[Fri Jun  8 18:46:39 2012] Detection parameters:
  Position = (242.2, 275.9) = 18 52 49.80 0 39 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.4 +/- 22.3
  Background counts = 82.8
  Rate = 0.009 +/- 0.0009

[Fri Jun  8 18:46:40 2012] Off-axis axis estimate = 4.39'
[Fri Jun  8 20:02:42 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 20:02:42 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Fri Jun  8 20:02:42 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.730
[Fri Jun  8 20:02:42 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.62"
[Fri Jun  8 23:46:40 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jun  8 23:46:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src23.csv
[Fri Jun  8 23:46:40 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jun  8 23:46:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src23.csv
[Fri Jun  8 23:46:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 23:46:42 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jun  8 23:46:42 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jun  8 23:46:42 2012] Fit fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Jun  9 03:16:48 2012] Warning, spatial fit 23 centroid is now closest to src. 49
[Sat Jun  9 03:16:48 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 03:16:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 03:16:48 2012] Assessing source extent using major
[Sat Jun  9 03:16:48 2012] Source does appear to be extended
[Sat Jun  9 03:16:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 03:16:48 2012] Source is confused with source 49
[Sat Jun  9 04:15:46 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 04:15:46 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Sat Jun  9 04:15:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.730
[Sat Jun  9 04:15:46 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.62"
[Sat Jun  9 07:47:32 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src22.ximg exists
[Sat Jun  9 07:47:32 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Jun  9 07:47:32 2012] Fit fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src22 appears to have run properly
[Sat Jun  9 07:47:34 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Jun  9 07:47:34 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Jun  9 07:47:34 2012] Fit fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Jun  9 12:32:13 2012] Warning, spatial fit 22 centroid is now closest to src. 49
[Sat Jun  9 12:32:13 2012] Source 44 is offset by -0.691750 and 7.522705 pixels which is larger than
2 X fitted extent = 3.591844 x 3.591844, not incorporating fit results
[Sat Jun  9 12:32:13 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:32:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:32:13 2012] Assessing source extent using major
[Sat Jun  9 12:32:13 2012] Source does appear to be extended
[Sat Jun  9 12:32:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 14:45:05 2012] XMMSAS src. selection expression = ellipse(21023.514374, 23956.134949, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  9 14:45:05 2012] Writing source region out to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src44_src.reg
[Sat Jun  9 14:45:05 2012] Extracting stamp from image fullrun_mos1_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (205, 238) - (280, 313)
[Sat Jun  9 14:45:05 2012] XMMSAS bgd. selection expression = annulus(21023.514374, 23956.134949, 1087.500000, 2175.000000, X, Y) && !ellipse(24946.424000, 21850.092000, 2270.248065, 1533.376044, 323.574000, X, Y) && !ellipse(22599.926901, 22247.763765, 2515.904072, 2185.924804, 75.399666, X, Y) && !ellipse(24280.480000, 21453.778000, 1321.792038, 1321.792038, 0.000000, X, Y) && !ellipse(23474.964000, 21288.212200, 1358.584039, 1358.584039, 0.000000, X, Y) && !ellipse(21674.970000, 22934.972200, 1489.384043, 1489.384043, 0.000000, X, Y) && !ellipse(22578.364180, 22517.816000, 1334.960038, 1334.960038, 0.000000, X, Y) && !ellipse(22569.155200, 22047.142000, 1363.760039, 1363.760039, 0.000000, X, Y) && !ellipse(21473.594940, 25349.964264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24945.868000, 24645.188000, 1953.488056, 1953.488056, 0.000000, X, Y) && !ellipse(23651.967800, 23471.819200, 1170.760034, 570.980016, 344.300000, X, Y) && !ellipse(22142.950000, 24027.464000, 1327.536038, 1327.536038, 0.000000, X, Y) && !ellipse(19629.905660, 23616.881600, 671.849619, 671.849619, 0.000000, X, Y) && !ellipse(21068.015000, 23575.392000, 1379.888040, 604.788817, 85.642000, X, Y) && !ellipse(23858.162000, 23742.962000, 1741.744050, 1741.744050, 0.000000, X, Y) && !ellipse(19010.261414, 24429.439056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21277.782380, 26540.997800, 845.936024, 615.822418, 190.977000, X, Y) && !ellipse(19671.886200, 24430.719200, 614.646418, 614.646418, 0.000000, X, Y) && !ellipse(21709.016388, 24306.386414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19052.379471, 25260.253479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20876.420441, 21006.134552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21113.206000, 25978.180000, 1327.088038, 1327.088038, 0.000000, X, Y)
[Sat Jun  9 14:45:05 2012] Writing fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src44.gif
[Sat Jun  9 15:27:52 2012] Mean detx,y = (1651.65, 2848.56) 
[Sat Jun  9 15:27:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 15:28:09 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 15:28:10 2012] Setting source spectrum file to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Jun  9 15:28:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Jun  9 18:54:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  9 18:54:34 2012] rmf not generated due to insufficient counts
[Sun Jun 10 03:59:19 2012] Updating aperture counts using extracted products
[Sun Jun 10 03:59:19 2012] Error reading totcts from fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun Jun 10 03:59:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 03:59:22 2012] Using photon index=1.80, rate=0.00887, arf fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src44.arf
[Sun Jun 10 03:59:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 03:59:22 2012] Updating source flux to 9.5e-14
[Sun Jun 10 03:59:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting