[Sat Aug  4 03:51:26 2012] Detection parameters:
  Position = (313.0, 313.8) = 18 52 29.87 0 42 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.6 +/- 18.4
  Background counts = 43.7
  Rate = 0.006 +/- 0.0008

[Sat Aug  4 03:51:27 2012] Off-axis axis estimate = 1.54'
[Sat Aug  4 06:38:48 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 06:38:48 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Sat Aug  4 06:38:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Sat Aug  4 06:38:48 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.20"
[Sat Aug  4 09:00:37 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src33.ximg exists
[Sat Aug  4 09:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src33.csv
[Sat Aug  4 09:00:37 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Aug  4 09:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src33.csv
[Sat Aug  4 09:00:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 09:00:38 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Aug  4 09:00:38 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Aug  4 09:00:38 2012] Fit fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sat Aug  4 09:00:57 2012] Spatial fit model total counts = 1102.510000, observed total counts = 1097.000000
[Sat Aug  4 09:00:57 2012] Offset between fit and detection position for source 27 = 6.144608 pixels
[Sat Aug  4 09:00:57 2012] 1078.899000 total counts/ 845.262000 bgd. counts: snr = 8.036111
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 6.144608 pixels
  Position = (314.2, 307.8) = 18 52 29.54 0 42 21.0
  Extent = 14.4 (14.1-28.8)", rotation angle = 0
  Source counts = 233.6 +/- 32.8
  Background counts = 845.3
  Rate = 0.009 +/- 0.001
[Sat Aug  4 09:00:57 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 09:00:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 09:00:57 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 09:00:57 2012] Source does appear to be extended
[Sat Aug  4 09:00:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 09:00:57 2012] Source is confused with source 13
[Sat Aug  4 13:16:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 13:16:15 2012] Initial guess for spatial extent in simple fitting = 14.39"
[Sat Aug  4 13:16:15 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.103
[Sat Aug  4 13:16:15 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 14.39"
[Sat Aug  4 17:00:19 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src32.ximg exists
[Sat Aug  4 17:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src32.csv
[Sat Aug  4 17:00:19 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat Aug  4 17:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src32.csv
[Sat Aug  4 17:00:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 17:00:21 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat Aug  4 17:00:21 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat Aug  4 17:00:21 2012] Fit fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Sat Aug  4 17:00:49 2012] Spatial fit model total counts = 2417.280000, observed total counts = 2418.000000
[Sat Aug  4 17:00:49 2012] Offset between fit and detection position for source 27 = 0.622925 pixels
[Sat Aug  4 17:00:49 2012] Warning, changing simple spatial fit ID from 32 to 29
[Sat Aug  4 17:00:49 2012] 1945.660000 total counts/ 1736.920000 bgd. counts: snr = 5.008593
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.622925 pixels
  Position = (314.3, 307.2) = 18 52 29.50 0 42 18.4
  Extent = 12.5 (9.1-17.1)", rotation angle = 0
  Source counts = 208.7 +/- 44.1
  Background counts = 1736.9
  Rate = 0.008 +/- 0.002
[Sat Aug  4 17:00:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 17:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 17:00:49 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 17:00:49 2012] Source does appear to be extended
[Sat Aug  4 17:00:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 02:50:07 2012] XMMSAS src. selection expression = ellipse(27298.626000, 26675.172000, 748.260022, 748.260022, 0.000000, X, Y)
[Sun Aug  5 02:50:07 2012] Writing source region out to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src27_src.reg
[Sun Aug  5 02:50:07 2012] Extracting stamp from image fullrun_mos2_xmm0550671301_pi300-10000_cl_sm2.00.img.gz, (271, 264) - (357, 350)
[Sun Aug  5 02:50:07 2012] XMMSAS bgd. selection expression = annulus(27298.626000, 26675.172000, 1247.100036, 2494.200072, X, Y) && !ellipse(24593.382000, 24307.573400, 315.592809, 315.592809, 0.000000, X, Y) && !ellipse(25711.418000, 22042.212000, 2599.752075, 2599.752075, 0.000000, X, Y) && !ellipse(22575.384000, 21442.478000, 2888.896083, 2888.896083, 0.000000, X, Y) && !ellipse(26010.416000, 23644.982000, 1165.872034, 1165.872034, 0.000000, X, Y) && !ellipse(26593.567000, 22745.756000, 2249.728065, 551.711216, 118.588000, X, Y) && !ellipse(25376.910000, 23922.140600, 1368.096039, 800.824023, 38.143000, X, Y) && !ellipse(24641.993200, 26825.986000, 803.648023, 803.648023, 0.000000, X, Y) && !ellipse(26065.011880, 24895.302200, 1053.912030, 1053.912030, 0.000000, X, Y) && !ellipse(27281.281400, 26524.330400, 1016.968029, 1016.968029, 0.000000, X, Y) && !ellipse(27340.575200, 25816.180600, 1119.232032, 1119.232032, 0.000000, X, Y) && !ellipse(22512.600200, 23221.440000, 2598.536075, 2598.536075, 0.000000, X, Y) && !ellipse(25123.931000, 24388.424164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24028.603973, 23450.715607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26860.832000, 23621.266000, 1171.832034, 1171.832034, 0.000000, X, Y) && !ellipse(25023.478000, 26665.266000, 1053.528030, 1053.528030, 0.000000, X, Y) && !ellipse(27200.476000, 24249.526000, 1004.048029, 1004.048029, 0.000000, X, Y) && !ellipse(28221.738000, 25582.530000, 2388.304069, 2388.304069, 0.000000, X, Y) && !ellipse(27310.217800, 25556.532000, 1049.376030, 1049.376030, 0.000000, X, Y) && !ellipse(25490.236600, 26062.423800, 1053.528030, 432.056812, 241.082000, X, Y) && !ellipse(26087.632000, 28103.368000, 1145.736033, 1145.736033, 0.000000, X, Y) && !ellipse(28125.696503, 26473.615143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26200.072784, 26307.131531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26657.114000, 27804.928000, 1479.208043, 1479.208043, 0.000000, X, Y)
[Sun Aug  5 02:50:07 2012] Writing fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src27.gif
[Sun Aug  5 03:33:54 2012] Mean detx,y = (2479.74, -2464.76) 
[Sun Aug  5 03:33:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 03:34:06 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 03:34:06 2012] Setting source spectrum file to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Aug  5 03:34:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Aug  5 10:27:05 2012] Updating aperture counts using extracted products
[Sun Aug  5 10:27:05 2012] Error reading totcts from fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Aug  5 10:27:07 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 10:27:07 2012] Using photon index=1.80, rate=0.00785, arf fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src27.arf
[Sun Aug  5 10:27:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 10:27:07 2012] Updating source flux to 7.9e-14
[Sun Aug  5 10:37:32 2012] Flag c found in src. 27 procflags, skipping spectral fitting