[Fri Jun  8 18:46:38 2012] Detection parameters:
  Position = (252.8, 185.2) = 18 52 46.73 0 33 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 727.3 +/- 33.3
  Background counts = 15.3
  Rate = 0.04 +/- 0.002

[Fri Jun  8 18:46:40 2012] Off-axis axis estimate = 8.85'
[Fri Jun  8 20:02:42 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 20:02:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 20:02:42 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Fri Jun  8 20:02:42 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.003
[Fri Jun  8 20:02:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.85"
[Fri Jun  8 23:46:38 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  8 23:46:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src1.csv
[Fri Jun  8 23:46:38 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  8 23:46:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src1.csv
[Fri Jun  8 23:46:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 23:46:41 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  8 23:46:41 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  8 23:46:41 2012] Fit fullrun_mos1_xmm0550671801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  9 03:16:48 2012] Spatial fit model total counts = 957.297000, observed total counts = 955.000000
[Sat Jun  9 03:16:48 2012] Offset between fit and detection position for source 1 = 0.225744 pixels
[Sat Jun  9 03:16:48 2012] 961.529000 total counts/ 392.664000 bgd. counts: snr = 28.707718
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.225744 pixels
  Position = (252.9, 185.4) = 18 52 46.71 0 33 18.0
  Extent = 6.9 (6.4-7.4)", rotation angle = 0
  Source counts = 568.9 +/- 31.0
  Background counts = 392.7
  Rate = 0.02 +/- 0.001
[Sat Jun  9 03:16:48 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 03:16:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 03:16:48 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 03:16:48 2012] Source does appear to be extended
[Sat Jun  9 03:16:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 04:15:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 04:15:46 2012] Initial guess for spatial extent in simple fitting = 6.89"
[Sat Jun  9 04:15:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.151
[Sat Jun  9 04:15:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.89"
[Sat Jun  9 07:47:32 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  9 07:47:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 07:47:32 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  9 07:47:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 07:47:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 07:47:33 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  9 07:47:33 2012] fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  9 07:47:33 2012] Fit fullrun_mos1_xmm0550671801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  9 12:32:12 2012] Spatial fit model total counts = 848.294000, observed total counts = 849.000000
[Sat Jun  9 12:32:12 2012] Offset between fit and detection position for source 1 = 0.020787 pixels
[Sat Jun  9 12:32:12 2012] 849.373000 total counts/ 297.185000 bgd. counts: snr = 32.031223
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.020787 pixels
  Position = (252.9, 185.4) = 18 52 46.70 0 33 17.9
  Extent = 6.7 (6.2-7.2)", rotation angle = 0
  Source counts = 552.2 +/- 29.1
  Background counts = 297.2
  Rate = 0.02 +/- 0.001
[Sat Jun  9 12:32:13 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:32:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:32:13 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 12:32:13 2012] Source does appear to be extended
[Sat Jun  9 12:32:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 14:45:03 2012] XMMSAS src. selection expression = ellipse(21951.353220, 16082.145200, 401.349612, 401.349612, 0.000000, X, Y)
[Sat Jun  9 14:45:03 2012] Writing source region out to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  9 14:45:03 2012] Extracting stamp from image fullrun_mos1_xmm0550671801_pi300-10000_cl_sm2.00.img.gz, (230, 162) - (276, 208)
[Sat Jun  9 14:45:03 2012] XMMSAS bgd. selection expression = annulus(21951.353220, 16082.145200, 668.916019, 1337.832038, X, Y)
[Sat Jun  9 14:45:03 2012] Writing fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src1.gif
[Sat Jun  9 14:45:11 2012] Mean detx,y = (9071.58, 229.05) 
[Sat Jun  9 14:45:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 14:45:28 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 14:45:28 2012] Setting source spectrum file to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  9 14:45:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 10 03:59:18 2012] Updating aperture counts using extracted products
[Sun Jun 10 03:59:18 2012] Error reading totcts from fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 10 03:59:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 03:59:21 2012] Using photon index=1.80, rate=0.0193, arf fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src1.arf
[Sun Jun 10 03:59:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 03:59:21 2012] Updating source flux to 3.2e-13
[Sun Jun 10 04:09:42 2012] Reading fit data from xmm0550671801/analysis//spectral/fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 10 04:09:42 2012] Spectral fit parameter nH value = 4.2908e+22
[Sun Jun 10 04:09:42 2012] Spectral fit parameter PhoIndex value = 4.25705
[Sun Jun 10 04:09:42 2012] Failed to get F(0.3-8.0) from xmm0550671801/analysis//spectral/fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 10 04:09:42 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 04:09:42 2012] Using Nh = 4.3e+22, photon index=4.26, rate=0.0193, arf fullrun_mos1_xmm0550671801_pi300-10000_pass1_cl_src1.arf
[Sun Jun 10 04:09:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 04:09:42 2012] Updating source flux to 4.6e-13