[Sat Aug  4 03:51:27 2012] Detection parameters:
  Position = (253.9, 238.1) = 18 52 47.03 0 37 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.9 +/- 16.5
  Background counts = 48.6
  Rate = 0.004 +/- 0.0008

[Sat Aug  4 03:51:27 2012] Off-axis axis estimate = 5.44'
[Sat Aug  4 06:38:48 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 06:38:48 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Sat Aug  4 06:38:48 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.107
[Sat Aug  4 06:38:48 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 9.15"
[Sat Aug  4 09:00:37 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src43.ximg exists
[Sat Aug  4 09:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src43.csv
[Sat Aug  4 09:00:37 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src43_1.ximg exists
[Sat Aug  4 09:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src43.csv
[Sat Aug  4 09:00:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 09:00:38 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sat Aug  4 09:00:38 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sat Aug  4 09:00:38 2012] Fit fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sat Aug  4 09:00:57 2012] Spatial fit model total counts = 1669.680000, observed total counts = 1665.000000
[Sat Aug  4 09:00:57 2012] Offset between fit and detection position for source 60 = 2.362859 pixels
[Sat Aug  4 09:00:57 2012] Warning, changing simple spatial fit ID from 43 to 35
[Sat Aug  4 09:00:57 2012] 1771.779000 total counts/ 1452.660000 bgd. counts: snr = 8.372799
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 2.362859 pixels
  Position = (251.8, 236.9) = 18 52 47.63 0 37 12.8
  Extent = 17.8 (17.8-35.6)", rotation angle = 0
  Source counts = 319.1 +/- 42.1
  Background counts = 1452.7
  Rate = 0.01 +/- 0.002
[Sat Aug  4 09:00:57 2012] Spatial fit model total counts = 952.467000, observed total counts = 954.000000
[Sat Aug  4 09:00:57 2012] Offset between fit and detection position for source 60 = 1.310193 pixels
[Sat Aug  4 09:00:57 2012] Warning, changing simple spatial fit ID from 35 to 43
[Sat Aug  4 09:00:57 2012] 986.642000 total counts/ 758.793000 bgd. counts: snr = 8.271523
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 1.310193 pixels
  Position = (250.9, 236.0) = 18 52 47.91 0 37 8.9
  Extent = 18.3 (18.3-36.6)", rotation angle = 0
  Source counts = 227.8 +/- 31.4
  Background counts = 758.8
  Rate = 0.009 +/- 0.001
[Sat Aug  4 09:00:57 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 09:00:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 09:00:57 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 09:00:57 2012] Source does appear to be extended
[Sat Aug  4 09:00:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 09:00:57 2012] Source is confused with source 57
[Sat Aug  4 13:16:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 13:16:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 13:16:15 2012] Initial guess for spatial extent in simple fitting = 18.30"
[Sat Aug  4 13:16:15 2012] source mask rpix=4.2, npix_max = 88, mask sum = 100, frac = 1.129
[Sat Aug  4 13:16:15 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 18.30"
[Sat Aug  4 17:00:19 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src42.ximg exists
[Sat Aug  4 17:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src42.csv
[Sat Aug  4 17:00:19 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src42_1.ximg exists
[Sat Aug  4 17:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src42.csv
[Sat Aug  4 17:00:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 17:00:21 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sat Aug  4 17:00:21 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sat Aug  4 17:00:21 2012] Fit fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Sat Aug  4 17:00:49 2012] Spatial fit model total counts = 1668.650000, observed total counts = 1665.000000
[Sat Aug  4 17:00:49 2012] Offset between fit and detection position for source 60 = 0.887812 pixels
[Sat Aug  4 17:00:49 2012] Warning, changing simple spatial fit ID from 42 to 34
[Sat Aug  4 17:00:49 2012] 1724.708000 total counts/ 1246.430000 bgd. counts: snr = 13.547104
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.887812 pixels
  Position = (250.0, 235.9) = 18 52 48.16 0 37 8.5
  Extent = 28.8 (17.8-57.6)" x 25.0 (18.5-28.8)", rotation angle = 66 (19-90) degrees
  Source counts = 478.3 +/- 41.5
  Background counts = 1246.4
  Rate = 0.02 +/- 0.002
[Sat Aug  4 17:00:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 17:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 17:00:49 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 17:00:49 2012] Source does appear to be extended
[Sat Aug  4 17:00:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.62
[Sun Aug  5 02:50:08 2012] XMMSAS src. selection expression = ellipse(21699.276000, 20477.380000, 1727.328050, 1501.524043, 66.185000, X, Y)
