28:41 2012] Setting backscal keywords in source and bgd. spectrum [Sat Jun 9 15:29:04 2012] Binned source spectrum to 10 counts/bin [Sat Jun 9 15:29:06 2012] Setting source spectrum file to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src49_src_b10.pi.gz [Sat Jun 9 15:29:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src49_bgd.pi.gz [Sun Jun 10 03:59:19 2012] Updating aperture counts using extracted products [Sun Jun 10 03:59:19 2012] Error reading totcts from fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src49_src_b10.pi.gz [Sun Jun 10 03:59:22 2012] Calculating source flux in energy range 0.30-8.00 [Sun Jun 10 03:59:22 2012] Using photon index=1.80, rate=0.0076, arf fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src49.arf [Sun Jun 10 03:59:22 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 10 03:59:22 2012] Updating source flux to 9.3e-14 [Sun Jun 10 03:59:32 2012] Flag b found in src. 49 procflags, skipping spectral fitting [Sun Jun 10 03:59:32 2012] Flag c found in src. 49 procflags, skipping spectral fitting