[Fri Jun  8 18:46:38 2012] Detection parameters:
  Position = (312.0, 309.9) = 18 52 29.55 0 42 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.1 +/- 20.6
  Background counts = 51.1
  Rate = 0.008 +/- 0.0008

[Fri Jun  8 18:46:40 2012] Off-axis axis estimate = 1.29'
[Fri Jun  8 20:02:42 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 20:02:42 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Fri Jun  8 20:02:42 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885
[Fri Jun  8 20:02:42 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.07"
[Fri Jun  8 23:46:40 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jun  8 23:46:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src27.csv
[Fri Jun  8 23:46:40 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jun  8 23:46:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src27.csv
[Fri Jun  8 23:46:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 23:46:42 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jun  8 23:46:42 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jun  8 23:46:42 2012] Fit fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Jun  9 03:16:48 2012] Spatial fit model total counts = 1715.240000, observed total counts = 1718.000000
[Sat Jun  9 03:16:48 2012] Offset between fit and detection position for source 22 = 1.500644 pixels
[Sat Jun  9 03:16:48 2012] Warning, changing simple spatial fit ID from 27 to 26
[Sat Jun  9 03:16:48 2012] 1642.440000 total counts/ 1378.020000 bgd. counts: snr = 7.123059
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.500644 pixels
  Position = (310.8, 309.0) = 18 52 29.91 0 42 15.5
  Extent = 13.9 (13.7-27.8)", rotation angle = 0
  Source counts = 264.4 +/- 40.5
  Background counts = 1378.0
  Rate = 0.009 +/- 0.001
[Sat Jun  9 03:16:48 2012] Spatial fit model total counts = 1448.770000, observed total counts = 1440.000000
[Sat Jun  9 03:16:48 2012] Offset between fit and detection position for source 22 = 1.162346 pixels
[Sat Jun  9 03:16:48 2012] Warning, changing simple spatial fit ID from 26 to 27
[Sat Jun  9 03:16:48 2012] 1344.593000 total counts/ 1082.280000 bgd. counts: snr = 7.973518
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.162346 pixels
  Position = (311.4, 308.0) = 18 52 29.72 0 42 11.3
  Extent = 14.1 (14.0-28.3)", rotation angle = 0
  Source counts = 262.3 +/- 36.7
  Background counts = 1082.3
  Rate = 0.009 +/- 0.001
[Sat Jun  9 03:16:48 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 03:16:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 03:16:48 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 03:16:48 2012] Source does appear to be extended
[Sat Jun  9 03:16:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 03:16:48 2012] Source is confused with source 28
[Sat Jun  9 03:16:48 2012] Source is confused with source 21
[Sat Jun  9 04:15:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 04:15:46 2012] Initial guess for spatial extent in simple fitting = 14.14"
[Sat Jun  9 04:15:46 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.995
[Sat Jun  9 04:15:46 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 14.14"
[Sat Jun  9 07:47:32 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jun  9 07:47:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src25.csv
[Sat Jun  9 07:47:32 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jun  9 07:47:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src25.csv
[Sat Jun  9 07:47:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 07:47:34 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jun  9 07:47:34 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jun  9 07:47:34 2012] Fit fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Jun  9 12:32:13 2012] Warning, spatial fit 25 centroid is now closest to src. 21
[Sat Jun  9 12:32:13 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:32:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:32:13 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 12:32:13 2012] Source does appear to be extended
[Sat Jun  9 12:32:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 14:45:05 2012] XMMSAS src. selection expression = ellipse(27045.702400, 26749.448400, 848.550024, 848.550024, 0.000000, X, Y)
[Sat Jun  9 14:45:05 2012] Writing source region out to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src22_src.reg
[Sat Jun  9 14:45:05 2012] Extracting stamp from image fullrun_mos1_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (263, 259) - (360, 357)
[Sat Jun  9 14:45:05 2012] XMMSAS bgd. selection expression = annulus(27045.702400, 26749.448400, 1414.250041, 2828.500081, X, Y) && !ellipse(24422.120000, 24635.880000, 1170.760034, 1170.760034, 0.000000, X, Y) && !ellipse(24946.424000, 21850.092000, 2270.248065, 1533.376044, 323.574000, X, Y) && !ellipse(22599.926901, 22247.763765, 2515.904072, 2185.924804, 75.399666, X, Y) && !ellipse(26368.038000, 23018.609800, 1236.240036, 1236.240036, 0.000000, X, Y) && !ellipse(26034.326400, 23743.399800, 672.340819, 672.340819, 0.000000, X, Y) && !ellipse(24442.639200, 27038.710800, 1152.824033, 1152.824033, 0.000000, X, Y) && !ellipse(24945.868000, 24645.188000, 1953.488056, 1953.488056, 0.000000, X, Y) && !ellipse(27389.637600, 25812.355800, 1129.128032, 1129.128032, 0.000000, X, Y) && !ellipse(25738.826129, 24986.065278, 1170.760034, 782.724645, 342.246237, X, Y) && !ellipse(23651.967800, 23471.819200, 1170.760034, 570.980016, 344.300000, X, Y) && !ellipse(26433.770000, 23645.410000, 1158.184033, 1158.184033, 0.000000, X, Y) && !ellipse(23858.162000, 23742.962000, 1741.744050, 1741.744050, 0.000000, X, Y) && !ellipse(25888.526000, 25084.682000, 1063.632031, 1063.632031, 0.000000, X, Y) && !ellipse(25743.298000, 23853.341200, 1344.680039, 355.900010, 15.232000, X, Y) && !ellipse(24735.958000, 26999.826000, 1085.728031, 756.999222, 27.248400, X, Y) && !ellipse(26383.024000, 25761.470000, 1759.936051, 1759.936051, 0.000000, X, Y) && !ellipse(28397.772600, 26109.940000, 892.256026, 892.256026, 0.000000, X, Y) && !ellipse(28061.442139, 25516.758514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26847.508000, 24473.594000, 1124.664032, 1124.664032, 0.000000, X, Y) && !ellipse(25551.324000, 26617.746000, 974.192028, 974.192028, 0.000000, X, Y) && !ellipse(25024.847961, 25310.019348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26903.942400, 27243.310000, 2242.824065, 2242.824065, 0.000000, X, Y)
[Sat Jun  9 14:45:05 2012] Writing fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src22.gif
[Sat Jun  9 15:29:12 2012] Mean detx,y = (-2398.07, -2273.77) 
[Sat Jun  9 15:29:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 15:29:36 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 15:29:36 2012] Setting source spectrum file to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jun  9 15:29:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sun Jun 10 03:59:19 2012] Updating aperture counts using extracted products
[Sun Jun 10 03:59:20 2012] Error reading totcts from fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun Jun 10 03:59:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 03:59:22 2012] Using photon index=1.80, rate=0.00917, arf fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src22.arf
[Sun Jun 10 03:59:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 03:59:22 2012] Updating source flux to 9.6e-14
[Sun Jun 10 03:59:32 2012] Flag c found in src. 22 procflags, skipping spectral fitting