[Sat Aug 4 03:51:26 2012] Detection parameters: Position = (306.0, 292.9) = 18 52 31.91 0 41 15.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 153.5 +/- 20.4 Background counts = 71.0 Rate = 0.006 +/- 0.0008 [Sat Aug 4 03:51:27 2012] Off-axis axis estimate = 0.68' [Sat Aug 4 06:38:48 2012] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting [Sat Aug 4 06:38:48 2012] Initial guess for spatial extent in simple fitting = 6.77" [Sat Aug 4 06:38:48 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946 [Sat Aug 4 06:38:48 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 6.77" [Sat Aug 4 09:00:37 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src30.ximg exists [Sat Aug 4 09:00:37 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src30_1.ximg exists [Sat Aug 4 09:00:37 2012] Fit fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src30 appears to have run properly [Sat Aug 4 09:00:38 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists [Sat Aug 4 09:00:38 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists [Sat Aug 4 09:00:38 2012] Fit fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly [Sat Aug 4 09:00:57 2012] Spatial fit model total counts = 1718.250000, observed total counts = 1719.000000 [Sat Aug 4 09:00:57 2012] Offset between fit and detection position for source 38 = 8.138168 pixels [Sat Aug 4 09:00:57 2012] 1593.070000 total counts/ 1308.410000 bgd. counts: snr = 7.869634 Spatial fit parameters: Offset between fit and detection position for source 38 = 8.138168 pixels Position = (312.2, 298.2) = 18 52 30.11 0 41 39.3 Extent = 13.5 (13.5-27.1)", rotation angle = 0 Source counts = 284.7 +/- 39.9 Background counts = 1308.4 Rate = 0.01 +/- 0.002 [Sat Aug 4 09:00:57 2012] Source 38 is offset by 4.128069 and -0.520920 pixels which is larger than 2 X fitted extent = 2.251949 x 2.251949, not incorporating fit results [Sat Aug 4 09:00:57 2012] Vigneting correction estimate = 1.000000 [Sat Aug 4 09:00:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 4 09:00:57 2012] Assessing source extent using major axis lower bound [Sat Aug 4 09:00:57 2012] Source does appear to be extended [Sat Aug 4 09:00:57 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 4 09:00:57 2012] Source is confused with source 13 [Sat Aug 4 13:16:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Aug 4 13:16:15 2012] Initial guess for spatial extent in simple fitting = 13.54" [Sat Aug 4 13:16:15 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.939 [Sat Aug 4 13:16:15 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 13.54" [Sat Aug 4 17:00:19 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src29.ximg exists [Sat Aug 4 17:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src29.csv [Sat Aug 4 17:00:19 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src29_1.ximg exists [Sat Aug 4 17:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src29.csv [Sat Aug 4 17:00:19 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 4 17:00:21 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Sat Aug 4 17:00:21 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Sat Aug 4 17:00:21 2012] Fit fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly [Sat Aug 4 17:00:48 2012] Spatial fit model total counts = 1929.350000, observed total counts = 1930.000000 [Sat Aug 4 17:00:48 2012] Offset between fit and detection position for source 38 = 4.469718 pixels [Sat Aug 4 17:00:48 2012] Warning, changing simple spatial fit ID from 29 to 15 [Sat Aug 4 17:00:48 2012] 1351.227900 total counts/ 1253.220000 bgd. counts: snr = 2.768518 Spatial fit parameters: Offset between fit and detection position for source 38 = 4.469718 pixels Position = (314.5, 294.3) = 18 52 29.46 0 41 22.5 Extent = 13.1 (9.0-19.8)", rotation angle = 0 Source counts = 98.0 +/- 36.8 Background counts = 1253.2 Rate = 0.004 +/- 0.001 [Sat Aug 4 17:00:49 2012] Vigneting correction estimate = 1.000000 [Sat Aug 4 17:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 4 17:00:49 2012] Assessing source extent using major axis lower bound [Sat Aug 4 17:00:49 2012] Source does appear to be extended [Sat Aug 4 17:00:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Aug 5 02:50:07 2012] XMMSAS src. selection expression = ellipse(27310.217800, 25556.532000, 787.032023, 787.032023, 0.000000, X, Y) [Sun Aug 5 02:50:07 2012] Writing source region out to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src38_src.reg [Sun Aug 5 02:50:07 2012] Extracting stamp from image fullrun_mos2_xmm0550671301_pi300-10000_cl_sm2.00.img.gz, (269, 249) - (360, 340) [Sun Aug 5 02:50:07 2012] XMMSAS bgd. selection expression = annulus(27310.217800, 25556.532000, 1311.720038, 2623.440075, X, Y) && !ellipse(24593.382000, 24307.573400, 315.592809, 315.592809, 0.000000, X, Y) && !ellipse(25711.418000, 22042.212000, 2599.752075, 2599.752075, 0.000000, X, Y) && !ellipse(22575.384000, 21442.478000, 2888.896083, 2888.896083, 0.000000, X, Y) && !ellipse(25275.952000, 21808.826000, 2010.528058, 1154.208033, 138.457000, X, Y) && !ellipse(26010.416000, 23644.982000, 1165.872034, 1165.872034, 0.000000, X, Y) && !ellipse(26593.567000, 22745.756000, 2249.728065, 551.711216, 118.588000, X, Y) && !ellipse(25376.910000, 23922.140600, 1368.096039, 800.824023, 38.143000, X, Y) && !ellipse(24641.993200, 26825.986000, 803.648023, 803.648023, 0.000000, X, Y) && !ellipse(26065.011880, 24895.302200, 1053.912030, 1053.912030, 0.000000, X, Y) && !ellipse(27281.281400, 26524.330400, 1016.968029, 1016.968029, 0.000000, X, Y) && !ellipse(27340.575200, 25816.180600, 1119.232032, 1119.232032, 0.000000, X, Y) && !ellipse(22512.600200, 23221.440000, 2598.536075, 2598.536075, 0.000000, X, Y) && !ellipse(25123.931000, 24388.424164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.485800, 22517.412000, 1339.904039, 1339.904039, 0.000000, X, Y) && !ellipse(24028.603973, 23450.715607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26860.832000, 23621.266000, 1171.832034, 1171.832034, 0.000000, X, Y) && !ellipse(25023.478000, 26665.266000, 1053.528030, 1053.528030, 0.000000, X, Y) && !ellipse(27200.476000, 24249.526000, 1004.048029, 1004.048029, 0.000000, X, Y) && !ellipse(28221.738000, 25582.530000, 2388.304069, 2388.304069, 0.000000, X, Y) && !ellipse(27298.626000, 26675.172000, 997.680029, 997.680029, 0.000000, X, Y) && !ellipse(23974.624573, 22482.614929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22591.410000, 21194.874000, 2927.584084, 2927.584084, 0.000000, X, Y) && !ellipse(25490.236600, 26062.423800, 1053.528030, 432.056812, 241.082000, X, Y) && !ellipse(26087.632000, 28103.368000, 1145.736033, 1145.736033, 0.000000, X, Y) && !ellipse(28125.696503, 26473.615143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26200.072784, 26307.131531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26657.114000, 27804.928000, 1479.208043, 1479.208043, 0.000000, X, Y) [Sun Aug 5 02:50:07 2012] Writing fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src38.gif [Sun Aug 5 03:32:58 2012] Mean detx,y = (2585.95, -1494.95) [Sun Aug 5 03:32:59 2012] Setting backscal keywords in source and bgd. spectrum [Sun Aug 5 03:33:09 2012] Binned source spectrum to 10 counts/bin [Sun Aug 5 03:33:09 2012] Setting source spectrum file to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src38_src_b10.pi.gz [Sun Aug 5 03:33:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src38_bgd.pi.gz [Sun Aug 5 09:27:53 2012] Not generating rmf since there are only 98 counts [Sun Aug 5 09:27:53 2012] rmf not generated due to insufficient counts [Sun Aug 5 10:27:05 2012] Updating aperture counts using extracted products [Sun Aug 5 10:27:05 2012] Error reading totcts from fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src38_src_b10.pi.gz [Sun Aug 5 10:27:07 2012] Calculating source flux in energy range 0.30-8.00 [Sun Aug 5 10:27:07 2012] Using photon index=1.80, rate=0.00369, arf fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src38.arf [Sun Aug 5 10:27:07 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Aug 5 10:27:07 2012] Updating source flux to 3.6e-14 [Sun Aug 5 10:37:32 2012] Flag b found in src. 38 procflags, skipping spectral fitting [Sun Aug 5 10:37:32 2012] Flag c found in src. 38 procflags, skipping spectral fitting [Sun Aug 5 10:37:32 2012] Source 38 has fewer than 100.000000 counts, skipping spectral fitting