[Sun Aug  5 02:50:08 2012] Writing source region out to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src60_src.reg
[Sun Aug  5 02:50:08 2012] Extracting stamp from image fullrun_mos2_xmm0550671301_pi300-10000_cl_sm2.00.img.gz, (151, 137) - (349, 335)
[Sun Aug  5 02:50:08 2012] XMMSAS bgd. selection expression = annulus(21699.276000, 20477.380000, 2878.880083, 5757.760166, X, Y) && !ellipse(22142.860140, 15878.489800, 557.084016, 557.084016, 0.000000, X, Y) && !ellipse(24593.382000, 24307.573400, 315.592809, 315.592809, 0.000000, X, Y) && !ellipse(24637.026000, 21308.154000, 1327.448038, 1327.448038, 0.000000, X, Y) && !ellipse(25711.418000, 22042.212000, 2599.752075, 2599.752075, 0.000000, X, Y) && !ellipse(22588.860000, 22064.728000, 1373.408040, 1373.408040, 0.000000, X, Y) && !ellipse(22201.478800, 23197.502000, 1322.400038, 1322.400038, 0.000000, X, Y) && !ellipse(22575.384000, 21442.478000, 2888.896083, 2888.896083, 0.000000, X, Y) && !ellipse(25275.952000, 21808.826000, 2010.528058, 1154.208033, 138.457000, X, Y) && !ellipse(21896.098000, 22808.920000, 2745.336079, 2745.336079, 0.000000, X, Y) && !ellipse(26010.416000, 23644.982000, 1165.872034, 1165.872034, 0.000000, X, Y) && !ellipse(26593.567000, 22745.756000, 2249.728065, 551.711216, 118.588000, X, Y) && !ellipse(25376.910000, 23922.140600, 1368.096039, 800.824023, 38.143000, X, Y) && !ellipse(24641.993200, 26825.986000, 803.648023, 803.648023, 0.000000, X, Y) && !ellipse(26065.011880, 24895.302200, 1053.912030, 1053.912030, 0.000000, X, Y) && !ellipse(27281.281400, 26524.330400, 1016.968029, 1016.968029, 0.000000, X, Y) && !ellipse(23261.369537, 22749.556885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27340.575200, 25816.180600, 1119.232032, 1119.232032, 0.000000, X, Y) && !ellipse(22512.600200, 23221.440000, 2598.536075, 2598.536075, 0.000000, X, Y) && !ellipse(25123.931000, 24388.424164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.485800, 22517.412000, 1339.904039, 1339.904039, 0.000000, X, Y) && !ellipse(21539.367040, 25071.788600, 1323.688038, 705.117620, 87.825280, X, Y) && !ellipse(24028.603973, 23450.715607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22457.916000, 24030.880000, 734.470421, 734.470421, 0.000000, X, Y) && !ellipse(26860.832000, 23621.266000, 1171.832034, 1171.832034, 0.000000, X, Y) && !ellipse(25023.478000, 26665.266000, 1053.528030, 1053.528030, 0.000000, X, Y) && !ellipse(27200.476000, 24249.526000, 1004.048029, 1004.048029, 0.000000, X, Y) && !ellipse(28221.738000, 25582.530000, 2388.304069, 2388.304069, 0.000000, X, Y) && !ellipse(19823.180400, 23370.007800, 705.992820, 705.992820, 0.000000, X, Y) && !ellipse(27310.217800, 25556.532000, 1049.376030, 1049.376030, 0.000000, X, Y) && !ellipse(19260.124400, 25375.433200, 694.520820, 694.520820, 0.000000, X, Y) && !ellipse(21463.785800, 26454.933000, 1328.632038, 1328.632038, 0.000000, X, Y) && !ellipse(27298.626000, 26675.172000, 997.680029, 997.680029, 0.000000, X, Y) && !ellipse(19832.946447, 24032.290748, 1447.960042, 358.512345, 90.575765, X, Y) && !ellipse(23974.624573, 22482.614929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22591.410000, 21194.874000, 2927.584084, 2927.584084, 0.000000, X, Y) && !ellipse(25490.236600, 26062.423800, 1053.528030, 432.056812, 241.082000, X, Y) && !ellipse(21388.991104, 25970.287964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21049.945600, 21068.899200, 532.524015, 532.524015, 0.000000, X, Y) && !ellipse(23103.018280, 23606.422455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28125.696503, 26473.615143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19753.149200, 22715.951400, 941.520027, 941.520027, 0.000000, X, Y) && !ellipse(21555.497000, 26724.292200, 1041.320030, 1041.320030, 0.000000, X, Y) && !ellipse(26200.072784, 26307.131531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19757.380020, 21892.271820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22126.472000, 19998.182000, 1444.448042, 1444.448042, 0.000000, X, Y)
[Sun Aug  5 02:50:08 2012] Writing fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src60.gif
[Sun Aug  5 03:37:37 2012] Mean detx,y = (-2118.60, 3683.33) 
[Sun Aug  5 03:37:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 03:38:59 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 03:38:59 2012] Setting source spectrum file to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sun Aug  5 03:38:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sun Aug  5 10:27:06 2012] Updating aperture counts using extracted products
[Sun Aug  5 10:27:06 2012] Error reading totcts from fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sun Aug  5 10:27:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 10:27:09 2012] Using photon index=1.80, rate=0.018, arf fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src60.arf
[Sun Aug  5 10:27:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 10:27:09 2012] Updating source flux to 2e-13
[Sun Aug  5 10:37:32 2012] Flag c found in src. 60 procflags, skipping spectral fitting